UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.  20549

 

FORM 10–K

 

ý

 

Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

 

 

 

 

 

for the fiscal year ended December 31, 2005, or

 

 

 

o

 

Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934.

 

MERIT MEDICAL SYSTEMS, INC.

(Exact name of registrant as specified in its charter)

 

Utah

 

0–18592

 

87–0447695

(State or other jurisdiction
of incorporation)

 

(Commission File No.)

 

(IRS Employer
Identification No.)

 

1600 West Merit Parkway

South Jordan, Utah 84095

(Address of principal executive offices, including zip code)

 

Registrant’s telephone number, including area code:  (801) 253–1600

Securities registered pursuant to Section 12(b) of the Act:  None

Securities registered pursuant to Section 12(g) of the Act:

Title of Class:  Common Stock, No Par Value

 

Indicate by check mark if the registrant is a well-known seasonal issuer, as defined in Rule 405 of the Securities Act.  Yes  o    No  ý

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes  o    No  ý

 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes  ý    No  o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S–K is not contained herein, and will not be contained, to the best of the Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10–K or any amendment to this Form 10-K.  ý

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer (as defined in rule 12b-2 of the Act) or a non-accelerated filer (Check one):  Large accelerated filer  o Accelerated filer  ý   Non-accelerated filer  o

 

Indicate by check mark whether the registrant is an accelerated filer (as defined in Rule 12b-2 of the Exchange Act).  Yes  ý    No  o

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes  o    No  ý

 

The aggregate market value of the Common Stock held by non–affiliates of the Registrant, on June 30, 2005, which is the last day of the Registrant’s most recently completed second fiscal quarter (based upon the closing sale price of the Common Stock on the NASDAQ National Market System on June 30, 2005), was approximately $386 million. Shares of Common Stock held by each officer and director and by each person who may be deemed to be an affiliate have been excluded.

 

As of March 2, 2006, the Registrant had 27,207,221 shares of Common Stock outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the following document are incorporated by reference in Part III of this Report: the Registrant’s definitive Proxy Statement relating to the Annual Meeting of Shareholders scheduled for May 25, 2006.

 

 



 

TABLE OF CONTENTS

 

PART I.

 

 

3

 

 

 

 

ITEM 1.

 

BUSINESS

3

 

 

 

 

ITEM 1A.

 

RISK FACTORS

14

 

 

 

 

ITEM 2.

 

PROPERTIES

17

 

 

 

 

ITEM 3.

 

LEGAL PROCEEDINGS

18

 

 

 

 

ITEM 4.

 

SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

19

 

 

 

 

PART II.

 

 

19

 

 

 

 

ITEM 5.

 

MARKET FOR REGISTRANT’S COMMON STOCK AND RELATED SHAREHOLDER MATTERS

19

 

 

 

 

ITEM 6.

 

SELECTED FINANCIAL DATA

21

 

 

 

 

ITEM 7.

 

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

22

 

 

 

 

ITEM 7A.

 

QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK

27

 

 

 

 

ITEM 8.

 

FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

28

 

 

 

 

ITEM 9.

 

CHANGES AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

52

 

 

 

 

ITEM 9A.

 

CONTROLS AND PROCEDURES

52

 

 

 

 

PART III.

 

 

54

 

 

 

 

ITEMS 10, 11, 12, 13, AND 14.

54

 

 

 

 

PART IV.

 

 

54

 

 

 

 

ITEM 15.

 

EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

54

 

 

 

 

SIGNATURES

58

 

2



 

PART I

 

Unless otherwise indicated in this report, “we,” “us,” “our,” and similar terms refer to Merit Medical Systems, Inc. and our consolidated subsidiaries.

 

DISCLOSURE REGARDING FORWARD-LOOKING STATEMENTS

 

This report includes “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”).  All statements other than statements of historical fact are “forward-looking statements” for purposes of these provisions, including any projections of earnings, revenues or other financial items, any statements of the plans and objectives of management for future operations, any statements concerning proposed new products or services, any statements regarding future economic conditions or performance, and any statements of assumptions underlying any of the foregoing.  All forward-looking statements included in this report are made as of the date hereof and are based on information available to us as of such date.  We assume no obligation to update any forward-looking statement.  In some cases, forward-looking statements can be identified by the use of terminology such as “may,” “will,” “expects,” “plans,” “anticipates,”  “intends,” “believes,” “estimates,” “potential,” or “continue,” or the negative thereof or other comparable terminology.  Although we believe that the expectations reflected in the forward-looking statements contained herein are reasonable, there can be no assurance that such expectations or any of the forward-looking statements will prove to be correct, and actual results could differ materially from those projected or assumed in the forward-looking statements.  Future financial condition and results of operations, as well as any forward-looking statements are subject to inherent risks and uncertainties, including market acceptance of our products, product introductions, potential product recalls, delays in obtaining regulatory approvals, cost increases, fluctuations in and obsolescence of inventory, price and product competition, availability of labor and materials, development of new products and techniques that could render our products obsolete, product liability claims, foreign currency fluctuations, changes in health care markets related to health care reform initiatives, and other factors referred to in our press releases and reports filed with the Securities and Exchange Commission (the “SEC”).  All subsequent forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by these cautionary statements.  Additional factors that may have a direct bearing on our operating results are described under Item 1A. “Risk Factors” beginning on page 14.

 

Item 1.    Business.

 

GENERAL

 

Merit Medical Systems, Inc. was formed in 1987 by a few members of our current management to produce high quality single-use medical products.  Our initial focus was on creating products to be used by doctors in diagnosing and treating cardiovascular disease.  Our early products were designed to enable physicians and other health care professionals to perform interventional and diagnostic procedures safely and effectively.  Early on, we were able to introduce innovative new products and capture significant market share because of our expertise in product design, our proprietary technology, and our skills in injection and insert molding.  Later, we developed an innovative product line of angioplasty inflation products that included electronic sensing and display features.  Angioplasty is a procedure used to clear out blockages and blood clots in arteries by inserting and inflating a small balloon in the clogged arteries.  We now market these devices along with a group of sensor–based products designed to be used by hospital personnel in various diagnostic and interventional catheterization procedures.  Catheterization refers to the process of inserting a catheter, usually into a patient’s arteries. Recently we have expanded our product offerings to include angiographic catheters, guide wires, needles, safety products, therapeutic infusion catheters and accessories, drainage catheters and accessories, sheath introducers, pressure infusion bags, syringes, kits, procedure trays.  Additionally, we have sought to improve on our line of core products.

 

We offer a broad line of innovative, disposable products designed to assist physicians in diagnosing disease and intervening in the areas of radiology and cardiology.  Sales of both new and existing products are increasing both in the United States and in foreign markets.  In the long run, we look to create new products based on our sensor–based technologies, plastics molding, catheter, guide wire, and electronic capabilities, and to develop products for diagnostic and interventional procedures in additional markets.  Our sales of stand-alone products, in combination with custom kits,

 

3



 

have increased as we have expanded our product lines.  In 2005, approximately 48% of our sales were made directly to U. S. hospitals and approximately 24% of sales were made to U.S. custom packagers, distributors and original equipment manufacturers, or “OEM”, companies.  Approximately 27% of our sales in 2005 were made in international markets.  Approximately 1% of our sales were non-medical, including sensors.

 

Our company was organized in July 1987 as a Utah corporation.  In July 1994, we purchased a controlling interest in Merit Sensor Systems, Inc. (formerly Sentir, Inc.), a California-based manufacturer of silicon sensors, and during 1999, we purchased the remaining interest in Merit Sensor Systems, Inc.  We have established subsidiaries in Ireland, Germany, France, the United Kingdom, Belgium, and The Netherlands to conduct international business.  In January 1997, we purchased the operating assets and product lines of Universal Medical Instruments Corp, or UMI.  In August 1999, we purchased the operating assets and product lines of the Angleton, Texas division of Mallinckrodt Inc.  In 2000, we purchased the assets of Electo Catheter Corp., also known as Elecath.  In November 2004, we purchased substantially all of the assets of MedSource Packaging Concepts LLC (“MedSource”).    In March 2005, we bought substantially all of the assets of Sub-Q, Inc (“Sub-Q”).  On December 30, 2005, we acquired all of the capital stock of MCTec Holding B.V, a Dutch company in the business of coating wires and tubings for medical devices.  Our principal offices are located in manufacturing and office facilities at 1600 West Merit Parkway, South Jordan, Utah, 84095, and our telephone number is (801) 253–1600.   See “Item 2. Properties.”

 

PRODUCTS

 

We have designed and developed our products in response to the needs of customers and patients.  We identify these needs primarily by observing procedures in cardiac catheterization and radiology laboratories, by consulting with our medical advisors and consultants, and by communicating directly with customers.  Since 1988, we have developed and introduced several product lines, including the following:

 

  coronary control syringes (CCS™, Smart Tip™ Inject8™, and Inject10n™)

 

  inflation devices (IntelliSystem®, Monarch®,™, Viceroy™, basix™, basixCOMPAK (including new 30-atmosphere versions), and monitors (IntelliSystem® and IntelliSystem II™)

 

  specialty syringes (Medallion® and VacLok®)

 

  high-pressure tubing and connectors (Excite™, flexible, braided, rigid, PVC)

 

  waste management products (Merit Disposal Depot™, MDD600™, Backstop®, Backstop Plus™, Dugout®, MiniStop™ and MiniStop Plus)

 

  disposable blood pressure transducer (Meritrans®); and pressure monitoring tubing

 

  disposable hemostasis valves and accessories (MAP™, MBA™, Passage®, Access9™, AccessPlus™, DoublePlay™, RXP™) and guide wire torque devices

 

  manifolds and stopcocks (Marquis® series)

 

  radial artery compression systems (RadStat®)

 

  contrast management systems drip sets and spikes (Miser® and In Line Contrast Management System™,)

 

  medication labeling system (Merit PAL™ pen and labels)

 

  angiography needles and accessories (Majestik® series, Majestik® Shielded Needle, Captiva®, ShortStop®, SecureLoc™ and A.S.K. Merit Safety Access Kits™)

 

  drainage catheters and accessories (Resolve®, non-locking drainage catheters, One Step™ centesis cathethers and SPPT paracentesis kits, Revolution™ and StayFix™ drainage accessories)

 

  pericardiocentesis catheters and procedure trays

 

  thrombolytic infusion catheters and accessories (Fountain®, Mistique® and Squirt®)

 

  diagnostic angiographic pigtail catheters, diagnostic cardiology and radiology catheters, and marker band catheters (Impress™, SofTouch® and Performa®)

 

  guide catheters (Trax®)

 

  percutaneous sheath introducers and vessel dialators (Prelude™, DialEase™, Thomas Medical®, Merit MAK® and S-MAK Mini Access Kits)

 

  diagnostic guide wires (Inqwire®), and accessories (Keep™ and Ringmaster™), and hydrophilic guide wires, (Merit H20®)

 

  pressure infusor bags

 

  custom and standard procedure trays and packs, drapes and prep kits

 

4



 

These products are sold separately, and many are sold in custom kits consisting primarily of selected combinations of products.

 

We have not experienced any significant product liability claims; however, the sale and use of our products entail inherent risks that customers may assert product liability claims against us.  We maintain product liability insurance in the amount of $10,000,000 per occurrence and $10,000,000 in the aggregate, which may not be adequate to cover potential expenses or liabilities we could incur if we face a products liability claim.  We also maintain product liability insurance for events in the United Kingdom in the amount of 5,000,000 GBP (Great Britain Pounds) per occurrence and in the aggregate, which also may not be enough to cover our actual expenses or liabilities.

 

The following paragraphs briefly describe and provide other information regarding our products:

 

Inflation Devices and Angioplasty Accessories.  Angioplasty is a procedure used to clear blockages in arteries by inserting and inflating a small balloon in the clogged arteries.  Our inflation devices are large, specialized syringes used to inflate balloon-tipped catheters in angioplasty procedures.  Our inflation devices incorporate patented, proprietary design features which contribute to their ease of use, including features that allow clinicians to engage or release the syringe plunger with one hand.  Each syringe also provides a clear view of the fluid path; this makes it easier for the user to debubble and to accurately measure the pressure in the syringe.

 

Our IntelliSystem® inflation device, which was the first such device to incorporate electronic sensing and display features, is a disposable 20cc inflation syringe with an internal pressure transducer which connects to a monitor outside of the sterile field.  The IntelliSystem® monitor measures, times, records, and digitally displays information concerning the pressure, duration and number of each inflation and deflation of the angioplasty balloon.  We believe that electronic sensing and display of such information is more accurate and precise than most conventional analog gauges.  By using electronic sensors, important data can be stored and later retrieved, displayed and printed.

