cmc10kfiled112409.htm
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934

FOR THE FISCAL YEAR ENDED SEPTEMBER 30, 2009
or
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF
THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from ________ to ________

COMMISSION FILE NUMBER 000-30205

CABOT MICROELECTRONICS CORPORATION
(Exact name of registrant as specified in its charter)
DELAWARE
36-4324765
(State of Incorporation)
(I.R.S. Employer Identification No.)

870 NORTH COMMONS DRIVE
60504
AURORA, ILLINOIS
(Zip Code)
(Address of principal executive offices)
 
Registrant's telephone number, including area code: (630) 375-6631

Securities registered pursuant to Section 12(b) of the Act:
Title of each class
 
Name of each exchange on which registered
Common Stock, $0.001 par value
 
The NASDAQ Stock Market LLC

Securities registered pursuant to Section 12(g) of the Act:  None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.       Yes [ X ]    No [  ]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes [  ]    No [ X ]

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes [ X ]    No [  ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes [  ]    No [  ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [ X ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See definition of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer
[ X ]
Accelerated filer
[  ]
Non-accelerated filer
[  ]
Smaller reporting company
[  ]

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).     Yes [  ]    No [ X ]

The aggregate market value of the registrant’s Common Stock held beneficially or of record by stockholders who are not affiliates of the registrant, based upon the closing price of the Common Stock on March 31, 2009, as reported by the NASDAQ Global Select Market, was approximately $552,778,600.  For the purposes hereof, "affiliates" include all executive officers and directors of the registrant.

As of October 31, 2009, the Company had 23,445,722 shares of Common Stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s definitive Proxy Statement for the Annual Meeting of Stockholders to be held on March 2, 2010, are incorporated by reference in Part III of this Form 10-K to the extent stated herein.

This Form 10-K includes statements that constitute “forward-looking statements” within the meaning of federal securities regulations.  For more detail regarding “forward-looking statements” see Item 7 of Part II of this Form 10-K.

 
1

 

 
CABOT MICROELECTRONICS CORPORATION
FORM 10-K
FOR THE FISCAL YEAR ENDED SEPTEMBER 30, 2009

PART I.
   
Page
       
 
Item 1.
3
 
Item 1A.
13
 
Item 1B.
17
 
Item 2.
18
 
Item 3.
19
 
Item 4.
19
   
20
       
       
PART II.
     
       
 
Item 5.
22
 
Item 6.
24
 
Item 7.
25
 
Item 7A.
38
 
Item 8.
40
 
Item 9.
76
 
Item 9A.
76
 
Item 9B.
77
       
       
PART III.
     
       
 
Item 10.
78
 
Item 11.
78
 
Item 12.
79
 
Item 13.
79
 
Item 14.
79
       
       
PART IV.
     
       
 
Item 15.
80
   
80
   
82


 
2

 
Index
 

 
PART I

ITEM 1.  BUSINESS

OUR COMPANY

 
Cabot Microelectronics Corporation ("Cabot Microelectronics'', "the Company'', "us'', "we'', or "our''), which was incorporated in the state of Delaware in 1999, is the leading supplier of high-performance polishing slurries used in the manufacture of advanced integrated circuit (IC) devices within the semiconductor industry, in a process called chemical mechanical planarization (CMP).  CMP is a polishing process used by IC device manufacturers to planarize or flatten many of the multiple layers of material that are deposited upon silicon wafers in the production of advanced ICs.  Our products play a critical role in the production of the most advanced IC devices, thereby enabling our customers to produce smaller, faster and more complex IC devices with fewer defects.

We currently operate predominantly in one industry segment – the development, manufacture and sale of CMP consumables.  We develop, produce and sell CMP slurries for polishing many of the conducting and insulating materials used in IC devices, and also for polishing certain components in hard disk drives, specifically rigid disk substrates and magnetic heads.  In addition, we develop, manufacture and sell CMP polishing pads, which are used in conjunction with slurries in the CMP process.  We are also pursuing a number of other demanding surface modification applications outside of the semiconductor and hard disk drive industries for which we believe our capabilities and knowledge may provide value in improved surface performance or productivity.

In February 2009, we acquired Epoch Material Co., Ltd. (Epoch), which previously was a consolidated subsidiary of Eternal Chemical Co., Ltd. (Eternal).  Epoch is a Taiwan-based company specializing in the development, manufacture and sale of copper CMP slurries and CMP cleaning solutions to the semiconductor industry, and color filter slurries to the liquid crystal display (LCD) industry.  We believe the acquisition of Epoch provides an excellent opportunity to strengthen and grow our core CMP consumables business, primarily in the area of copper CMP slurries, and enhances our ability to innovate, deliver and support high-performing, world-class products to our customers around the world.


CMP PROCESS WITHIN IC DEVICE MANUFACTURING

IC devices are components in a wide range of electronic systems for computing, communications, manufacturing and transportation.  Individual consumers most frequently encounter IC devices as microprocessors in their personal computers and as memory chips in computers, cell phones and digital cameras.  The multi-step manufacturing process for IC devices typically begins with a circular wafer of pure silicon, with the first manufacturing step referred to as a “wafer start”.  A large number of identical IC devices, or dies, are manufactured on each wafer at the same time.  The first steps in the manufacturing process build transistors and other electronic components on the silicon wafer.  These are isolated from each other using a layer of insulating material, most often silicon dioxide, to prevent electrical signals from bridging from one transistor to another.  These components are then wired together using conducting materials such as aluminum or copper in a particular sequence to produce a functional IC device with specific characteristics.  When the conducting wiring on one layer of the IC device is completed, another layer of insulating material is added.  The process of alternating insulating and conducting layers is repeated until the desired wiring within the IC device is achieved.  At the end of the process, the wafer is cut into the individual dies, which are then packaged to form individual chips.