 

In 2003, we launched the patented IntelliSystem II™ color monitor, an advanced balloon inflation system.  It gives physicians several desirable options, including a large color touch screen, an instant readout of positive and negative pressures, and an enlarged graphing display to show subtle changes in pressure measurements.  In addition, the readouts are available in four languages.  The user can change settings and programming by simply touching the screen.   Management believes that Merit is the only company with digital technology sensitive enough to show subtle changes in pressure.

 

The Monarch® is a disposable inflation device that digitally displays data concerning pressure and duration of inflations and deflations on a small digital readout mounted on the barrel of the inflation syringe.  This small digital readout monitor does not offer the same display, storage or printing capabilities of the IntelliSystem® & IntelliSystem II™, but does offer the convenience of portable, digital operation.  In 2003, we launched a 30-atmosphere version of the Monarch® to provide clinicians with additional options.

 

The Viceroy™, Basix® and the BasixCOMPAK™ are disposable inflation syringes that incorporate conventional analog pressure gauges mounted on the barrels of inflation syringes.  The Basix® resembles devices marketed by our competitors, but includes our proprietary design features and benefits.  We believe the Basix® and BasixCOMPAK™ represent significant additions to our line of inflation devices, and will contribute to increased sales where both clinical outcomes and pricing are priorities.

 

Hemostasis Valves.   Hemostasis refers to the stoppage of bleeding in an injured blood vessel.  We sell a line of hemostasis valves designed to complement our inflation devices.  These valves are also sold as a part of our angioplasty product packages.  This line of valves includes the MBA™, Passage®, AccessPlus™, Access 9™, and Double Play™, hemostasis valves.  These valves are made of clear polycarbonate plastic for strength and clarity; however, the devices vary in size and function.  The MBA™ features a valve mechanism that minimizes blood loss during exchange of wires, catheters and other tools through the valve.  The Access Plus™ and Access 9™ are large-bore configurations.  The Double Play™ incorporates a double “Y” configuration for kissing-balloon techniques.

 

5



 

Torque Devices.  Our standard torque device used in interventional procedures is a guide wire steering tool with a tapered design and contrasting colors for improved visibility.  The torque device typically is included as a component of our angioplasty packs.  We also provide a variety of torque devices used for diagnostic and hydrophilic guide wires (H20 Torq™).

 

Coronary Control Syringes.  Our disposable control syringes are utilized for one–handed control of the injection of contrast media and other fluids during angiography, angioplasty, and stent placement.  A stent is a device that is inserted into a vessel or passage to keep it open and prevent closure due to stricture or external pressure.  Control syringes are molded from polycarbonate material, which is tougher than glass and most other plastics used in the medical products industry.  We offer different models and sizes of the control syringes with varying features, according to physician preference.  These features include different configurations of syringe handles, plungers, and connectors which allow operation of the syringe in a fixed or rotating position and varying volume sizes.  In response to customer need and request for smaller diameter diagnostic and guiding catheters, we have also developed several designs of control syringes that provide the user with higher injection pressures.  All of our control syringes are latex-free.

 

Specialty Syringes.  Our Medallion® syringes, a line of disposable, latex-free, color-coded specialty syringes, are used for injection of medications, flushing manifolds and other general purposes.  The 60ml VacLok® syringe is used to create negative pressure.  There are multiple clinical applications for a negative pressure syringe, including abscess drainage and biopsy, balloon preparation, nephrostomy drainage, and more.  These syringes are molded of polycarbonate material for added strength and are available in hundreds of sizes, colors and custom printing combinations.  We color-code our syringes to minimize medication errors; color-coding allows doctors to assign a color for each medication to be dispensed and to differentiate syringes by their contents.  Our Medallion® syringes can be customized with medication names and strengths to meet the requirements set forth by the Joint Commission on Accreditation of Healthcare Organizations, or JCAHO, and other governing bodies. We believe that the design, color-coding and materials used in our specialty syringes contribute to patient safety and more efficient procedures.  We sell the specialty syringes separately as well as in our custom kits.

 

Marquis™ Series Stopcock.  Our Marquis™ Series Stopcock offers improvements to competitive stopcock devices, including a large, easy-grip handle.  Stopcocks are manufactured in numerous design configurations and styles, including 1-way, 3-way, 4-way, 50 pounds per square inch (“psi”) to 1050 psi, on and off handles, fixed luer, rotating luer, and slip luer.

 

Large-Bore Stopcock.  The Large-Bore Stopcock is designed to facilitate fluid movement.  The large internal diameter, measuring 0.120 inches, is designed to move drainage fluid from the body.  Like all of our stopcocks, the large-bore version incorporates a clear body for easy visualization and a large, easy-to-manipulate handle.   We have also incorporated this stopcock in several other products such as pressure infusor bags and drainage kits.

 

Manifolds.  Manifolds have a series of valves which control the flow of various fluids.  Manifolds are generally used to administer saline, imaging, and contrast fluids, as well as to manage blood-pressure, fluid injection and waste collection in angiography or angioplasty procedures.  We have designed our own manifold products consisting of one, two, three, four, or five valves.  When compared to manifolds sold by competitors, we believe that our manifold is easier to use, simplifies identification of flow direction, and provides leak–free operation under the pressures of manual or mechanical fluid injection.  Our manifold is sold separately as well as in our custom kits.

 

High-Pressure Contrast Injection Line.  During angiographic and diagnostic radiology procedures, a different colored fluid is injected through a catheter into a patient’s artery or vein.  This is sometimes accomplished by a mechanical injector which can generate pressures up to 1200 psi, and requires tubing that can withstand these pressures.  We offer high-pressure, braided and clear, specialty tubing.  Excite™ is a line of clear, flexible, high-pressure tubing that combines the features of tubing clarity and strength.  The connectors allow coupling and uncoupling of tubing with injectors, syringes and manifolds without over-tightening or breaking.  We currently offer specialty tubing that can handle pressures ranging from 500 to 1200 psi.  The specialty tubing is an important component of custom kits.

 

RadStat® Radial Artery Compression Device.   The RadStat® Radial Artery Compression Device is intended to apply direct pressure to the radial artery puncture site after diagnostic and interventional procedures.  In addition to rapid controlled hemostasis, the RadStat® immobilizes the wrist comfortably, facilitating a patient’s recovery.

 

6



 

Waste Containment Systems.  Because of heightened awareness of the risks associated with blood and related waste materials, hospitals have moved toward closed systems whenever possible.  To address these concerns, we have designed a waste containment bag which connects to a manifold in a closed system and collects waste materials such as blood and other fluids during angioplasty or other procedures.  Our Disposal Depot™ is self-contained for simplified disposal and reduced risk of contamination.  The Backstop® and Backstop Plus™ are unique and proprietary alternative fluid disposal basins designed to reduce exposure to blood-borne pathogens.  The DugOut®, a large volume (1000 ml) line extension to the Backstop®, also contains an additional compartment for the storage of accessories.  The MiniStop™ and MiniStop Plus™ are designed to meet the needs of clinical procedures that accumulate smaller volumes of waste.

 

Contrast Management Systems.  The Miser™ and the In Line Contrast Management System™ are designed to reduce the waste of various contrast media, or colored fluid, and increase catheterization lab efficiencies.  The Miser system’s blue fluid level indicator disk is designed to minimize air from entering the contrast line and to potentially be injected into the patient.   We believe that this small system helps hospitals save thousands of dollars a year in wasted contrast.

 

Majestik® Angiographic Needles.  The angiography needle creates the percutaneous (through the skin) access site for virtually all invasive diagnostic and interventional procedures performed in cardiology and radiology.  The needle provides the initial point of entry site for the introducer sheath, guide wires, catheters and any other diagnostic and interventional devices.  Our Majestik® needle helps physicians achieve precise vascular access with one of the sharpest angiography needles on the market.

 

Majestik® and SecureLocShielded Angiography Needles.  The Needlestick Safety and Prevention Act passed by the United States Congress in November 2000 requires healthcare employers to document their exposure control plan and evaluate safety-engineered products to protect clinicians.  In 2002, we launched a new line of shielded, 18-gauge angiography introducer needles designed to meet the requirements of the law.  We believe that the Majestik® shielded needle is one of the first safety-engineered devices designed to promote safer needles in cardiology and radiology.  The SecureLoc™ Shielded Needle (trademark of Specialized Health Products International, Inc.) launched in 2005 provides a second clinical alternative.  We launched the A.S.K. Merit Safety Access Kits™ in early 2003, which include protected scalpels and needles used for vascular access.

 

Fountain® and Mistique® Infusion Catheters.  Vascular occlusion is a common anomaly that affects millions of patients each year.  Both the Fountain® and the Mistique® catheters deliver therapeutic solutions intended to dissolve blood clots in peripheral arteries, hemodialysis grafts and deep veins.  The Fountain® catheter utilizes an occluding wire to effectively block off the end hole and direct the infusion therapy uniformly through the laser-drilled side holes.  The Mistique® is designed to be used over standard 0.035 or 0.038 guide wires to block off the end hole and direct the infusion therapy uniformly through the side holes.

 

Squirt® Fluid Dispensing System.  The Squirt® fluid dispensing system is a unique and proprietary product designed to deliver fluid in a controlled, accurate and consistent manner.   The device is available stand-alone as well as packaged with the Fountain® Catheter.

 

Prelude and DialEase® Introducer Sheaths.  In 2005, we launched the Prelude™ Sheath Introducer, a new beginning in vascular access.  The product was specifically designed to meet customer requirements.  The DialEase® Introducer Sheath (a registered trademark of Thomas Medical) is a short introducer ideally suited for dialysis graft intervention.  It is commonly used in conjunction with the Fountain® and Mistique® therapeutic infusion catheters to declot dialysis grafts.

 

Merit MAK and Merit S-MAK Mini Access Kits.   In 2004, we introduced the Merit MAK Mini Access Kit for those clinical applications requiring small,  21-gauge needle introduction.  Kit configurations provide the necessary components for vascular access.  The S-MAK was recently launched with a stiffened version of the standard product.

 

Vessel Dilators.   Dilators are used to dilate puncture sites.  They are commonly used in radiology and cardiology over a 0.035” or 0,038” guide wire to dilate the site prior to placing sheaths and catheters in the femoral artery.

 

7



 

InQwire® Diagnostic Guide Wires.  Guide wires consist of a small-diameter wire tightly wrapped in a coated wire coil.  Production of these wires requires considerable technology, and we utilize our guide wire center of excellence in Ireland to manufacture the InQwire® Diagnostic Guide Wire.  Guide wires vary in length, outside diameter and tip configuration, and are used to place either a diagnostic or therapeutic catheter into a patient’s cardiovascular system.  In late 2003, we launched a line of hydrophilic guide wires (Merit H20).

 

Merit H20® Hydrophylic Guide Wires and Accessories.   In late 2003, we launched a line of hydrophilic guide wires.  The H20 Torque™ guide wire torque device complements the guide wire offering.

 

RingMasterThe RingMaster™ guide wire basin allows clinicians to conveniently store guide wires to maintain sterility and organization.  It separates wires for quick selection, uses less table space than conventional basins because it is stackable, and helps keep wires hydrated throughout the procedure.

 

Pericardiocentesis Kit.  On occasion, the pericardial sac surrounding the heart becomes filled with blood or fluid.  To remove the fluid and the potential for heart strangulation, a catheter is placed in the pericardial sac to drain the excess fluid.  We offer a complete pericardiocentesis kit that combines a high-flow drainage catheter with all components needed to place the device in the pericardial sac.  We believe that the kit combination saves physicians both time and money by having all components in one convenient tray.

 

One-Step Centesis Catheter.  The One Step™ centesis catheter is intended to be used for short-term centesis procedures.  It incorporates a luer-locked introducer needle for secure, one-handed placement.  The tip of the introducer needle is echogenically enhanced for visualization during ultrasound-guided placement.  The transition between the catheter and needle is smooth to facilitate insertion.  In 2003, we launched a new line of safety kits including the One-Step centesis catheter.

 

Resolve® Universal Drainage Catheter with Non-Locking Pigtail.  The Resolve® Universal Drainage Catheter with non-locking pigtail is a standard drainage catheter designed to expand our drainage products offerings.

 

Revolution™ and StayFix™ – Catheter Fixation Devices.  The Revolution™ is the most recent addition to our drainage accessory line of products.  The Revolution™ is a three-point catheter fixation device that allows visibility of the puncture site.  The StayFix™ is a one-piece catheter tube securing device and dressing for percutaneous drainage sites.  These products provide comfortable, low-profile fixation for catheters and tubes.  Catheter securement devices are used in interventional radiology, special procedures, cardiology, urology, home health care, and skilled nursing facilities.

 

MDD600Our Disposal Depot™ is specifically designed to temporarily collect fluids.  It incorporates a drainage spout for quick and easy fluid disposal, and an internal anti-reflux valve to help prevent fluid from backing up the line.  The bag also comes packaged with an adjustable velcro strap that can be used to attach the device to the patient’s waist or leg.

 

Meritrans® Pressure Transducer and Accessories.  Diagnostic blood pressure monitoring is a critical priority in virtually all diagnostic and interventional procedures.  We believe that Meritrans® provides clinicians with reliable and precise blood pressure measurement and that the clear flow-through design makes flushing and debubbling simple and safe.  The transducer is a vital component of many custom kit configurations.  Pressure Monitoring Tubing and Stopcocks are common ancillary products to complement the Meritrans®.  We provide several reusable accessories to support the Meritrans®.  The Merit Mentor™ is a transducer calibration and troubleshooting device that insures accuracy and repeatability of physiologic pressure measurements.  Reusable transducer cables connect the Meritrans® to the bedside monitor.  Organizing brackets hold multiple transducers to beds and IV poles according to the needs of the user.

 

Pressure Infusor Bag.  Our pressure infusor bags include proprietary over-pressure relief valves.  These devices are used in multiple clinical areas to apply pressure to a sealed bag of fluid, such as IV solutions or blood products.  The pressure exerted is shown by a color-coded pressure gauge, and the device has a valve that releases pressure to prevent inadvertent over-pressurization.  The device also has patented technology that allows the user to choose between 300 and 400 mmHg of pressure exerted on the bag.

 

8



 

ShortStop®.  The ShortStop®, a small, temporary sharps container with an adhesive base that fits on the back table in a clinical lab, is used for the temporary containment of needles, scalpels and other sharp tools to help prevent inadvertent clinician injury.  Smaller versions of the ShortStop® have recently been added as differentiating features to the Backstop Plus™ and MiniStop Plus™.

 

Universal Fluid Dispensing Syringe.  In addition to angioplasty, angiography, and radiology, our digital inflation devices (IntelliSystem® and Monarch® products) can be used in additional clinical applications such as discography, esophageal dilatation, trigeminal nerve compression and the repair of retinal detachment.  Universal fluid dispensing syringes incorporate patented, proprietary features designed to increase ease of use, including features allowing clinicians to engage or release the syringe plunger with one hand while increasing or decreasing pressure.  Each syringe also provides a clear view of the fluid path that simplifies debubbling and contributes to accurate pressure measurement.  When used in clinical applications such as discography, the IntelliSystem® accurately dispenses fluid while documenting and graphing pressures in the disc.  We believe that electronic sensing display of such information is more accurate and precise than standard syringes and conventional analog gauges.  The electronic sensor stores data, which can be retrieved, displayed, graphed and printed.

 

Diagnostic Cardiology Catheters.  Doctors perform cardiac catheterization to diagnose the nature, severity, and precise location of blockages and other abnormalities of the heart.  We believe this technique is the most essential diagnostic tool in managing patients with cardiovascular disease.  We manufacture both the Performa® and Softouch® Line of diagnostic catheters used for these procedures.

 

Diagnostic Peripheral Radiology Catheters.   The Impress™, Performa®, and Softouch® peripheral catheters are engineered and designed with distinct tip configurations to access specific vessels and organs outside the heart (head, kidneys, legs, etc).  We acquired a series of peripheral catheter products from Mallinckrodt’s Angleton division in 1999.  Since then, we have invested in significant product improvements and line extensions.

 

Angiography Pigtail Catheter.  Our thin-wall, PTFE, high-flow, pigtail angiographic catheters are designed specifically for use with smaller patients.

 

Vessel-Sizing Catheters.  Our adult vessel-sizing catheters are used to measure the internal diameters and lengths of blood vessels under fluoroscopy.  Procedures in which these catheters are used include angioplasty, embolization, abdominal aortic aneurysm (AAA) stent-grafts and vena cava filter placements.  We also offer pediatric vessel-sizing catheters.

 

Guide Catheters.  Angioplasty requires guiding catheters to place balloons within a patient’s arteries.  Catheters are inserted through sheaths into the arterial system.  Once in place, guiding catheters act as conduits for guide wires, dilating balloon catheters, stents, and radiopaque dye that is used to provide fluoroscopic visualization during interventional procedures.

 

Medication Labeling System.    The Merit PAL (pen and labels) is a strategically designed medication labeling system that complies with JCAHO’s latest patient safety goals.  The labels have been designed to be placed on syringes, medicine cups, bowls and other procedural basins that hold fluids and drugs.

 

Custom Kits.  Custom kits allow physicians to obtain the medical devices and accessories they most frequently use during angiography, angioplasty and similar procedures in a convenient, pre-packaged and preassembled form.  Custom kits also provide cost savings over purchasing single products and reduce hospitals’ administrative costs associated with maintaining inventory of individual, sterile products.

 

Procedural Trays and Packs.   Our 2004 acquisition of the Medsource assets enabled us to add a new level of service to customers through the distribution of a comprehensive line of custom procedure packs and trays.

 

MARKETING AND SALES

 

Target Market/Industry.  Cardiovascular disease continues to be a leading health problem in the United States.   According to American Heart Association estimates, 70 million Americans, or approximately 24% of the population, have one or more types of cardiovascular disease.  Cardiovascular disease accounts for more than one million deaths annually, more than 40% of the U.S. total.  We derive a majority of our sales revenues from products used

 

9



 

in angiography and angioplasty procedures designed to treat cardiovascular disease.  We believe that the greatest potential to diagnose and treat the disease comes from the use of transcatheter technologies, meaning products utilizing vascular catheterization procedures such as balloons, bare metal and drug eluding stents, and technologies aimed at defect repair.  We intend to pursue additional our sales growth by building on our existing market position in both catheter technology and accessory products.

 

The global market for transcatheter products stands at a major crossroad, even when considering the continued dynamic evolution in vascular stent placement.  The core diagnostic and therapeutic applications for basic transcatheter technologies (balloons, stents and defect repair) are well established, with the future growth of procedures and products dependent upon demographic trends.  Several companies, however, are researching and developing new technologies and applications designed to enhance patient outcomes and enable the treatment of new populations that have been traditionally limited to surgical intervention.  Much of this additional research and development has led to new or enhanced procedures, devices and drugs designed to treat or prevent cardiovascular disease.  These procedures, devices and drugs include laser angioplasty, atherectomy procedures and drug therapies.  Because these new procedures and therapies do not involve the use of catheterization, they may either render some of our products obsolete or limit the markets for our products.  However, with the advent of vascular stents and other procedures, such as discography and kyphoplasty, we have experienced continued growth in our proprietary inflation technology.  We are monitoring trends in the industry and believe that we are in a position to launch catheters and accessories to support growing clinical applications.

 

A large number of current research and development projects focus on improving the diagnosis of cardiovascular disease, improving the issue of restenosis, and developing other less invasive alternatives to open-heart surgery.  In recent years, researchers have focused their interests on technologies and products that support the increased use of transcatheter approaches to reduce the mortality rate of cardiovascular disease.  These new technologies and procedures include drug-coated stents, radiated stents and balloons, anti-platelet therapy, gene therapy, percutaneous coronary thrombectomy, and transmyocardial revascularization.  One area of specific interest to us is transradial catheterization, in which a doctor introduces vascular catheters through the radial artery, allowing a patient’s rapid recovery, which ultimately reduces total patient cost.  We plan to continue to develop and launch innovative products to support these clinical trends.

 

Market Strategy.  Our marketing strategy is focused on identifying and introducing a continual flow of highly profitable, differentiated products that meet customer needs.  In order to stay abreast of customer needs, we seek suggestions from hospital personnel working with our products in cardiology and radiology applications.  Suggestions for new products and product improvements may come from engineers, sales people, physicians and technicians who perform the clinical procedures.

 

When we determine that a product suggestion demonstrates sustainable competitive advantage, meets customer needs, fits strategically and technologically with our business, and has a good potential financial return, we assemble a “project team” comprised of individuals from our marketing, engineering, manufacturing, legal, and quality assurance departments.  This team identifies the customer requirements, integrates the design, compiles all necessary documentation and testing, and prepares the product for market introduction.  We believe that one of our marketing strengths is our capacity to rapidly conceive, design, develop, and introduce new products.

 

U. S. Sales.  Our direct sales force currently consists of a Vice President of Sales, eight regional sales managers and 63 direct sales representatives and clinical specialists located in major metropolitan areas throughout the United States.  Our sales people are trained by personnel at our facilities, by a senior sales person in their respective territories, at regular national and regional sales meetings, by consulting cardiologists and employees of the Company, and by observation of procedures in catheterization laboratories.

 

International Sales.  Approximately 100 independent dealer organizations distribute our products worldwide, including territories in Europe, Asia, South and Central America, and Canada.  We have appointed a Vice President for International Sales outside Europe and the United States.  We also have a Vice President of European Sales and an international sales and distribution office in Maastricht, The Netherlands.  Approximately 18 direct sales representatives presently sell our products in Germany, France, the United Kingdom, Belgium, The Netherlands, and Ireland.  In 2005, our international sales grew by 21% and accounted for approximately 27% of total sales.  With the recent and planned additions to its product lines, we believe that our international sales will continue to increase.

 

10



 

We generally require our international dealers to inventory products and sell directly to customers within defined sales territories.  Each of our products must be approved for sale under the laws of the country in which it is sold.  International dealers are responsible for compliance with all applicable laws and regulations in their respective countries.

 

OEM Sales.   We currently have an OEM division that sells molded components, sub-assembled goods, and bulk non-sterile goods, which may be combined with other components and/or goods from other companies and then sold under a Merit or non-Merit label.   We engage in both international and domestic OEM sales.

 

CUSTOMERS

 

We serve hospital-based cardiologists, radiologists, anesthesiologists, physiatrists (pain management physicians), neurologists, technicians, and nurses, all of whom influence the purchasing decisions for our products.   Hospitals and acute care facilities in the United States purchase our products through our direct sales force, distributors, OEM relationships, custom packagers and packers who assemble and combine products in custom kits and packs.  Outside the United States, hospitals and acute care facilities purchase through our direct sales force, or in the absence of a sales force, through independent distributors or OEM relationships.

 

In 2005, approximately 48% of our sales were made directly to domestic hospitals, approximately 24% to custom tray manufacturers and domestic dealers, approximately 27% to international markets, and approximately 1% were non-medical.  Sales to our single largest customer, a packer, accounted for approximately 6% of total sales during the year ended December 31, 2005.  We manufacture products for other medical device companies through our OEM program.  During the year ended December 31, 2005, OEM sales represented approximately 14% of our total revenue, which included 2% purchased by international OEM companies.

 

RESEARCH AND DEVELOPMENT

 

We believe that one of our historic strengths has been our ability to quickly adapt our expertise and experience in injection molding, insert molding, catheter extrusion, guide wire assembly, and electronic and sensor technologies, and to apply these core competencies to a perceived need for a new product or product improvement.  Our development efforts are presently focused on disposable, innovative single-patient or single-use items, which can be included in our custom kits or sold separately.

 

Our executive officers devote a portion of their time to research and development.  Research and development expenses were approximately $7.0 million, $5.1 million, and $4.6 million in 2005, 2004, and 2003, respectively.  We did not conduct any customer-sponsored research and development during those periods.  We anticipate that our research and development expenses will range between approximately 4% and 5% of net sales during the year ending December 31, 2006.

 

MANUFACTURING

 

We manufacture many of our products utilizing our proprietary technology and our expertise in plastic injection and insert molding.  We contract with third parties for the tooling of molds, but we design and own all of our molds.  We utilize our experience in injection and insert molding technologies in the manufacture of most of the custom components used in our products.

 

We either assemble the electronic monitors and sensors used in our IntelliSystem® and Monarch® inflation devices from standard electronic components or we purchase them from suppliers.  In July 1994, we acquired a 73% interest in Merit Sensor Systems, Inc., which develops and markets silicon sensors.  In August 1999, we acquired the remaining interest in that company.  It is presently supplying virtually all of the sensors we utilize in our digital inflation devices.

 

Our products are manufactured at several factories including our own facilities located in South Jordan, Utah; Santa Clara, California; Galway, Ireland; Angleton, Texas; Chester, Virginia as well as a leased expansion facility in Murray, Utah.  With the acquisition of MCTec in December 2005, our manufacturing activities expanded to a new facility in Venlo, The Netherlands.  See “Item 2. Properties.”

 

11



 

We believe that our variety of suppliers for raw materials and components necessary for the manufacture of our products, as well as our long-term relationships with such suppliers, promote stability in our manufacturing process.  Historically, we have not been materially affected by interruptions with such suppliers.  Further, we have developed contingency plans to engage back-up suppliers, materials and components in the event of supply interruptions.

 

COMPETITION

 

We compete in the domestic and international radiology and cardiology markets, which encompass a large number of suppliers of many different sizes.  We compete with more than 30 different companies.  These firms include small firms, such as Possis Medical and Microtherapeutics; medium-sized companies like Cook, Arrow, and Angio Dynamics; and large, international, multi-supply medical companies, such as Johnson & Johnson, Boston Scientific, Guidant, Medtronic, and C.R. Bard.   Many of our competitors have substantially greater financial, technical, and marketing resources than we do.