Demand for CMP products for IC devices is primarily based on the number of wafer starts by semiconductor manufacturers and the complexity of the IC devices they produce.  To enhance the performance of IC devices, IC device manufacturers have progressively increased the number and density of electronic components and wiring in each IC device.  As a result, the number of wires and the number of discrete wiring layers have increased.  As the complexity of IC devices has increased, the demand for CMP products has also increased.  As semiconductor technology has advanced and performance requirements of IC devices have increased, the percentage of IC devices that utilize CMP in the manufacturing process has increased steadily over time.  We believe that CMP is used in the majority of all IC devices made today, and we expect that the use of CMP will continue to increase in the future.


 
3

 
Index
 

 
In the CMP polishing process, CMP consumables are used to level, smooth and remove excess material from the surfaces of the layers of IC devices via a combination of chemical reactions and mechanical abrasion, leaving minimal residue or defects on the surface, and leaving only the material necessary for circuit integrity.  CMP slurries are liquid solutions generally composed of high-purity deionized water and a proprietary mix of chemical additives and engineered abrasives that chemically and mechanically interact at an atomic level with the surface material of the IC device.  CMP pads are engineered polymeric materials designed to distribute and transport the slurry to the surface of the wafer and distribute it evenly across the wafer.  Grooves are cut into the surface of the pad to facilitate distribution of the slurry.  During the CMP process the wafer is typically held on a rotating carrier, which is pressed down against a rotating polishing table and spun in a circular motion.  The portion of the table that comes in contact with the wafer is covered by a polishing pad.  A CMP slurry is continuously applied to the polishing pad to facilitate and enhance the polishing process.  Hard disk drive manufacturers use similar processes to smooth the surface of substrate disks before depositing magnetic media onto the disk.

An effective CMP process is achieved through technical optimization of the CMP consumables in conjunction with an appropriately designed CMP process.  Prior to introducing new or different CMP slurries or pads into its manufacturing process, an IC device manufacturer generally requires the product to be qualified in its processes through an extensive series of tests and evaluations.  These qualifications are intended to ensure that the CMP consumable product will function properly within our customer’s overall manufacturing process.  These tests may require minor changes to the CMP process or the CMP slurry or pad.  While this qualification process varies depending on numerous factors, it is generally quite costly and may take six months or longer to complete.  IC device manufacturers usually take into account the cost, time required and impact on production when they consider implementing or switching to a new CMP slurry or pad.

CMP enables IC device manufacturers to produce smaller, faster and more complex IC devices with a greater density of transistors and other electronic components than is possible without CMP.  By enabling IC device manufacturers to make smaller IC devices, CMP also allows them to increase the number of IC devices that fit on a wafer.  This increase in the number of IC devices per wafer in turn increases the throughput, or the number of IC devices that can be manufactured in a given time period, and thereby reduces the cost per device.  CMP also helps reduce the number of defective or substandard IC devices produced, which increases the device yield.  Improvements in throughput and yield reduce an IC device manufacturer's unit production costs, and reducing costs is one of the highest priorities of a semiconductor manufacturer as the return on its significant investment in manufacturing capacity can be enhanced by lower unit costs.  More broadly, sustained growth in the semiconductor industry traditionally has been fueled by enhanced performance and lower unit costs, making IC devices more affordable in an expanding range of applications.


PRECISION POLISHING

Through our Engineered Surface Finishes (ESF) business, we are applying our technical expertise in CMP consumables and polishing techniques developed for the semiconductor industry to demanding applications in other industries where shaping, enabling and enhancing the performance of surfaces is critical to success.  We believe we can deliver improvements in production efficiencies, figure precision and surface finish for a variety of difficult-to-polish materials.

Many of the production processes currently used in precision machining and polishing have been based on traditional, labor-intensive techniques, which are being replaced by computer-controlled, deterministic processes.  Our wholly-owned subsidiary, QED Technologies International, Inc. (QED), is a leading provider of deterministic finishing technology for the precision optics industry.  We believe precision optics are pervasive, serving several existing large and growing markets such as semiconductor equipment, aerospace, defense, security and telecommunications, and also offer growth potential in new applications.



 
4

 
Index
 

 
OUR PRODUCTS

CMP CONSUMABLES FOR IC DEVICES

 
We develop, produce and sell CMP slurries for a wide range of polishing applications of materials that conduct electrical signals, including tungsten, copper and tantalum (commonly referred to as “copper barrier” or “barrier”).  Slurries for polishing tungsten are used heavily in the production of memory devices for a multitude of end applications such as computers, MP3 players, cellphones, gaming devices, digital photography and digital video recorders, as well as in mature logic applications such as those used in automobiles.  Our most advanced slurries for tungsten polishing are designed to be customized to provide customers greater flexibility, improved performance and a reduced cost of ownership.  Our slurries for polishing copper and barrier materials are used primarily in the production of advanced IC logic devices such as microprocessors for computers, and devices for graphic systems, gaming systems and communication devices.  These products include different slurries for polishing the copper film and the thin barrier layer used to separate copper from the adjacent insulating material.  We offer multiple products for each technology node to enable different integration schemes depending on specific customer needs.

We also develop, manufacture and sell slurry products used to polish the dielectric insulating materials that separate conductive layers within logic and memory IC devices.  Our core slurry products for these materials are used for a wide variety of high volume applications.  Our advanced dielectrics products are designed to meet the more stringent and complex performance requirements of lower-volume, more specialized dielectric polishing applications at advanced technology nodes.