 

The principal competitive factors in the markets in which our products are sold are quality, performance, service, breadth of line, and price.  We believe that our products have achieved market acceptance due, in part, to the quality of materials and workmanship, innovative design, ease of operation, and our prompt attention to customer inquiries.  Our products are priced competitively, but generally not below prices for competing products.  One of our primary competitive strengths is a comprehensive, broad line of ancillary products used in both cardiology and radiology.

 

Based on available industry data with respect to the number of procedures performed, we believe that we are one of two market leaders in the United States for control syringes, tubing, and manifold kits (together with NAMIC USA Corporation, a subsidiary of Boston Scientific), and we are the world market leader for inflation devices and hemostasis accessories.  We also believe that the recent and planned additions to our product lines will enable us to compete more effectively in both U.S. and international markets.  For example, our new IntelliSystem® II color monitor provides considerable improvements, including visibility of pressure data in our existing, patented digital technology.   We believe that we are a leading provider of digital inflation technology in the world.  There is no assurance, however, that we will be able to maintain our existing competitive advantages or compete successfully in the future.

 

We derive a substantial majority of our revenues from sales of products used in diagnostic angiography and interventional angioplasty procedures.  Medical professionals are starting to use newer procedures, devices, and drugs for the treatment and prevention of cardiovascular disease such as laser angioplasty, atherectomy procedures, and drug therapies, the effect of which may be to render some of our products obsolete or to limit the markets for our products.  However, with the advent of vascular stents and other procedures such as discography, we have experienced continued growth in its proprietary inflation technology.

 

PATENTS, LICENSES, TRADEMARKS AND COPYRIGHTS

 

We consider our proprietary technology to be important in the development and manufacture of our products.  We seek to protect our technology through a combination of patents, trademarks, trade secrets, copyrights, and confidentiality agreements.   We generally seek patent protection of our technology in the United States and certain foreign countries where such protection appears to be advantageous.  We have received 97 issued U.S. and foreign patents, and other U.S. and foreign patent applications are currently pending.  The U.S. Patent Office issued nine patents to us during 2003, 2004 and 2005.  These patents are directed to the following innovations:

      U.S. Patent No. 6,508,789 is directed to an innovative drainage catheter design

      U.S. Patent No. 6,533,757 is directed to a further improvement to our IntelliSystem® II system for monitoring and displaying pressurization data

      U.S. Patent No. 6,537,266 is directed to an innovative puncture guard for catheter wires

      U.S. Patent No. 6,547,072 is directed to our innovative RingMasterTM stackable guide wire basins

      U.S. Patent No. 6,572,590 is directed to an innovative hemostasis valve having a quick release lever

      U.S. Patent No. 6,719,017 is directed to our DugOut® disposal basin

      U.S. Patent No. 6,800,069 is directed to an innovative modularized infusion pump

      U.S. Patent No. 6,814,427 is directed to innovative systems and methods for accurately measuring fluids

      U.S. Patent No. 6,966,893 is directed to an innovative over pressurization relief apparatus.

 

12



 

 

We believe that our patents and pending patent applications are materially important to our business, but we do not believe that our business is dependent on securing such patents.  We also operate under licenses from other owners of certain patents, patent applications, technology, trade secrets, know-how, copyrights, or trademarks.  We believe, however, that no single patent, patent application, technology, trade secret, know-how, copyright, trademark, or license is material in relation to our business as a whole.

 

Although certain of our patents related to inflation devices will expire in 2008 and other patents will expire thereafter, we expect that related products will continue to be valuable, in part because of proprietary innovations made since the issue of the initial patent.  In 1992, we granted a license to use our patented IntelliSystem® and Monarch® inflation devices.  In return, we are receiving a 5.75% ongoing royalty from the licensee, not to exceed $450,000 annually. Royalties paid for such license in each of 2005, 2004, and 2003 were $450,000.

 

While we have obtained U.S. patents and filed additional U.S. and foreign patent applications, there can be no assurance that any patents we hold will provide us with any significant competitive advantages, that third parties will not challenge our patents, or that patents owned by others will not have an adverse effect on our ability to conduct business.  We could incur substantial costs in preventing patent infringement, in curbing the unauthorized use of our proprietary technology by others, or in defending against similar claims of others.  Since we rely on trade secrets and proprietary know-how to maintain our competitive position, there can be no assurance that others may not independently develop similar or superior technologies.

 

We operate in an increasingly competitive medical technology marketplace.  There has also been substantial litigation regarding patent and other intellectual property rights in the medical device industry.  There are risks that our activities may require us to defend against claims and actions alleging infringement of the intellectual rights of others.  If a court rules against us in any patent litigation, any of several negative outcomes could occur: we could be subject to significant liabilities, we could be forced to seek licenses from third parties, or we could conceivably be prevented from marketing certain products.  Any of these outcomes could have a material adverse effect on our business.

 

We have also registered or applied for registration of several trade names or trademarks.  See “Products” above.  We have received 120 U.S. and foreign trademark registrations, and other U.S. and foreign trademark applications are currently pending.  We place copyright notices on our instructional and advertising materials and have registered copyrights relating to certain software used in our electronic inflation devices.

 

REGULATION

 

The U.S. Congress has passed the Federal Food, Drug, and Cosmetic Act.  Under that act and through its own rules, the U.S. Food and Drug Administration (“FDA”) regulates the development, testing, packaging, labeling, and marketing of medical devices and manufacturing procedures relating to these devices.  In general, the FDA requires that manufacturers adhere to certain standards designed to ensure the safety and effectiveness of medical devices.  We employ a Vice President of Regulatory Affairs and a Vice President of Quality Systems who are responsible for compliance with all applicable FDA regulations.  Although we believe that we are currently in material compliance with these requirements, any failure on our part to comply with all applicable current and future regulations could adversely affect our business.

 

The FDA’s Quality Systems Regulations standards regulate our manufacturing processes, require the maintenance of certain records, and provide for unscheduled inspections of our facilities.  We must also comply with certain requirements of state, local, and foreign governments in the manufacture and marketing of the Company’s products.

 

New medical devices may also be subject to either the Section 510(k) Pre-Market Notification regulations or the Pre-Market Approval, or “PMA,” regulations promulgated by the FDA and similar regulatory authorities in foreign countries.  New products in either category require extensive documentation, careful engineering and manufacturing controls to ensure quality.  Products needing PMA approval require extensive pre-clinical and clinical testing and approval by the FDA prior to marketing.  Products subject to the Section 510(k) of the Federal Food Drug and Cosmetic

 

13



 

Act require FDA clearance prior to marketing.  To date, our products have required only compliance with Section 510(k).  Most of our products are subject to foreign regulatory approvals before they may be marketed abroad.  We place the “CE” mark on devices and products sold in Europe.  We have received ISO 13485 certification for our Utah and Texas facilities.  We have received EN ISO 13485 certification for our Galway, Ireland facility. We have also received ISO 9002 certification for our Merit Sensor Systems, Inc. facility in Santa Clara, California.

 

EMPLOYEES

 

As of December 31, 2005, we employed 1,519 people, including 1,146 in manufacturing, 152 in sales and marketing, 133 in engineering, research and development, and 88 in administration.

 

Many of our present employees are highly skilled.  Our failure or success will depend, in part, upon our ability to retain such employees.  We believe that an adequate supply of skilled employees is available.   We have from time to time experienced rapid turnover among our entry-level assembly workers, as well as occasional shortages of such workers, resulting in increased labor costs and administrative expenses related to hiring and training of replacement and new entry-level employees.  All of our employees are bound by confidentiality policies.   None of our employees is represented by a union or other collective bargaining group.  We believe that our relations with our employees are good.

 

AVAILABLE INFORMATION

 

We file annual, quarterly and current reports and other information with the SEC. These materials can be inspected and copied at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, D.C. 20549. Copies of these materials may also be obtained by mail at prescribed rates from the SEC’s Public Reference Room at the above address. Information about the Public Reference Room can be obtained by calling the SEC at 1-800-SEC-0330. The SEC also maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The address of the SEC’s Internet site is www.sec.gov.

 

We make available, free of charge, on our Internet website, located at www.merit.com, our most recent Annual Report on Form 10-K, our most recent Quarterly Report on Form 10-Q, any current reports on Form 8-K filed since our most recent Annual Report on Form 10-K, and any amendments to such reports as soon as reasonably practicable following the electronic filing of such report with the SEC.  In addition, we provide electronic or paper copies of our filings free of charge upon request.

 

FINANCIAL INFORMATION ABOUT FOREIGN AND DOMESTIC OPERATIONS AND EXPORT SALES

 

For financial information relating to our foreign and domestic sales, transfers between geographic areas, net income and identifiable assets, see Note 11 to our consolidated financial statements set forth in Item 8 of this report.

 

Item 1A. Risk Factors.

 

Our business, operations and financial condition are subject to certain risks and uncertainties.  Should one or more of these risks or uncertainties materialize, or should any underlying assumptions prove incorrect, our actual results will vary, and may vary materially from those anticipated, estimated, projected or expected.  Among the key factors that may have a direct bearing on our business, operations or financial condition are the factors identified below:

 

Our products may be subject to recall or product liability claims.

 

Our products are used in connection with invasive procedures and in other medical contexts in which it is important that those products function with precision and accuracy.  If our products do not function as designed, or are designed improperly, we may choose to or be forced by regulatory agencies to withdraw such products from the market.  In addition, if medical personnel or their patients suffer injury as a result of any failure our products to function as designed, or an inappropriate design, we could be subject to lawsuits seeking significant compensatory and punitive damages.  Any product recall or lawsuit seeking significant monetary damages may have a material adverse effect on our business, operations or financial condition.

 

14



 

Substantially all of our products are backed by a limited warranty for returns due to defects in quality and workmanship.  We maintain a reserve for these future returned products, but the actual costs of such returns may significantly exceed the reserve, which could have a material adverse effect on our financial condition.

 

Termination of relationships with our suppliers, or failure of such suppliers to perform, could disrupt our business.

 

We rely on raw materials, component parts, finished products, and services supplied by outside third parties in connection with our business.  For example, substantially all of our products are sterilized by a few entities.  In addition, some of our products are manufactured or assembled by third parties.  If a supplier of significant raw materials, component parts, finished goods or services were to terminate its relationship with us, or otherwise cease supplying raw materials, component parts, finished goods or services consistent with past practice, our ability to meet our obligations to our end customers may be disrupted.  A disruption with respect to numerous products, or with respect to a few significant products, could have a material adverse effect on our business, operations or financial condition.

 

We may be unable to protect our proprietary technology or may infringe on the proprietary technology of others.

 

Our ability to remain competitive is dependent, in part, upon our ability to prevent other companies from using our proprietary technology incorporated into our products.  We seek to protect our technology through a combination of patents, trademarks, and trade secrets, as well as licenses, proprietary know-how and confidentiality agreements.  We may be unable, however, to prevent others from using our proprietary information, or continue to use such information itself, for numerous reasons, including the following, which could have a material adverse effect on the Company’s business, operations or financial condition:

 

      Our issued patents may not be sufficiently broad to prevent others from copying our proprietary technologies;

 

      Our issued patents may be challenged by third parties and deemed to be overbroad or unenforceable;

 

      Our products may infringe on the patents of others, requiring us to alter or discontinue our manufacture or sale of such products;

 

      Costs associated with seeking enforcement of our patents against infringement, or defending four self against allegations of infringement, may be significant;

 

      Our pending patent applications may not be granted for various reasons, including overbreadth or conflict with an existing patent; and

 

      Other persons may independently develop, or have developed, similar or superior technologies.

 

We may be unable to successfully manage growth, particularly if accomplished through acquisitions.

 

Successful implementation of our business strategy will require that we effectively manage any associated growth.  To manage growth effectively, our management will need to continue to implement changes in certain aspects of our business, to improve our information systems and operations to respond to increased demand, to attract and retain qualified personnel and to develop, train and manage an increasing number of management-level and other employees.  Growth could place an increasing strain on our management, financial, product design, marketing, distribution and other resources, and we could experience operating difficulties. Any failure to manage growth effectively could have a material adverse effect on our results of operations and financial condition.

 

To the extent that we grow through acquisition, we will face the additional challenges of integrating our current operations, culture, informational management systems and other characteristics with that of the acquired entity.  We may incur significant expenses in connection with negotiating and consummating one or more transactions, and we may inherit certain liabilities in connection with the acquisition as a result of our failure or inability to conduct adequate due diligence or otherwise.  In addition, we may not realize competitive advantages, synergies or other benefits anticipated in connection with such acquisition(s).  If we do not adequately identify targets for, or manage issues related to its future acquisitions, such acquisitions may have a negative adverse effect on our business and financial results.

 

15



 

A significant adverse change in, or failure to comply with, governing regulations could adversely affect our business.

 

Substantially all of our products are “devices,” as defined in the Federal Food, Drug and Cosmetic Act, (“FDA”) and the manufacture, distribution, record keeping, labeling and advertisement of our products are subject to regulation by the FDA in the United States and its equivalent regulatory agencies in various foreign countries in which our products are manufactured, distributed, labeled, offered and sold.  Further, we are subject to continual review and periodic inspections at our current facilities with respect to the FDA’s Quality System Regulations and similar requirements of foreign countries.  In addition, we are subject to certain export control restrictions governed by the U.S. Department of the Treasury and may be governed by other regulatory agencies in various foreign countries in which products are exported.  Our business, operations or financial condition could be adversely affected if we are found to be out of compliance with governing regulations.  If such regulations are amended to become more restrictive and costly to comply with, the costs of compliance could adversely affect our business, operations or financial condition.

 

A significant portion of our revenues are derived from a few products and procedures.

 

A significant portion of our revenues are attributable to sales of our inflation devices.  During the year ended December 31, 2005, sales of our inflation devices (including inflation devices sold in custom kits and through OEM channels) accounted for approximately 33% our total revenues.  Any material decline in market demand for our inflation devices could have an adverse effect on our business, operations or financial condition.

 

In addition, the products that have accounted for a majority of our historical revenues are designed for use in connection with a few related medical procedures, including angioplasty, stent placement procedures, and spinal procedures. If subsequent developments in medical technology or drug therapy make such procedures obsolete, or alter the methodology of such procedures so as to eliminate the usefulness of our products, we may experience a material decrease in demand for our products and experience deteriorating financial performance.

 

We may be unable to compete in our markets, particularly if there is a significant change in relevant practices and technology.

 

The market for each of our products is highly competitive.  We face competition from many companies, many of which are larger, better established and have greater financial, technical and other resources and greater market presence than we do.  Such resources and market presence may enable our competition to more effectively market competing products or to market competing products at reduced prices in order to gain market share.

 

In addition, our ability to compete successfully is dependent, in part, upon our response to changes in technology and to our efforts to develop and market new products which achieve significant market acceptance. Competing companies with substantially greater resources than us are actively engaged in research and development of diagnostic and interventional methods, treatments and procedures that could limit the market for our products and eventually make certain products obsolete.  A reduction in the demand for a significant number of our products, or a few key products, could have a material adverse effect on our business, operations or financial condition.

 

The market price of our common stock has been, and may continue to be, volatile.

 

The market price of our common stock has been, and may continue to be, highly volatile for various reasons, including the following, which could have a material adverse effect on the Company’s business, operations or financial condition:

 

      Our announcement of new products or technical innovations, or similar announcements by our competitors;

 

      Development of new procedures that use, or do not use, our technology;

 

      Quarter-to-quarter variances in our financial results;

 

      Claims involving potential infringement of patents and other intellectual property rights;

 

16



 

      Analysts’ and other projections or recommendations regarding our common stock or medical technology stocks generally;

 

      Any restatement of our financial statements or any investigation of us by the SEC or another regulatory authority; and

 

      A general decline, or rise, of stock prices in the capital markets generally.

 

Fluctuations in Euro and GBP exchange rates may negatively impact our financial results.

 

Fluctuations in the rate of exchange between the Euro and GBP relative to value of the U.S. Dollar could have a negative impact on our margins and financial results.  For example, during 2005, the exchange rate between the Euro and the U.S. Dollar resulted in an increase in our gross revenues of approximately $263,000 and 0.09% in gross profit.

 

For the year ended December 31, 2005, approximately $20.0 million, or 12.0%, of our sales were denominated in Euros and GBP.  If the rate of exchange between the Euro and the GBP declines, against the U.S. Dollar, we may not be able to increase the prices we charge our European customers for products whose prices are denominated in Euros and GBP.  Furthermore, we may be unable or elect not to enter into hedging transactions which could mitigate the effect of declining exchange rates.  As a result, as the rate of exchange between Euros and GBP declines, against the U.S. Dollars, our financial results may be negatively impacted.

 

We are dependent upon key personnel.

 

Our success is dependent on key management personnel, including Fred P. Lampropoulos, our Chairman of the Board, President and Chief Executive Officer.  Mr. Lampropoulos is not subject to any agreement prohibiting his departure, and the Company does not maintain key man life insurance on his life. The loss of Mr. Lampropoulos, or of certain other key management personnel, could materially adversely affect our business and operations.  Our success also depends, among other factors, on the successful recruitment and retention of key operations, manufacturing, sales and other personnel.

 

We are subject to work stoppage, transportation and related risks.

 

We manufacture products at various locations in the United States and in Ireland and sell our products worldwide.  We depend on third-party transportation companies to deliver supplies necessary to manufacture Merit products from vendors to our various facilities and to move our products to customers, operating divisions and other subsidiaries located worldwide. Our manufacturing operations, and the operations of the transportation companies on which we depend, may be adversely affected by natural disasters or significant human events, such as a war, terrorist attack, riot, strike, slowdown or similar event.  Any disruption in our manufacturing or transportation could materially adversely affect our ability to meet customer demands or our operations.

 

Limits on reimbursement imposed by governmental and other programs may adversely affect our business.

 

The cost of a significant portion of medical care is funded by governmental, social security or other insurance programs.  Limits on reimbursement imposed by such programs may adversely affect the ability of hospitals and others to purchase our products.  In addition, limitations on reimbursement for procedures which utilize our products could adversely affect sales.

 

Item 2.    Properties.

 

The Company owns approximately 23 acres of real property situated in the City of South Jordan, Utah, surrounding an additional ten acres of leased real property on which is located the Company’s 175,000 square foot principal office and manufacturing facility.  The Company sold the ten-acre site to an unrelated developer in order to facilitate construction of such facility and entered into a 25-year lease agreement (beginning in 1995) to finance the new facility.  Monthly lease payments attributable to the ten-acre parcel are approximately $138,000.  The Company also holds an option to purchase the facility, exercisable at market value after 25 years.  During 2004, the Company acquired an additional four acres of property south of and adjacent to its current property in South Jordan, Utah.  During 2005 the Company acquired an additional seven acres of property just west of its current facility in South Jordan, Utah.  The

 

17



 

acquisition of these additional properties would potentially enable the Company to expand its operations in the future as property surrounding the Company is limited due to increased development over the past few years.  At the end of 2004, the Company completed a 47,000 square foot facility in South Jordan, Utah.  This facility is used primarily for research, development and pilot production clean rooms.  The Company also intends to use this ancillary facility to relocate its production of sensors from Santa Clara, California.  The Company completed a 140,000 square foot facility located in South Jordan, Utah in September of 2005.  This facility is used for injection and insert molding production, an automated finished goods warehouse, and management information system employees. The completion of the new facilities in South Jordan, Utah are designed to increase Merit’s clean room production capacity and administrative office space to meet current and projected demand the Company anticipates it will experience over the next several years.

 

The Company owns a building of approximately 65,000 square feet with approximately three acres of land, in Galway, County Galway, Republic of Ireland, which serves as its principal office and manufacturing facility for the Company’s European operations.  The facility houses a research and development team, which developed Merit’s diagnostic guide wire, and is working to develop other new products.  The Company also manufactures other products at the Galway facility, including custom kits, BASIX® inflation devices, and hemostasis valve products.  During 2004, the Company completed a 40,000-square-foot expansion of its Galway facility.  This expansion is designed to provide additional production capacity and office space to meet the Company’s current and anticipated needs.  The Company’s Galway property has been improved and equipped on terms favorable to the Company in connection with economic development incentives and grants provided by the Irish Government.

 

The Company leases a manufacturing facility of approximately 69,000 square feet comprised of nine units, located in Murray, Utah.  The Murray facility is used for production of several of the Company’s products.  The leases related to three of the units at the Murray facility expired in 2004, and leases related to six of these units will expire in 2007.  The aggregate monthly lease payments on these Murray facilities are approximately $36,000 and will expire in 2007.

 

The Company also leases 8,500 square feet of manufacturing and office space located in Santa Clara, California for the production of sensors.  This lease runs through August 2006 at a monthly cost of approximately $14,000.  The Company does not currently plan to renew its Santa Clara, California lease as it currently intends to relocate its sensor operations to a new facility built in South Jordan, Utah during 2004.  The Company currently anticipates that this move will begin during the second half of 2006 and be completed in 2007.   The Company intends to upgrade its wafer fabrication production to improve capacity and quality and reduce costs at its South Jordan facility prior to closing its Santa Clara, California operation.

 

The Company owns approximately 19 acres of land and a 75,000-square-foot building in Angleton, Texas.  The facility is used for the production of catheter related products.

 

The Company owns approximately 12 acres of land and a 100,000-square-foot building in Chester, Virginia.  The facility is used for production of custom procedure trays used in the medical industry.

 

The Company leases a manufacturing facility of approximately 5,000 square feet located in Venlo, The Netherlands.    The facility is used for the coating of wires and tubing for medical devices.  The lease will expire in June of 2007. The Company plans to relocate this operation to another facility with approximately 10,000 square feet after its current lease expires.  The current monthly lease payment is approximately $8,000.

 

The Company believes that its existing and proposed facilities will generally be adequate for its present and future anticipated level of operations.

 

Item 3.     Legal Proceedings.

 

In the course of conducting its business operations, the Company is, from time to time, involved in litigation and other disputes.  Management does not currently anticipate that any pending litigation or dispute against the Company will have a materially adverse effect on the Company’s operations.

 

18



 

Item 4.     Submission of Matters to a Vote of Security Holders.

 

No matters were submitted to a vote of security holders during the fourth quarter of the year ended December 31, 2005.

 

PART II

 

Item 5.    Market for Registrant’s Common Stock and Related Shareholder Matters.

 

MARKET PRICE FOR THE COMMON STOCK

 

Merit’s common stock (the “Common Stock”) is traded on the NASDAQ National Market System under the symbol “MMSI.”  The following table sets forth high and low sale prices for the Common Stock for the periods indicated.

 

March 31, 2004

 

$

25.40

 

$

18.05

 

June 30, 2004

 

$

22.39

 

$

13.25

 

September 30, 2004

 

$

17.69

 

$

14.09

 

December 31, 2004

 

$

15.64

 

$

9.61

 

 

 

 

 

 

 

March 31, 2005

 

$

15.05

 

$

11.46

 

June 30, 2005

 

$

15.86

 

$

11.67

 

September 30, 2005

 

$

18.32

 

$

15.14

 

December 31, 2005

 

$

17.70

 

$

11.60

 

 

OUTSTANDING SHARES AND NUMBER OF SHAREHOLDERS

 

As of March 2, 2006 number of shares of Common Stock outstanding was 27,207,221, held by approximately 200 shareholders of record, not including shareholders whose shares are held in securities position listings.

 

DIVIDENDS

 

The Company has never declared or paid cash dividends on the Common Stock.  The Company presently intends to retain any future earnings for use in its business and, therefore, does not anticipate paying any dividends on the Common Stock in the foreseeable future.   In addition, the Company’s revolving line of credit contains covenants prohibiting the declaration and distribution of a cash dividend at any time prior to the termination of such line of credit.

 

19



 

SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS

 

The following table contains information regarding the Company’s equity compensation plans as of December 31, 2005 (in thousands):

 

Plan category

 

Number of securities
to be issued upon
exercise of
outstanding options,
warrants and rights
(a)

 

Weighted-average
exercise price of
outstanding options,
warrants and rights
(b)

 

Number of securities
remaining available for
future issuance under
equity compensation plans
(excluding securities
reflected in column (a))
(c)

 

Equity compensation Plans approved by security holders

 

4,288

(1),(3)

$

10.67

 

435

(2),(3)

Equity compensation Plans not approved by security holders

 

100

(4)

$

10.13

 

 

 

Total

 

4,388

 

 

 

435

 

 


(1) Consists of 4,288,022 shares subject to the options granted under the Company’s Stock Incentive Plan.

(2) Consists of 434,855 shares available to be issued under the Company’s Employee Stock Purchase Plans and 500 shares available to be issued under the Company’s Stock Incentive Plan.

(3) See Note 10 to the Company’s consolidated financial statements set forth in Item 8 of this report for additional information regarding these plans.

(4) Consist of warrants issued in the acquisition of MedSource in 2004 – see Note 2 to the Company’s consolidated financial statements set forth in Item 8 of this report for additional information regarding this acquisition.

 

20



 

Item 6.     Selected Financial Data (in thousands except share data).