We develop, produce and sell CMP polishing pads, which are consumable materials that work in conjunction with CMP slurries in the CMP polishing process.  We believe that CMP polishing pads represent a natural adjacency to our CMP slurry business, since the technologies are closely related and utilize the same technical and sales infrastructure.  We believe our unique pad material and our continuous pad manufacturing process enable us to produce a pad with a longer pad life, greater consistency from pad-to-pad, and enhanced performance, resulting in lower cost of ownership for our customers.  We are producing and selling pads that can be used on a variety of polishing tools, over a broad range of applications including tungsten, copper and dielectrics, over a range of technology nodes, and on both 200mm and 300mm wafers.


CMP CONSUMABLES FOR THE DATA STORAGE INDUSTRY

We develop and produce CMP slurries for polishing the materials that coat rigid disks and magnetic heads used in hard disk drives for computer and other data storage applications, which represent an extension of our core CMP slurry technology and manufacturing capabilities established for the semiconductor industry.  We believe CMP significantly improves the surface finish of these coatings, resulting in greater storage capacity of the hard disk drive systems, and also improves the production efficiency of manufacturers of hard disk drives by helping increase their throughput and yield.


PRECISION OPTICS PRODUCTS

Through our QED subsidiary, we design and produce precision polishing and metrology systems for advanced optic applications that allow customers to attain near-perfect shape and surface finish on a range of optical components such as mirrors, lenses and prisms.  Historically, advanced optics have been produced using labor-intensive artisan processes, and variability has been common.  QED has created an automated polishing system that enables rapid, deterministic and repeatable surface correction to the most demanding levels of precision in dramatically less time than with traditional means.  QED’s polishing systems use Magneto-Rheological Finishing (MRF), a proprietary surface figuring and finishing technology, which employs magnetic fluids and sophisticated computer technology to polish a variety of shapes and materials.  Its metrology systems use Subaperture Stitching Interferometry (SSI) technology that captures precise metrology data for large and/or strongly curved optical parts and an Aspheric Stitching Interferometer (ASI), which is designed to measure increasingly complex shapes, including non-spherical surfaces, or aspheres.


 
5

 
Index


STRATEGY

 
We collaborate with our customers to design and manufacture products that offer innovative and reliable solutions to our customers’ challenges and we strive to consistently and reliably deliver and support these products around the world.  We continue to focus on the execution of our primary strategy of strengthening and growing our core CMP consumables business within the semiconductor and hard disk drive industries.  We are also leveraging our expertise in CMP process and slurry formulation to expand our ESF business in the optics, electronic substrates and solar markets.

STRENGTHEN AND GROW OUR CORE CMP CONSUMABLES BUSINESS

As the leader in the CMP slurry industry, we intend to grow our core CMP consumables business through implementation of our three strategic initiatives – maintaining our technological leadership, achieving operations excellence and connecting with our customers.  We believe our strong financial position allows us to fund growth opportunities in our core CMP consumables business through internally developed technologies as well as through potential acquisitions of technologies and businesses such as our acquisition of Epoch in fiscal 2009.

Technology Leadership:  We believe that technology is vital to success in our CMP consumables business and we devote significant resources to research and development.  We continue to develop and produce new CMP products to address existing and new CMP applications.  We need to stay ahead of the rapid technological advances in the semiconductor and data storage industries in order to deliver a broad line of CMP consumables products that meet or exceed our customers' evolving needs.  We have established research and development facilities in the United States, Japan and Singapore in order to meet our customers’ technology needs on a global basis.  In addition, we have recently integrated our existing development capability in Taiwan with Epoch’s research and development capability to provide us with an opportunity to collaborate more effectively with our customers in the Asia Pacific region.

Operations Excellence:  We believe that product quality is critical to success in our business.  Our customers demand increasing performance of our products in terms of product quality and consistency.  We strive to drive out variation in our products and processes in order to increase quality, productivity and efficiency, and improve the uniformity and consistency of performance of our CMP consumable products.  Our global manufacturing sites are managed to ensure we have the people, training and systems needed to support the unique industry demands for product quality.  To support our operations excellence initiative, we have adopted the concepts of Six Sigma across our Company.  Six Sigma is a systematic, data-driven approach and methodology for improving quality by reducing variability.  We believe our Six Sigma initiatives have contributed to significant, sustained improvement in productivity in our operations over the past five fiscal years.  We also have extended our Six Sigma initiative to include joint projects with customers and vendors.  We continue to make improvements to our supply chain to improve the quality and consistency of our products, processes and raw materials, as well as to expand our production capacity.

Connecting With Our Customers:  We believe that building close relationships with our customers is a key to achieving long-term success in our business.  We collaborate with our customers on joint projects to identify and develop new and better CMP consumables, to integrate our products into their manufacturing processes, and to assist them with supply, warehousing and inventory management.  Our customers demand a highly reliable supply source, and we believe we have a competitive advantage because of our ability to timely deliver high-quality products and service from the early stages of product development through the commercial use of our products.  We have devoted significant resources to enhance our close customer relationships and we are committed to continuing this effort.  We strategically locate our research facilities, manufacturing operations and the related technical and customer support teams to be responsive to our customers’ needs.


 
6

 
Index
 

 
The following are some examples of the successful execution of our strategic initiatives during fiscal 2009.

 
The acquisition of Epoch significantly increased our physical presence in Taiwan, the largest CMP market in the world.  We are currently working to capture synergies in the following areas:
o  
We are leveraging our research and development facilities in Taiwan to better utilize the strengths within our overall research and development team.
o  
We have transitioned most of our storage and distribution needs in Taiwan to Epoch’s automated warehouse facility rather than relying on a third party service provider.
o  
We have transitioned to selling directly Epoch’s products outside of Taiwan through the use of our own extensive global sales and logistics network rather than by using third-party distributors.
 