                 

 

 

Years Ended December 31,

 

 

 

2005

 

2004

 

2003

 

2002

 

2001

 

OPERATING DATA:

 

 

 

 

 

 

 

 

 

 

 

Net Sales

 

$

166,585

 

$

151,398

 

$

135,953

 

$

116,227

 

$

104,036

 

Cost of Sales

 

97,493

 

83,908

 

75,230

 

67,712

 

65,938

 

Gross Profit

 

69,092

 

67,490

 

60,723

 

48,515

 

38,098

 

 

 

 

 

 

 

 

 

 

 

 

 

Operating Expenses:

 

 

 

 

 

 

 

 

 

 

 

Selling, general and administrative

 

38,579

 

35,071

 

30,468

 

27,732

 

24,040

 

Research and development

 

6,992

 

5,079

 

4,626

 

4,008

 

4,118

 

 

 

 

 

 

 

 

 

 

 

 

 

Total operating expenses

 

45,571

 

40,150

 

35,094

 

31,740

 

28,158

 

 

 

 

 

 

 

 

 

 

 

 

 

Other Operating Income

 

 

 

 

 

 

 

 

 

 

 

Gain on sale of land

 

 

 

 

 

508

 

 

 

786

 

 

 

 

 

 

 

 

 

 

 

 

 

Income From Operations

 

23,521

 

27,340

 

26,137

 

16,775

 

10,726

 

 

 

 

 

 

 

 

 

 

 

 

 

Other Income(Expense):

 

 

 

 

 

 

 

 

 

 

 

Litigation settlement

 

 

 

100

 

475

 

 

 

 

 

Interest income

 

491

 

556

 

386

 

97

 

40

 

Interest expense

 

(18

)

(6

)

(10

)

(94

)

(978

)

Miscellaneous income (expense)

 

(94

)

16

 

34

 

(16

)

 

 

Other income—net

 

379

 

666

 

885

 

(13

)

(938

)

 

 

 

 

 

 

 

 

 

 

 

 

Income before income taxes

 

23,900

 

28,006

 

27,022

 

16,762

 

9,788

 

 

 

 

 

 

 

 

 

 

 

 

 

Income Tax Expense

 

8,122

 

10,074

 

9,727

 

5,452

 

3,052

 

 

 

 

 

 

 

 

 

 

 

 

 

Net Income

 

$

15,778

 

$

17,932

 

$

17,295

 

$

11,310

 

$

6,736

 

 

 

 

 

 

 

 

 

 

 

 

 

Earnings Per Common Share:

 

 

 

 

 

 

 

 

 

 

 

Diluted

 

$

0.57

 

$

0.65

 

$

0.64

 

$

0.43

 

$

0.28

 

 

 

 

 

 

 

 

 

 

 

 

 

Average Common Shares:

 

 

 

 

 

 

 

 

 

 

 

Diluted

 

27,847

 

27,691

 

27,034

 

26,238

 

23,876

 

 

 

 

 

 

 

 

 

 

 

 

 

BALANCE SHEET DATA:

 

 

 

 

 

 

 

 

 

 

 

Working capital

 

$

42,293

 

$

54,944

 

$

56,931

 

$

34,582

 

$

26,911

 

Total assets

 

161,716

 

139,877

 

107,301

 

78,305

 

66,659

 

Long-term debt

 

2

 

5

 

0

 

17

 

5,727

 

Stockholders’ equity

 

$

132,484

 

$

111,052

 

$

88,244

 

$

63,399

 

$

47,658

 

 

 

 

 

 

 

 

 

 

 

 

 

 

During the quarter ended December 31, 2005 the Company adopted SFAS No. 151, Inventory Costs and recorded additional expenses to cost of sales of $415,000, research and development expense of $83,000 and selling, general and administrative expense of $37,000.

 

During the year ended December 31, 2004 the Company accrued severance costs totaling approximately $663,000 related to the termination of certain employees.

 

21



 

Item 7.     Management’s Discussion and Analysis of Financial Condition and Results of Operations.

 

OVERVIEW

 

During 2005, we made significant investments in new production facilities, expanded our U.S. direct sales force and increased research and development efforts.   In 2005, we completed the construction of our new molding, technology, and logistic facility (MTL) in South Jordan, Utah, and purchased a new facility in Chester, Virginia, for the Medsource procedure tray business that we acquired during the fourth quarter of 2004. These facilities, along with facilities completed in Galway, Ireland and South Jordan, Utah during 2004, were developed to meet production demands for anticipated future sales growth.   Also, during 2005 we added additional research and development staff and created a new pilot production clean room to support new product launches.  During 2005, we also released several new products, including the Prelude™ sheath introducer, Viceroy inflation device, Backstop® Plus and Minstop™ Plus safety devices.   We plan to release three new products in the first half of 2006, the Revolution™ securement device, the Impress™ radiology catheter and the Honor™ hemostasis valve.  In an effort to promote future sales growth and improve market penetration, we hired 17 new sales people for our U.S. domestic direct sales force during 2005. We believe despite the temporary effects of these investments on earnings, they were needed to position us for potential future sales growth and earnings.

 

For the year ended December 31, 2005, we reported net sales of $166.6 million, up $15.2 million or 10% over the comparable period in 2004.   Net sales growth in 2005 was primarily driven by increased sales of our stand-alone products and our new procedure tray business.

 

Gross margins as a percentage of sales were down to 41.5% for the year ended December 31, 2005, compared to 44.6% for year ended December 31, 2004.  This decline resulted primarily from new facilities and equipment, increased cost of direct labor, higher overhead expenses and negative margins in the new procedure tray business acquired.  Sales of procedure trays contributed 2.4% to the Company’s total sales for 2005.

 

Net income decreased for the year ended December 31, 2005 to $15.8 million, compared to $17.9 million for the prior year period.  When compared to the prior year period, net income for the year ended December 31, 2005 was positively affected by increased sales volumes, and negatively affected by lower gross margins, higher research and development spending, and increased selling, general and administrative expenses.

 

RESULTS OF OPERATIONS

 

The following table sets forth certain operational data as a percentage of sales for the periods indicated:

 

 

 

2005

 

2004

 

2003

 

Sales

 

100.0%

 

100.0%

 

100.0%

 

Gross profit

 

41.5

 

44.6

 

44.7

 

Selling, general and administrative expenses

 

23.2

 

23.2

 

22.4

 

Research and development expenses

 

4.2

 

3.4

 

3.4

 

Income from operations

 

14.1

 

18.1

 

19.2

 

Income before income tax expense

 

14.3

 

18.5

 

19.9

 

Net income

 

9.5

 

11.8

 

12.7

 

 

Our net sales increased by $15.2 million, or 10%, in 2005, compared to an increase of $15.4 million, or 11.4%, in 2004, and an increase of 19.7 million, or 17%, in 2003.  We report sales in five product categories.  Listed below are the sales relating to these product categories for the years ended December 31, 2005, 2004 and 2003:

 

22



 

 

 

Twelve Months Ended
December 31,

 

 

 

% Change

 

2005

 

% Change

 

2004

 

% Change

 

2003

 

2002

 

Inflation devices

 

5%

 

$

52,319

 

11%

 

$

49,672

 

17%

 

$

44,583

 

$

38,232

 

Custom kits

 

6%

 

44,713

 

8%

 

42,187

 

18%

 

39,044

 

32,958

 

Stand-alone devices

 

8%

 

46,900

 

8%

 

43,226

 

19%

 

39,919

 

33,673

 

Catheters

 

17%

 

18,626

 

29%

 

15,967

 

9%

 

12,407

 

11,364

 

Procedure trays

 

 

 

4,027

 

 

 

346

 

 

 

 

 

 

Total

 

10%

 

$

166,585

 

11%

 

$

151,398

 

17%

 

$

135,953

 

$

116,227

 

 

Our revenues increased notwithstanding the fact that the markets for many of our products are experiencing slight pricing declines as our customers try to reduce costs.  Substantially all of the increase in our revenues was attributable to increased unit sales, except for a slight increase in the exchange rate between the Euro and the U.S. Dollar which increased sales by .09% in 2005 compared to 2004, 1.2% in 2004 compared to 2003, 1.8% in 2003 compared to 2002.  Unit growth for 2005, 2004, and 2003 resulted primarily from a procedural growth rate of approximately 6-8%. In addition, unit growth in 2005, 2004 and 2003 was attributable, in part, to our introduction of new products which accounted for approximately 4%, 4% and 5%, respectively, for total sales for such periods, with the remainder of unit growth coming from market share gains.  International sales in 2005 were approximately $45.3 million, or 27% of total sales; international sales in 2004 were approximately $37.5 million, or 25% of total sales; and international sales in 2003 were approximately $34.3 million, or 25% of total sales.  These increases were primarily a result of greater acceptance of our products in international markets, ongoing growth in our European direct sales, and increased sales related to improvement in the exchange rate between the Euro and the U.S. Dollar, as discussed above.  Our total direct sales in France, Germany, the U.K., Belgium, The Netherlands and Ireland were $20.0 million and $18.9 million and $15.6 million in 2005, 2004, and 2003, respectively.

 

Our gross profit as a percentage of sales was 41.5%, 44.6% and 44.7%, in 2005, 2004, and 2003, respectively.  The decline in gross margins in 2005 resulted primarily from new facilities and equipment, increased cost of direct labor, higher overhead expenses (i.e. utilities, maintenance, cleaning and taxes) and new product launches.  The decline in gross margins for 2005 was also affected by negative margins in the new procedure tray business we acquired from MedSource during the fourth quarter of 2004.  The effect was a reduction of gross margins by 1.4% for 2005.  Sales of procedure trays contributed 2.4% to the Company’s total sales for 2005.   The slight decrease in gross margin percentage in 2004, compared to 2003, was the result of a slight increase in the standard costs per unit as the result of increased manufacturing costs.  The increase in the gross margin percentage for 2003 over 2002 was primarily effected by an increase in efficiency and productivity gains achieved primarily our operations groups.  These productivity gains have been achieved primarily by enhanced employee productivity, which we believe was encouraged by our bonus program, streamlined production layouts and investments in manufacturing equipment.  With these improved efficiencies, our cost per unit for many of our products has decreased as unit sales have grown, notwithstanding slight increases in fixed overhead costs.  Gross profit was also favorable for 2003 over 2002 by an increase in the exchange rate of the Euro against the U.S. Dollar, resulting in an increase in gross profit of 0.3 and 0.4, respectively.  During 2003, we reduced the material costs from some of its principal vendors.  We are operating in a gradually declining price market.  During 2006, we expect gross margins to decline as a result of higher overhead expenses attributable to absorbing the new buildings and associated overhead costs; growth of lower-margin pack sales of MedSource; and bringing on several new products until sales volumes increase to cover overhead costs. We believe, however, that if we are successful in increasing production volumes according to current sales plans, the increased production will offset some of the effect of the lower margins.

 

Our selling, general and administrative expenses increased $3.5 million, or 10% in 2005 over 2004; $4.6 million, or 15.1% in 2004 over 2003; $2.7 million, or 9.9% in 2003 over 2002.  The increase in selling, general and administrative expenses in 2005 was due primarily to costs associated with severance for employees ($493,000), the buy-out of a distribution agreement ($200,000), the hiring of 17 additional sales people, and the sample expense related to new product introductions. The increase in selling, general and administrative costs for 2004, compared to 2003, was primarily the result of approximately $674,000 in costs associated with our efforts to comply with the requirements of Section 404 of the Sarbanes-Oxley Act of 2002 and severance costs of approximately $663,000 related to the termination of certain employees.  The additional expenditures for 2003 over 2002 were related to increases in commissions paid commensurate with sales growth, costs of expanding our direct sales force in the United States and Europe, and an

 

23



 

increased exchange rate of the Euro against the U.S. Dollar compared to the same period in 2002, resulting in an increase in selling expenses for our direct sales force in Europe.

 

Our research and development (R&D) expenses for 2005 increased 37.7% to $7.0 million, compared to $5.1 million in 2004; increased 9.8% to $5.1 million, compared to $4.6 million in 2003; increased 15.4% to $4.6 million in 2003, compared to $4.0 million in 2002.  The increase in R&D in 2005, 2004, and 2003 was related primarily to R&D head count additions and indirect costs, to support an increase in the number of new products we launched.  Our research and development costs as a percentage of sales were 4.2% for 2005 and 3.4% for 2004 and 2003.  We believe that the development of 10-12 projects at any given time is an appropriate level of R&D for our current capabilities, and are likely to provide six to eight new products a year through R&D, regulatory, manufacturing, marketing, and sales introduction.

 

Our effective tax rates for 2005, 2004, and 2003 were 34%, 36%, and 36%, respectively.  The decrease in the effective tax rate for 2005 over 2004 was the result of the reimbursement by the U.S. parent of costs incurred by its Irish operation for the development of two new products which are taxed at a lower income tax rate than the U.S. The increase in the effective tax rate for 2003 over 2002 was mostly due to lower taxable income in 2003 for our Irish operations, which are taxed at a lower rate than our U.S. operations.  The change in taxable income for Irish operations from 2003 to 2002 was the result of increased costs associated with the development of a new product.

 

Our other operating income for 2003 was the result of a gain of $507,928 on sale of land adjacent to our Company’s South Jordan, Utah facility.

 

Our other income for 2005, 2004, and 2003 was approximately $379,000, $666,000, and $885,000, respectively.  The decrease in other income for 2005 over 2004 was affected by a net decrease in a litigation settlement of $100,000, an increase in foreign currency transaction loss of approximately $67,000 and a decrease in interest income of approximately $65,000. The decrease in other income for 2004 over 2003 was affected by a net decrease in a litigation settlement of approximately $375,000, offset by an increase in 2004 of interest income of approximately $170,000.  The increase in other income for 2003 over 2002 related mostly to the settlement of a legal dispute of $475,000, an increase in interest income of approximately $289,000, and a decrease in interest expense of approximately $84,00 compared to the same period in 2002.

 

Our net income for 2005 was $15.8 million, compared to $17.9 million for 2004. Net income for 2004 was $17.9 million, compared to $17.3 million for 2003.  Net income for 2003 was $17.3 million, compared to $11.3 million for 2002.  Net income for 2005 and 2004 was negatively affected by lower gross margins, higher research and development spending, selling, general and administrative expenses, and positively affected by increased sales volumes.   Net income for 2003 and 2002 was favorably affected by higher sales, gross profits and an increase in other income.

 

Under the recently issued Financial Accounting Standard Board Statement (FASB) No. 123R, Share-based Payment, we will be required to apply the expense recognition provisions of this pronouncement to equity-based incentives such as stock options.  In anticipation of this pronouncement, during 2005 and 2004 we made grants to management and employees for a total of 774,976 and 807,296 shares of our common stock, respectively, which vested immediately upon grant, rather than over five years as has been our historical practice.  Additionally, subsequent to December 31, 2004, we accelerated the vesting on 427,448 options with an exercise price of $21.67, which was in excess of the current market price.  The immediate vesting of options and the acceleration of options which have exercise prices that are above the current market value of our common stock are anticipated to reduce our compensation expense by approximately $2.8 million and $3.2 million, respectively, in future periods under the provisions of FAS No. 123R, which we believe is in the best interest of Merit and its shareholders.

 

Effective January 1, 2002, we adopted Statement of Financial Accounting Standards (SFAS) No. 142, Goodwill and Other Intangible Assets.  Under SFAS No. 142, we no longer amortize goodwill from business acquisitions, but review annually the impairment of goodwill, or more frequently if impairment indicators arise.  We completed its initial testing of goodwill as of January 1, 2002 and determined that there was no impairment.  We have elected to perform our annual testing of goodwill impairment as of July 1 of the applicable fiscal year.  As of July 1, 2005, we updated our testing of goodwill for impairment and determined that there was no impairment.  The unamortized amount of goodwill at December 31, 2005, was approximately $6.5 million.

 

24



 

LIQUIDITY AND CAPITAL RESOURCES

 

Capital Commitments

 

The following table summarizes our capital commitments and contractual obligations as of December 31, 2005, including long-term debt, operating lease payments, and office lease payments, as well as the future periods in which such payments are currently anticipated to become due:

 

 

 

Payment due by period (in thousands)

 

Contractual Obligations

 

Total

 

Less than 1
Year

 

1-3 Years

 

4-5 Years

 

After 5
Years

 

Long-term debt

 

4

 

2

 

2

 

 

 

 

 

Operating leases

 

25,295

 

2,773

 

3,968

 

3,465

 

15,089

 

Royalty obligations

 

1,350

 

450

 

900

 

 

 

 

 

Total contractual cash obligations

 

26,649

 

3,225

 

4,870

 

3,465

 

15,089

 

 

Additional information regarding our capital commitments and contractual obligations, including royalty payments, is contained in Notes 7, 8, and 12 of the Notes to our consolidated financial statements, set forth in Item 8.

 

Our working capital for 2005, 2004, and 2003 was $42.3million, $54.9 million, and $56.9 million, respectively.  The decrease in working capital for 2005 and 2004 over the comparable periods of 2004 and 2003, respectively, was primarily the result of cash being used to fund the construction of our new facilities in South Jordan, Utah, and Galway, Ireland; the purchase of and remodel of our facility in Chester, Virginia; and the acquisitions of MCTec, MedSource and Sub-Q.  The increases in working capital for 2003 over 2002 was primarily due to an increase in our cash balance of $20.5 million in 2003 and $9.3 million in 2002.  As of December 31, 2005, we had a current ratio of 3.1 to 1.  We had $0 outstanding under our line of credit at December 31, 2005.  We assumed some capital leases with the purchase of the MedSource assets, with an outstanding balance of approximately $4,000 at December 31, 2005.  We generated cash from operations for 2005, 2004, and 2003 in the amount of $11.2 million, $26.5 million, and $25.2 million respectively. We maintain a long-term revolving credit facility (the “Facility”) with a bank, which currently enables us to borrow funds at variable interest rates. The Facility was voluntarily reduced to $500,000 in August 2002. The Facility expires on June 30, 2006.  We are currently in discussions with a different bank for a line of credit for $30 million, subject to a favorable credit review.

 

Historically, we have incurred significant expenses in connection with product development and introduction of new products.  Substantial capital has also been required to finance the increase in our receivables and inventories associated with our increased sales.  During 2005, we paid approximately $14.6 million for payments to complete the construction of our new MTL building and cafeteria expansion in South Jordan, Utah.  In addition, during 2005, we spent, approximately $4.7 million to purchase a 102,000 square foot facility and add a clean room in Chester, Virginia, and $1.5 million to purchase seven acres of land just west of our current South Jordan, Utah facilities.   Also during 2005, significant investments were made for new equipment including approximately $1.8 million in molding equipment, approximately $3.4 million for an automated warehouse shipping system, and approximately $2 million for automated production equipment.    Our principal source of funding for these and other expenses has been cash generated from operations, sales of equity, cash from loans on equipment, and bank lines of credit.  We currently believe that our present sources of liquidity and capital are adequate for current operations and for the foreseeable future.

 

Critical Accounting Policies and Estimates

 

The SEC has requested that all registrants address their most critical accounting policies.  The SEC has indicated that a “critical accounting policy” is one which is both important to the representation of the registrant’s financial condition and results and requires management’s most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain.  We base our estimates on past experience and on various other assumptions our management believes to be reasonable under the circumstances, the results of which form the basis for making judgments about carrying values of assets and liabilities that are not readily apparent from other sources.   Actual results will differ, and may differ materially from these estimates under different assumptions or conditions. Additionally, changes in accounting estimates could occur in the future from period to period.  Our management has discussed the development, and selection of our most critical financial estimates with the audit committee of our Board of Directors.  The following paragraphs identify our most critical accounting policies:

 

25



 

Inventory Obsolescence Reserve:  Our management reviews on a regular basis inventory quantities on hand for unmarketable and/or slow moving products that may expire prior to being sold.  This review of inventory quantities for unmarketable and/or slow moving products is based on estimates of forecasted product demand prior to expiration lives.  If market conditions become less favorable than those projected by our management, additional inventory write-downs may be required.  We believe that the amount included in our obsolescence reserve has been an historically accurate estimate of the unmarketable and/or slow moving products that may expire prior to being sold.  Our obsolescence reserve was approximately $1.7 million as of December 31, 2005.

 

Allowance for Doubtful Accounts:  A majority of our receivables are with hospitals, which over our history, have demonstrated favorable collection rates.  Therefore, we have experienced relatively minimal bad debts from hospital customers.  In limited circumstances we have written off minimal bad debts as the result of the termination of foreign distributors.  The most significant write-offs over our history have come from U.S. packers who bundle our products in surgical trays.

 

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments.  The allowance is based upon historical experience and a review of individual customer balances.   If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.  Our bad debt reserve was $758,663 at December 31, 2005, which is in line with historical collection experience.

 

Stock-Based Compensation:  We account for our stock compensation arrangements under the provisions of Accounting Principles Board Opinion No. 25, Accounting for Stock Issued to Employees, (“APB 25”).  Accordingly, no compensation cost has been recognized for our stock compensation arrangements.  If the compensation cost for our compensation plans had been determined consistent with Statement of Financial Accounting Standards (“SFAS”) No. 123, Accounting for Stock-Based Compensation, our net income and net income per common and common share equivalent would have changed to the pro forma amounts indicated below (in thousands except per share data) :

 

 

 

2005

 

2004

 

2003

 

 

 

 

 

 

 

 

 

Net income—as reported

 

$

15,778

 

$

17,932

 

$

17,295

 

Compensation cost under fair value-based accounting method—net of tax

 

5,201

 

4,373

 

2,957

 

 

 

 

 

 

 

 

 

Net income—pro forma

 

$

10,577

 

$

13,559

 

$

14,338

 

 

 

 

 

 

 

 

 

Net income per common share:

 

 

 

 

 

 

 

Basic:

 

 

 

 

 

 

 

As reported

 

$

0.59

 

$

0.68

 

$

0.68

 

Pro forma

 

0.39

 

0.52

 

0.56

 

 

 

 

 

 

 

 

 

Diluted:

 

 

 

 

 

 

 

As reported

 

0.57

 

0.65

 

0.64

 

Pro forma

 

0.38

 

0.49

 

0.53

 

 

In applying the Black-Scholes methodology to the option grants, we used the following assumptions:

 

 

 

Year Ended December 31,

 

 

 

2005

 

2004

 

2003

 

Risk-free interest rate

 

3.31% - 4.36%

 

2.96% - 3.68%

 

2.32% - 3.23%

 

Expected option life

 

2.5 years

 

2.5 years

 

5 years

 

Expected price volatility

 

43.23%-46.28%

 

47.54%

 

63.81%

 

 

For options with a vesting period, compensation expense is recognized on a ratable basis over the service period which corresponds to the vesting period. Compensation expense is recognized immediately for options that are fully vested on the date of grant.    On February 3, 2005, we accelerated the vesting of 427,448 options with an exercise price of $21.67, which was in excess of the current market price.  The acceleration of these options increased the pro-forma compensation cost for the twelve months ended December 31, 2005 by approximately $3.2 million, net of tax.

 

26



 

Item 7A.   Quantitative and Qualitative Disclosure About Market Risk.

 

Our principal market risk relates to changes in the value of the Euro and Great Britain Pound (“GBP”) relative to the value of the U.S. Dollar.  Our consolidated financial statements are denominated in, and our principal currency is, the U.S. Dollar.  A portion of our revenues ($20.0 million, representing approximately 12.0% of aggregate revenues), for the year ended December 31, 2005 was attributable to sales that were denominated in Euros and GBPs.  Certain of our expenses are also denominated in Euros and GBPs, which partially offsets risks associated with fluctuations of exchanges rates between the Euro and GBP on the one hand, and the U.S. Dollar on the other hand.  Because of our Euro and GBP-denominated revenues and expenses, in a year in which our Euro and GBP-denominated revenues exceed our Euro and GBP-based expenses, the value of such Euro and GBP-denominated net income increases if the value of the Euro and GBP increase relative to the value of the U.S. Dollar, and decreases if the value of the Euro and GBP decrease relative to the value of the U. S. Dollar.  During the year ended December 31, 2005, the exchange rate between the Euro and GBP against the U.S. Dollar resulted in an increase of our gross revenues of approximately $263,000 and 0.09% in gross profit.

 

At December 31, 2005, we had a net exposure representing the difference between Euro and GBP denominated receivables and Euro and GBP denominated payables of approximately $1.7 million and $295,000, respectively.  In order to partially offset such risks, at November 30, 2005, we entered into 30-day forward contract for Euro and GBP.  We generally enter into similar economic transactions at various times during the year to partially offset exchange rate risks we bear throughout the year.  We do not purchase or hold derivative financial instruments for speculative or trading purposes.  During the year ended December 31, 2005 and 2004 we experienced a net loss of approximately $67,000 and $8,000, respectively, on these transactions executed during 2005 and 2004 in an effort to limit our exposure to fluctuations in the Euro and GBP against the U.S. Dollar exchange rate.

 

Another market risk relates to variable rate debt.  As of December 31, 2005, we had no variable rate debt.  As long as we do not have variable rate debt, our interest expense would not be affected by changes in interest rates.

 

27



 

Item 8.  Financial Statements and Supplementary Data.