We continued to grow our pad business, despite the global economic recession and its adverse effect on the semiconductor industry, increasing pad revenue from $15 million in fiscal 2008 to nearly $18 million in fiscal 2009.  We are now selling polishing pads to over 20 customers for commercial use in more than 30 different applications.
o  
We continued to improve our pad manufacturing yields in fiscal 2009.  We have improved our pad yields every quarter since we began high volume commercial production.
o  
We completed the installation of on-site pad finishing capability at Taiwan Semiconductor Manufacturing Company (TSMC).
o  
We received an “Editors’ Choice Best Products” award for our D100 polishing pad from Semiconductor International Magazine.
 
We have captured customer feedback through a variety of avenues, including customer-supplied scorecards and Company-initiated surveys.  We use the feedback from our customers to drive further improvements in all facets of our business to increase customer satisfaction.
o  
Our customer satisfaction performance, based on customer-supplied scorecards and our own surveys, has continued to improve year after year.
o  
We have received several customer awards recognizing the Company as a key supplier, including a supplier award from TSMC that we were honored to receive in November 2008.

LEVERAGE OUR EXPERTISE INTO NEW MARKETS - ENGINEERED SURFACE FINISHES BUSINESS

In addition to strengthening and growing our core CMP business, we continue to pursue development of our ESF business.  We believe we can leverage our expertise in CMP consumables for the semiconductor industry to develop products for demanding polishing applications in other industries that are synergistic to our CMP consumables business.  We are focusing on several business areas including precision optics, electronic substrates and solar power.

Similar to our core CMP business, our ESF business is technology driven.  For example, we believe our QED subsidiary is the technology leader in deterministic finishing for the precision optics industry.  In fiscal 2008, QED was awarded a prestigious “R&D 100 award” by R&D Magazine for QED’s development of its SSI-A system.  SSI-A is a precision metrology system that is capable of measuring complex optical surfaces, including those that are non-spherical.  In fiscal 2009, QED enhanced this capability through the introduction of its ASI technology, which allows customers to measure more complex shapes.


INDUSTRY TRENDS

SEMICONDUCTOR INDUSTRY

We believe the semiconductor industry continues to demonstrate several clear trends: the semiconductor business is cyclical; there is constant pressure to reduce costs; and the customer base is consolidating.


 
7

 
Index
 

 
The cyclical nature of the semiconductor industry is closely tied to the global economy as well as to supply and demand within the industry.  We began to see the adverse effects of a global economic recession in our fourth quarter of fiscal 2008.  In response to this global economic downturn, and in light of excess inventories of IC devices, semiconductor manufacturers reduced their production of IC devices through the first calendar quarter of 2009, which significantly reduced their demand for our products.  During the last six months of our fiscal 2009, the industry began to replenish inventories and also experienced some improvement in underlying demand, which positively affected the demand for our products.  We believe the improvement in underlying demand was likely partially driven by government-sponsored stimulus plans, most visibly in China.  There are indications that this global economic recession has ended; however, the timing and pace of a recovery are uncertain.  We are confident that semiconductor industry demand will grow over the long term based on growth in underlying wafer starts.  We also believe that our Company is well positioned to operate successfully over a range of demand environments as we have successfully navigated our business through a number of industry cycles in the past.

As the demand for more advanced and lower cost electronic devices grows, there is increased pressure on IC device manufacturers to reduce their costs.  Many manufacturers reduce costs by pursuing ever-increasing scale in their operations.  In addition, manufacturers seek ways to optimize their production yield while minimizing their production costs regardless of the number of units they produce.  They look for CMP consumables products with improved quality and performance that reduce their overall cost of ownership, and they pursue price reductions on the materials they buy.  This pressure on manufacturers to reduce costs has also led to a continued increase in the use of foundries where semiconductor companies can outsource some or all of their manufacturing to reduce their fixed costs.  This approach also leads to increasing scale and lower costs for these foundries.

The number of semiconductor manufacturers continues to decline both through mergers and acquisitions as well as through alliances among different companies.  Smaller manufacturers do not have the resources to compete with the large manufacturers on the global basis needed in today’s market.  Many of our customers are forming consortia and research and development alliances to better manage the high cost of their development activities.


CMP CONSUMABLES INDUSTRY

Demand for CMP consumables is primarily driven by wafer starts, so the CMP consumables industry reflects the cyclicality of the semiconductor industry.  Our financial results for fiscal 2009 clearly demonstrated this cyclicality.  In the first half of our fiscal 2009, we saw the adverse effects of the global economic recession as our revenues for the first six months of fiscal 2009 decreased over 42% from the comparable period of fiscal 2008.  However, we saw an upturn in our revenue during the second half of fiscal 2009 due to semiconductor manufacturers replenishing their inventories and due to increased underlying demand, partially driven by various economic stimulus plans.  Over the long term, we anticipate the worldwide market for CMP consumables used by IC device manufacturers will grow as a result of expected long term growth in wafer starts, growth in the percentage of IC devices produced that require CMP, an increase in the number of CMP polishing steps required to produce these devices and the introduction of new materials in the manufacture of semiconductor devices.

We expect the anticipated growth in demand will be somewhat mitigated by increased efficiencies in CMP consumable usage as customers seek to reduce their costs.  Semiconductor manufacturers look for ways to lower the cost of CMP consumables in their production operations, including diluting slurry or reducing the slurry flow rate during production to reduce the total amount of slurry used, and extending the polishing time before replacing pads.

As semiconductor technology continues to advance, we believe that CMP technical solutions are becoming more complex, and leading-edge technologies almost always require some customization by customer, tool set and process integration approach.  Leading-edge device designs are introducing more materials and processes into next generation chips, and these new materials and processes must be considered in developing CMP solutions. As a result, customers are selecting suppliers earlier in their development processes and are maintaining preferred supplier relationships through production.  We believe that close collaboration between customers and suppliers offers the best opportunity for optimal CMP solutions.  We also believe that research and development programs are critically important as we develop innovative, high-performing and more cost-effective CMP solutions.



 
8

 
Index
 

 
COMPETITION

We compete in the CMP consumables industry, which is characterized by rapid advances in technology and demanding product quality and consistency requirements.  We face competition from other CMP consumables suppliers, and we also may face competition in the future from significant changes in technology or emerging technologies.  However, we believe we are well positioned to continue our leadership in the CMP slurry industry.  We believe we have the scale, capabilities and infrastructure that are required for success, and we work closely with the largest customers in the semiconductor industry to meet their growing expectations.

Our CMP slurry competitors range from small companies that compete with a single product and/or in a single geographic region to divisions of global companies with multiple lines of IC manufacturing products.  However, we believe we have more CMP slurry business than any other provider.  In our view, we are the only CMP slurry supplier today which serves a broad range of customers by offering and supporting a full line of CMP slurry products for all major applications over a range of technologies, and that has a proven track record of supplying these products globally in high volumes with the attendant required high level of technical support services.

The CMP polishing pad market has been dominated by a single entity that has held this position for a number of years.  A number of other companies are attempting to enter this market, providing potentially viable product alternatives.  We believe our pad materials and our continuous pad manufacturing process have enabled us to produce a pad with a longer pad life with more consistency for our customers, thus reducing their total pad cost.  We believe this has fueled significant growth in sales of our pad products.  We are currently developing our next generation of pad products which we believe could offer our customers an even better solution over a broader range of applications.

Our QED subsidiary operates in the precision optics industry.  There are few direct competitors of QED because its technology is relatively new and unique.  We believe QED’s technology provides a competitive advantage to customers in the precision optics industry which still relies heavily on traditional artisan-based methods of fabrication.


CUSTOMERS, SALES AND MARKETING

Within the semiconductor industry, our customers are primarily producers of logic IC devices, producers of memory IC devices and IC foundries.  Often, logic and memory companies outsource some or all of the production of physical devices to foundries, which provide contract manufacturing services, in order to avoid the high cost of constructing and operating a fab or in cases where they need additional capacity.

Based upon our own observations and customer survey results, we believe the following factors influence our customers’ CMP buying decisions: overall cost of ownership, which represents the cost to purchase, use and maintain a product; product quality and consistency; product yield and performance; engineering support; and delivery/supply assurance.  We believe that greater customer sophistication in the CMP process, more demanding integration schemes, additional and unique polishing materials and cost pressures will add further demands on CMP consumable suppliers. When these factors are combined with our customers’ desires to gain purchasing leverage and lower their cost of ownership, we believe that only the most reliable, innovative, cost effective, service driven CMP consumables suppliers will thrive.

We use an interactive approach to build close relationships with our customers in a variety of areas and we have customer-focused teams located in each major region of sales.  Our sales process begins long before the actual sale of our products and occurs on a number of levels.  Due to the long lead times from research and development to product commercialization and sales, we have research teams that collaborate with customers on emerging applications years before the products are required by the market. We also have development teams that coordinate with our customers, using our research and development facilities and capabilities to design CMP products tailored to their precise needs.  Next, our applications engineers work with customers to integrate our products into their manufacturing processes.  Finally, as part of our sales process, our logistics and sales personnel provide supply, warehousing and inventory management for our customers.


 
9

 
Index
 

 
We market our products primarily through direct sales to our customers, although we use distributors in select areas.  We believe this strategy is one way we can achieve our goal of connecting with our customers.  Our Epoch subsidiary’s products sold outside of Taiwan used to be sold primarily through distributors; as we continue to integrate the Epoch business, we now sell the majority of these products directly through our global sales channels.

Our QED subsidiary supports customers in the semiconductor equipment, aerospace, defense, security and telecommunications markets.  QED counts among its worldwide customers leading precision optics manufacturers, major semiconductor original equipment manufacturers, the United States government and its contractors.

In fiscal 2009, our five largest customers accounted for approximately 42% of our revenue, with TSMC accounting for approximately 17% of our revenue.  For additional information on concentration of customers, refer to Note 2 of “Notes to the Consolidated Financial Statements” included in Item 8 of Part II of this Form 10-K.


RESEARCH, DEVELOPMENT AND TECHNICAL SUPPORT

We believe that technology is vital to success in our CMP business as well as in our ESF business, and we plan to continue to devote significant resources to research, development and technical support (R&D), and balance our efforts between the shorter-term market needs and the longer-term investments required of us as a technology leader.  We develop and formulate new and enhanced CMP consumables and new CMP processes tailored to our customers' needs.  We work closely with our customers at their facilities to identify their specific technology and manufacturing challenges and to translate these challenges into viable CMP process solutions.

Our technology efforts are currently focused on five main areas that span the early conceptual stage of product development involving new materials, processes and designs several years in advance of commercialization, through to continuous improvement of already commercialized products in daily use in our customers’ manufacturing facilities.  These five areas are:

·  
Research related to fundamental CMP technology;
·  
Development and formulation of new and enhanced CMP consumables products, including collaborating on joint development projects with our customers;
·  
Process development to support rapid and effective commercialization of new products;
·  
Technical support of CMP products in our customers’ manufacturing facilities; and
·  
Evaluation of new polishing and metrology applications outside of the semiconductor industry.

Our research in CMP slurries and pads addresses a breadth of complex and interrelated performance criteria that relate to the functional performance of the chip, our customers’ manufacturing yield, and their overall cost of ownership.   We design slurries and pads that are capable of polishing one or more materials, sometimes at the same time, that make up the semiconductor circuitry.  Additionally, our products must achieve the desired surface conditions at high polishing rates, high processing yields and low consumables costs in order to earn acceptable system economics for our customers.  As dimensions become smaller and as materials and designs increase in complexity, these challenges require significant investments in R&D.