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

To the Board of Directors and Stockholders of Merit Medical Systems Inc.:

 

We have audited the accompanying consolidated balance sheets of Merit Medical Systems Inc., and subsidiaries (the “Company”) as of December 31, 2005 and 2004, and the related consolidated statements of income, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2005. Our audits also included the financial statement schedule listed in the Index at Item 15 These financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on the financial statements and financial statement schedule based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2005 and 2004, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2005, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the effectiveness of the Company’s internal control over financial reporting as of December 31, 2005, based on the criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 1, 2006 expressed an unqualified opinion on management’s assessment of the effectiveness of the Company’s internal control over financial reporting and an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

 

DELOITTE & TOUCHE LLP

Salt Lake City, Utah
March 1, 2006

 

28



 

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

 

CONSOLIDATED BALANCE SHEETS

DECEMBER 31, 2005 AND 2004

(In Thousands)

 

 

 

2005

 

2004

 

ASSETS

 

 

 

 

 

 

 

 

 

 

 

CURRENT ASSETS:

 

 

 

 

 

Cash and cash equivalents

 

$

4,645

 

$

33,037

 

Trade receivables—net of allowance for uncollectible accounts: 2005—$767; 2004—$729

 

25,433

 

19,724

 

Employee receivables

 

116

 

94

 

Other receivables

 

108

 

63

 

Inventories

 

32,080

 

23,096

 

Prepaid expenses and other assets

 

1,023

 

797

 

Deferred income tax assets

 

28

 

56

 

Income tax refunds receivable

 

977

 

 

 

 

 

 

 

 

 

Total current assets

 

64,410

 

76,867

 

 

 

 

 

 

 

PROPERTY AND EQUIPMENT:

 

 

 

 

 

Land and land improvements

 

6,232

 

4,664

 

Buildings

 

42,283

 

18,272

 

Manufacturing equipment

 

46,457

 

32,475

 

Furniture and fixtures

 

16,255

 

12,786

 

Leasehold improvements

 

6,658

 

4,085

 

Construction-in-progress

 

7,374

 

14,474

 

 

 

 

 

 

 

Total

 

125,259

 

86,756

 

Less accumulated depreciation

 

(39,641

)

(34,264

)

 

 

 

 

 

 

Property and equipment—net

 

85,618

 

52,492

 

 

 

 

 

 

 

OTHER ASSETS:

 

 

 

 

 

Intangibles net of accumulated

 

 

 

 

 

amortization: 2005—$1,483; 2004—$1,332

 

3,342

 

1,990

 

Goodwill

 

6,415

 

5,570

 

Other assets

 

2,363

 

1,822

 

Note receivable

 

 

 

1,000

 

Deposits

 

99

 

136

 

 

 

 

 

 

 

Total other assets

 

12,219

 

10,518

 

 

 

 

 

 

 

TOTAL ASSETS

 

$

162,247

 

$

139,877

 

 

 

 

 

 

 

See notes to consolidated financial statements.

 

 

 

(Continued)

 

 

29



 

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

 

CONSOLIDATED BALANCE SHEETS

DECEMBER 31, 2005 AND 2004

(In Thousands)

 

 

 

2005

 

2004

 

LIABILITIES AND STOCKHOLDERS’ EQUITY

 

 

 

 

 

 

 

 

 

 

 

CURRENT LIABILITIES:

 

 

 

 

 

Current portion of long-term debt

 

$

2

 

$

7

 

Trade payables

 

10,254

 

10,728

 

Accrued expenses

 

8,549

 

8,467

 

Advances from employees

 

316

 

221

 

Deferred income tax liabilities

 

1,141

 

227

 

Income taxes payable

 

455

 

2,273

 

 

 

 

 

 

 

Total current liabilities

 

20,717

 

21,923

 

 

 

 

 

 

 

DEFERRED INCOME TAX LIABILITIES

 

4,166

 

2,580

 

 

 

 

 

 

 

LONG-TERM DEBT

 

2

 

5

 

 

 

 

 

 

 

DEFERRED COMPENSATION PAYABLE

 

2,363

 

1,702

 

 

 

 

 

 

 

DEFERRED CREDITS

 

2,415

 

2,615

 

 

 

 

 

 

 

OTHER LONG-TERM OBLIGATION

 

100

 

 

 

 

 

 

 

 

 

Total liabilities

 

29,763

 

28,825

 

 

 

 

 

 

 

COMMITMENTS AND CONTINGENCIES (Notes 2, 7, 8, and 12)

 

 

 

 

 

 

 

 

 

 

 

STOCKHOLDERS’ EQUITY:

 

 

 

 

 

Preferred stock—5,000 shares authorized as of December 31, 2005 and 2004; no shares issued

 

 

 

 

 

Common stock—no par value; 50,000 shares authorized; 27,163 and 26,486 shares issued at December 31, 2005 and 2004, respectively

 

48,198

 

42,559

 

Retained earnings

 

84,668

 

68,891

 

Accumulated other comprehensive loss

 

(382

)

(398

)

 

 

 

 

 

 

Total stockholders’ equity

 

132,484

 

111,052

 

 

 

 

 

 

 

TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY

 

$

162,247

 

$

139,877

 

 

 

 

 

 

 

See notes to consolidated financial statements.

 

 

 

(Concluded)

 

 

30



 

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF OPERATIONS

YEARS ENDED DECEMBER 31, 2005, 2004 AND 2003

(In Thousands Except Per Share Data)

 

 

 

2005

 

2004

 

2003

 

 

 

 

 

 

 

 

 

NET SALES

 

$

166,585

 

$

151,398

 

$

135,953

 

 

 

 

 

 

 

 

 

COST OF SALES

 

97,493

 

83,908

 

75,230

 

 

 

 

 

 

 

 

 

GROSS PROFIT

 

69,092

 

67,490

 

60,723

 

 

 

 

 

 

 

 

 

OPERATING EXPENSES:

 

 

 

 

 

 

 

Selling, general and administrative

 

38,579

 

35,071

 

30,468

 

Research and development

 

6,992

 

5,079

 

4,626

 

 

 

 

 

 

 

 

 

Total operating expenses

 

45,571

 

40,150

 

35,094

 

 

 

 

 

 

 

 

 

OTHER OPERATING INCOME—

 

 

 

 

 

 

 

Gain on sale of land

 

 

 

 

 

508

 

 

 

 

 

 

 

 

 

INCOME FROM OPERATIONS

 

23,521

 

27,340

 

26,137

 

 

 

 

 

 

 

 

 

OTHER INCOME (EXPENSE):

 

 

 

 

 

 

 

Litigation settlement

 

 

 

100

 

475

 

Interest income

 

491

 

556

 

386

 

Interest expense

 

(18

)

(6

)

(10

)

Other income (expense)

 

(94

)

16

 

34

 

 

 

 

 

 

 

 

 

Other income—net

 

379

 

666

 

885

 

 

 

 

 

 

 

 

 

INCOME BEFORE INCOME TAXES

 

23,900

 

28,006

 

27,022

 

 

 

 

 

 

 

 

 

INCOME TAX EXPENSE

 

8,122

 

10,074

 

9,727

 

 

 

 

 

 

 

 

 

NET INCOME

 

$

15,778

 

$

17,932

 

$

17,295

 

 

 

 

 

 

 

 

 

EARNINGS PER COMMON SHARE:

 

 

 

 

 

 

 

Basic

 

$

0.59

 

$

0.68

 

$

0.68

 

Diluted

 

$

0.57

 

$

0.65

 

$

0.64

 

 

 

 

 

 

 

 

 

AVERAGE COMMON SHARES:

 

 

 

 

 

 

 

Basic

 

26,848,447

 

26,300,773

 

25,401,445

 

Diluted

 

27,847,122

 

27,690,668

 

27,033,964

 

 

See notes to consolidated financial statements.

 

31



 

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

YEARS ENDED DECEMBER 31, 2005, 2004 AND 2003

(In Thousands)

 

 

 

 

 

 

 

 

 

Accumulated

 

 

 

 

 

 

 

 

 

 

 

Other

 

 

 

 

 

 

 

Common Stock

 

Comprehensive

 

Retained

 

 

 

Total

 

Shares

 

Amount

 

Loss

 

Earnings

 

BALANCE—January 1, 2003

 

63,399

 

24,647

 

30,267

 

(531

)

33,663

 

Comprehensive income:

 

 

 

 

 

 

 

 

 

 

 

Net income

 

17,295

 

 

 

 

 

 

 

17,295

 

Foreign currency translation adjustment (net of deferred tax of $69)

 

114

 

 

 

 

 

114

 

 

 

Total comprehensive income

 

17,409

 

 

 

 

 

 

 

 

 

Tax benefit attributable to appreciation of common stock options exercised

 

4,741

 

 

 

4,741

 

 

 

 

 

Issuance of common stock under Employee Stock Purchase Plans

 

305

 

33

 

305

 

 

 

 

 

Options and warrants exercised

 

3,719

 

1,408

 

3,719

 

 

 

 

 

Shares surrendered in exchange for the payment of payroll tax liabilities

 

(781

)

(49

)

(781

)

 

 

 

 

Shares surrendered in exchange for the exercise of stock options

 

(548

)

(36

)

(548

)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BALANCE—January 1, 2004

 

88,244

 

26,003

 

37,703

 

(417

)

50,958

 

Comprehensive income:

 

 

 

 

 

 

 

 

 

 

 

Net income

 

17,932

 

 

 

 

 

 

 

17,932

 

Foreign currency translation adjustment (net of deferred tax of $11)

 

19

 

 

 

 

 

19

 

 

 

Total comprehensive income

 

17,951

 

 

 

 

 

 

 

 

 

Tax benefit attributable to appreciation of common stock options exercised

 

2,841

 

 

 

2,841

 

 

 

 

 

Stock issued in conjunction with acquisition (net of registration expenses of $22)

 

301

 

 

 

301

 

 

 

 

 

Issuance of common stock under Employee Stock Purchase Plans

 

584

 

40

 

584

 

 

 

 

 

Options and warrants exercised

 

1,855

 

480

 

1,855

 

 

 

 

 

Shares surrendered in exchange for the payment of payroll tax liabilities

 

(459

)

(22

)

(459

)

 

 

 

 

Shares surrendered in exchange for the exercise of stock options

 

(265

)

(15

)

(265

)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BALANCE—January 1, 2005

 

111,052

 

26,486

 

42,560

 

(398

)

68,890

 

Comprehensive income:

 

 

 

 

 

 

 

 

 

 

 

Net income

 

15,778

 

 

 

 

 

 

 

15,778

 

Foreign currency translation adjustment (net of deferred tax of $10)

 

16

 

 

 

 

 

16

 

 

 

Total comprehensive income

 

15,794

 

 

 

 

 

 

 

 

 

Tax benefit attributable to appreciation of common stock options exercised

 

2,632

 

 

 

2,632

 

 

 

 

 

Issuance of common stock under Employee Stock Purchase Plans

 

913

 

82

 

913

 

 

 

 

 

Options and warrants exercised

 

3,155

 

670

 

3,155

 

 

 

 

 

Shares surrendered in exchange for the payment of payroll tax liabilities

 

(691

)

(49

)

(691

)

 

 

 

 

Shares surrendered in exchange for the exercise of stock options

 

(371

)

(26

)

(371

)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BALANCE—December 31, 2005

 

$

132,484

 

27,163

 

$

48,198

 

$

(382

)

$

84,668

 

 

See notes to consolidated financial statements.

 

32



 

MERIT MEDICAL SYSTEMS, INC. AND SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF CASH FLOWS

YEARS ENDED DECEMBER 31, 2005, 2004 AND 2003

(In Thousands)

 

 

 

2005

 

2004

 

2003

 

 

 

 

 

 

 

 

 

CASH FLOWS FROM OPERATING ACTIVITIES:

 

 

 

 

 

 

 

Net income

 

$

15,778

 

$

17,932

 

$

17,295

 

Adjustments to reconcile net income to net cash provided by operating activities:

 

 

 

 

 

 

 

Depreciation and amortization

 

5,841

 

4,730

 

4,486

 

(Gains) losses on sales and/or abandonment of property and equipment

 

12

 

1

 

(517

)

Write-off of certain patents and trademarks

 

35

 

214

 

26

 

Amortization of deferred credits

 

(199

)

(238

)

(258

)

Deferred income taxes

 

2,574

 

(48

)

430

 

Tax benefit attributable to appreciation of common stock options exercised

 

2,632

 

2,841

 

4,741

 

Changes in operating assets and liabilities net of effects from acquisitions:

 

 

 

 

 

 

 

Trade receivables

 

(5,489

)

(1,792

)

(2,481

)

Employee and other receivables

 

(28

)

111

 

537

 

Inventories

 

(8,470

)

(1,634

)

(2,570

)

Prepaid expenses and other assets

 

(214

)

34

 

(156

)

Other receivables

 

(6

)

61

 

331

 

Other long-term assets

 

(93

)

 

 

 

 

Deposits

 

38

 

(105

)

1

 

Trade payables

 

1,852

 

1,477

 

1,579

 

Accrued expenses

 

(627

)

259

 

1,949

 

Advances from employees

 

107

 

62

 

(3

)

Income taxes payable

 

(2,749

)

2,560

 

(197

)