Beyond CMP for the semiconductor and data storage industries, we also commit internal R&D resources to our ESF business.  We believe that a number of application areas we are currently developing represent natural adjacencies to our core CMP business and technology, such as precision optics, electronic substrates and solar power.  Products under development include products used to polish silicon and silicon-carbide wafers to improve the surface quality of these wafers and reduce the customers’ total cost of ownership.


 
10

 
Index
 

 
We believe that competitive advantage lies in technology leadership, and that our investments in R&D provide us with leading-edge polishing and metrology capabilities to support the most advanced and challenging customer technology requirements on a global basis.  In fiscal 2009, 2008 and 2007, we incurred approximately $48.2 million, $49.2 million and $50.0 million, respectively, in R&D expenses.  We believe our Six Sigma initiatives in our R&D efforts realized over $3 million in cost savings in fiscal 2009, allowing us to conduct more research at a lower cost.  Investments in property, plant and equipment to support our R&D efforts are capitalized and depreciated over their useful lives.  We operate a R&D facility in Aurora, Illinois, that is staffed by a team that includes experts from the semiconductor industry and scientists from key disciplines required for the development of high-performance CMP consumable products.  This facility features a Class 1 clean room and advanced equipment for product development, including 300 mm polishing and metrology capabilities, the experimental results from which we believe correlate closely with what our customers experience when using our products in their factories.  In addition, we operate a technology center in Japan, which includes 300 mm polishing, metrology and slurry development capability, which we believe enhances our ability to provide optimized CMP solutions to our customers in the Asia Pacific region.  Epoch also has R&D capability, including a clean room with 200 mm polishing capability.  These facilities underscore our commitment both to continuing to invest in our technology infrastructure to maintain our technology leadership, and to becoming even more responsive to the needs of our customers.  Other examples of this commitment include our QED research facility in Rochester, New York, as well as our laboratory in Singapore that provides additional slurry formulation capability to support the data storage industry.


RAW MATERIALS SUPPLY

Metal oxides, such as silica and alumina, are significant raw materials we use in many of our CMP slurries.  In the interest of supply assurance, our strategy is to secure multiple sources of raw materials and qualify and monitor those sources as necessary to ensure our supply of raw materials remains uninterrupted.  Also, we have entered into multi-year supply agreements with a number of suppliers for the purchase of raw materials, including agreements with Cabot Corporation for the purchase of certain amounts and types of fumed silica and fumed alumina.  For additional information regarding these agreements, refer to “Tabular Disclosure of Contractual Obligations”, included in “Management’s Discussion and Analysis of Financial Condition and Results of Operations”, in Item 7 of Part II of this Form 10-K.


INTELLECTUAL PROPERTY

Our intellectual property is important to our success and ability to compete.  As of October 31, 2009, we had 188 active U.S. patents and 94 pending U.S. patent applications.  In most cases we file counterpart foreign patent applications.  Many of these patents are important to our continued development of new and innovative products for CMP and related processes, as well as for new businesses.  Our patents have a range of duration and we do not expect to lose any material patent through expiration in the next five years.  We attempt to protect our intellectual property rights through a combination of patent, trademark, copyright and trade secret laws, as well as employee and third party nondisclosure and assignment agreements.  We vigorously and proactively pursue parties that attempt to compromise our investments in research and development by infringing our intellectual property.  For example, in January 2007, we filed a legal action against DuPont Air Products NanoMaterials LLC (DA Nano), a competitor of ours, charging that DA Nano’s manufacture and marketing of certain CMP slurries infringe five CMP slurry patents that we own, and that litigation is ongoing.  In addition, in the third quarter of fiscal 2006, we were successful in an action we brought before the United States International Trade Commission (ITC) concerning Cheil Industries, Inc. (Cheil) which resulted in the prohibition of the importation and sale within the United States of certain CMP slurries that infringe certain of our patents, and we have litigation currently ongoing in Korea against Cheil regarding the same patent family.

Most of our intellectual property has been developed internally, but we also may acquire intellectual property from others to enhance our intellectual property portfolio.  These enhancements may be via licenses or assignments or we may acquire certain proprietary technology and intellectual property when we make acquisitions, such as through our acquisitions of Epoch, QED and Surface Finishes Co.  We believe these technology rights continue to enhance our competitive advantage by providing us with future product development opportunities and expanding our already substantial intellectual property portfolio.



 
11

 
Index
 

 
ENVIRONMENTAL MATTERS

Our facilities are subject to various environmental laws and regulations, including those relating to air emissions, wastewater discharges, the handling and disposal of solid and hazardous wastes, and occupational safety and health.  We believe that our facilities are in substantial compliance with applicable environmental laws and regulations.  By utilizing Six Sigma in our environmental management system process, we believe we have improved operating efficiencies while protecting the environment.  Our operations in the United States, Japan and Taiwan are ISO 14001 Certified, which requires that we implement and operate according to various procedures that demonstrate our dedication to waste reduction, energy conservation and other environmental concerns.  We are committed to maintaining these certifications and are actively pursuing ISO 14001 certification for our operations in Singapore.  We will also obtain additional certifications, as applicable, in the areas in which we do business.  We have incurred, and will continue to incur, capital and operating expenditures and other costs in complying with these laws and regulations in both the United States and abroad.  However, we currently do not anticipate that the future costs of environmental compliance will have a material adverse effect on our business, financial condition or results of operations.


EMPLOYEES

We believe we have a world-class team of employees who make our Company successful.  As of October 31, 2009, we employed 882 individuals, including 460 in operations, 219 in research and development and technical, 93 in sales and marketing and 110 in administration.  None of our employees are covered by collective bargaining agreements.  We have not experienced any work stoppages and in general consider our relations with our employees to be good.


FINANCIAL INFORMATION ABOUT GEOGRAPHIC AREAS

We sell our products worldwide.  Our geographic coverage allows us to utilize our business and technical expertise from a worldwide workforce, provides stability to our operations and revenue streams to offset geography-specific economic trends, and offers us an opportunity to take advantage of new markets for products.

For more financial information about geographic areas, see Note 19 of “Notes to the Consolidated Financial Statements” included in Item 8 of Part II of this Form 10-K.


AVAILABLE INFORMATION

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, definitive proxy statements on Form 14A, current reports on Form 8-K, and any amendments to those reports are made available free of charge on our Company website, www.cabotcmp.com, as soon as reasonably practicable after such reports are filed with the Securities and Exchange Commission (SEC).   Statements of changes in beneficial ownership of our securities on Form 4 by our executive officers and directors are made available on our Company website by the end of the business day following the submission to the SEC of such filings.  In addition, the SEC’s website (http://www.sec.gov) contains reports, proxy statements, and other information that we file electronically with the SEC.



 
12

 
Index
 

 
ITEM 1A.  RISK FACTORS

We do not believe there have been any material changes in our risk factors since the filing of our Annual Report on Form 10-K for the fiscal year ended September 30, 2008 other than the risks related to worldwide economic and industry conditions, as described below.  We may update our risk factors in our SEC filings from time to time for clarification purposes or to include additional information, at management's discretion, even when there have been no material changes.


RISKS RELATING TO OUR BUSINESS

DEMAND FOR OUR PRODUCTS FLUCTUATES AND OUR BUSINESS MAY BE ADVERSELY AFFECTED BY WORLDWIDE ECONOMIC AND INDUSTRY CONDITIONS

Our business is affected by economic and industry conditions and our revenue is dependent upon semiconductor demand.  Semiconductor demand, in turn, is impacted by semiconductor industry cycles, and these cycles can dramatically affect our business.  These cycles may be characterized by decreases in product demand, excess customer inventories, and accelerated erosion of prices.  Our business has been significantly impacted by the global economic recession.  We first began to see significant adverse effects of this in our fourth quarter of fiscal 2008 as the reduction in end user demand for IC devices caused semiconductor manufacturers to reduce their production, which reduced the demand for our CMP consumables products.  We believe weakness of the U.S. and global economy and stress in the financial markets have persisted, and this caused a significant decrease in demand for our products during fiscal 2009, as our revenue decreased 22.3% from revenue earned in fiscal 2008.  Although demand for our products increased significantly during the second half of fiscal 2009 from the level achieved during the first half of the fiscal year, it is uncertain if this increase in demand will continue.  If global economic conditions remain uncertain or deteriorate further, we may experience additional material adverse impacts on our results of operations and financial condition.

Continued adverse global economic conditions may have other negative effects on our Company such as:
·  
The ability of our customers to pay their obligations to us may be adversely affected causing a negative impact on our cash flows and our results of operations as evidenced by the bankruptcy filing of a small number of our customers in fiscal 2009.
·  
The carrying value of our goodwill and other intangible assets may decline in value, which could harm our financial position and results of operations.
·  
Our suppliers may not be able to fulfill their obligations to us, which could harm our production process and our business.

Some additional factors that affect demand for our products include customers’ production of logic versus memory devices, their transition from 200 mm to 300 mm wafers, customers’ specific integration schemes, share gains and losses and pricing changes by us and our competitors.


WE HAVE A NARROW PRODUCT RANGE AND OUR PRODUCTS MAY BECOME OBSOLETE, OR TECHNOLOGICAL CHANGES MAY REDUCE OR LIMIT INCREASES IN THE CONSUMPTION OF CMP SLURRIES AND PADS

Our business is substantially dependent on a single class of products, CMP slurries, which account for the majority of our revenue.  Our business in CMP pads is also developing and growing.  Our business would suffer if these products became obsolete or if consumption of these products decreased.  Our success depends on our ability to keep pace with technological changes and advances in the semiconductor industry and to adapt, improve and customize our products for advanced IC applications in response to evolving customer needs and industry trends.  Since its inception, the semiconductor industry has experienced rapid technological changes and advances in the design, manufacture, performance and application of IC devices, and our customers continually pursue lower cost of ownership of materials consumed in their manufacturing processes, including CMP slurries and pads.  We expect these technological changes and advances, and this drive toward lower costs, will continue in the future.  Potential technology developments in the semiconductor industry, as well as our customers’ efforts to reduce consumption of CMP slurries and pads and possible reuse or recycling of slurries, could render our products less important to the IC device manufacturing process.

 
 
13

 
Index

 
A SIGNIFICANT AMOUNT OF OUR BUSINESS COMES FROM A LIMITED NUMBER OF LARGE CUSTOMERS AND OUR REVENUE AND PROFITS COULD DECREASE SIGNIFICANTLY IF WE LOST ONE OR MORE OF THESE CUSTOMERS

Our customer base is concentrated among a limited number of large customers.  One or more of these principal customers could stop buying CMP consumables from us or could substantially reduce the quantity of CMP consumables they purchase from us.  Our principal customers also hold considerable purchasing power, which can impact the pricing and terms of sale of our products.  Any deferral or significant reduction in CMP consumables sold to these principal customers, or a significant number of smaller customers, could seriously harm our business, financial condition and results of operations.

In fiscal 2009, our five largest customers accounted for approximately 42% of our revenue, with Taiwan Semiconductor Manufacturing Company (TSMC) accounting for approximately 17% of our revenue.  In fiscal 2008, our five largest customers accounted for approximately 44% of our revenue; with TSMC accounting for approximately 17% of our revenue.


OUR BUSINESS COULD BE SERIOUSLY HARMED IF OUR COMPETITORS DEVELOP SUPERIOR SLURRY PRODUCTS, OFFER BETTER PRICING TERMS OR SERVICE, OR OBTAIN CERTAIN INTELLECTUAL PROPERTY RIGHTS

Competition from other CMP slurry manufacturers could seriously harm our business and results of operations.  Competition from other providers of CMP slurries could continue to increase, and opportunities exist for other companies to emerge as potential competitors by developing their own CMP slurry products.  Increased competition has and may continue to impact the prices we are able to charge for our slurry products as well as our overall business.  In addition, our competitors could have or obtain intellectual property rights which could restrict our ability to market our existing products and/or to innovate and develop new products.


ANY PROBLEM OR DISRUPTION IN OUR SUPPLY CHAIN, INCLUDING SUPPLY OF OUR MOST IMPORTANT RAW MATERIALS, OR IN OUR ABILITY TO MANUFACTURE AND DELIVER OUR PRODUCTS TO OUR CUSTOMERS,  COULD ADVERSELY AFFECT OUR RESULTS OF OPERATIONS

We depend on our supply chain to enable us to meet the demands of our customers.  Our supply chain includes the raw materials we use to manufacture our products, our production operations, and the means by which we deliver our products to our customers.  Our business could be adversely affected by any problem or interruption in our supply of the key raw materials we use in our CMP slurries and pads, including fumed silica, which we use for certain of our slurries, or any problem or interruption that may occur during production or delivery of our products, such as weather-related problems or natural disasters.

For instance, Cabot Corporation continues to be our primary supplier of particular amounts and types of fumed silica.  We believe it would be difficult to promptly secure alternative sources of key raw materials, including fumed silica, in the event one of our suppliers becomes unable to supply us with sufficient quantities of raw materials that meet the quality and technical specifications required by our customers.  In addition, contractual amendments to the existing agreements with, or non-performance by, our suppliers, including any significant financial distress our suppliers may suffer, could adversely affect us. Also, if we change the supplier or type of key raw materials we use to make our CMP slurries or pads, or are required to purchase them from a different manufacturer or manufacturing facility or otherwise modify our products, in certain circumstances our customers might have to requalify our CMP slurries and pads for their manufacturing processes and products.  The requalification process could take a significant amount of time and expense to complete and could motivate our customers to consider purchasing products from our competitors, possibly interrupting or reducing our sales of CMP consumables to these customers.



 
14

 
Index
 

 
WE ARE SUBJECT TO RISKS ASSOCIATED WITH OUR FOREIGN OPERATIONS

We currently have operations and a large customer base outside of the United States.  Approximately 84%, 81% and 79% of our revenue was generated by sales to customers outside of the United States for fiscal 2009, 2008 and 2007, respectively.  We encounter risks in doing business in certain foreign countries, including, but not limited to, adverse changes in economic and political conditions, fluctuation in exchange rates, compliance with a variety of foreign laws and regulations, as well as difficulty in enforcing business and customer contracts and agreements, including protection of intellectual property rights.


WE MAY PURSUE ACQUISITIONS OF, INVESTMENTS IN, AND STRATEGIC ALLIANCES WITH OTHER ENTITIES, WHICH COULD DISRUPT OUR OPERATIONS AND HARM OUR OPERATING RESULTS IF THEY ARE UNSUCCESSFUL

We expect to continue to make investments in companies, either through acquisitions, investments or alliances, in order to supplement our internal growth and development efforts.  Acquisitions and investments, including our acquisition of Epoch Material Co., Ltd., a Taiwan-based company, the first closing of which we completed in the fiscal quarter ended March 31, 2009, involve numerous risks, including the following: difficulties in integrating the operations, technologies, products and personnel of acquired companies; diversion of management’s attention from normal daily operations of the business; increased risk associated with foreign operations; potential difficulties in entering markets in which we have limited or no direct prior experience and where competitors in such markets have stronger market positions; potential difficulties in operating new businesses with different business models; potential difficulties with regulatory or contract compliance in areas in which we have limited experience; initial dependence on unfamiliar supply chains or relatively small supply partners; insufficient revenues to offset increased expenses associated with acquisitions; potential loss of key employees of the acquired companies; or inability to effectively cooperate and collaborate with our alliance partners.

Further, we may never realize the perceived or anticipated benefits of a business combination or investments in other entities.  Acquisitions by us could have negative effects on our results of operations, in areas such as contingent liabilities, gross profit margins, amortization charges related to intangible assets and other effects of accounting for the purchases of other business entities.  Investments in and acquisitions of technology-related companies are inherently risky because these businesses may never develop, and we may incur losses related to these investments.  In addition, we may be required to write down the carrying value of these acquisition or investments to reflect other than temporary declines in their value, which could harm our business and results of operations.


BECAUSE WE HAVE LIMITED EXPERIENCE IN BUSINESS AREAS OUTSIDE OF CMP SLURRIES, EXPANSION OF OUR BUSINESS INTO NEW PRODUCTS AND APPLICATIONS MAY NOT BE SUCCESSFUL

An element of our strategy has been to leverage our current customer relationships and technological expertise to expand our CMP business from CMP slurries into other areas, such as CMP polishing pads.  Additionally, pursuant to our Engineered Surface Finishes business, we are pursuing a number of surface modification applications, such as high precision optics.  Expanding our business into new product areas could involve technologies, production processes and business models in which we have limited experience, and we may not be able to develop and produce products or provide services that satisfy customers’ needs or we may be unable to keep pace with technological or other developments.  Also, our competitors may have or obtain intellectual property rights which could restrict our ability to market our existing products and/or to innovate and develop new products.



 
15

 
Index
 

 
BECAUSE WE RELY HEAVILY ON OUR INTELLECTUAL PROPERTY, OUR FAILURE TO ADEQUATELY OBTAIN OR PROTECT IT COULD SERIOUSLY HARM OUR BUSINESS

Protection of intellectual property is particularly important in our industry because we develop complex technical formulas for CMP products that are proprietary in nature and differentiate our products from those of our competitors.  Our intellectual property is important to our success and ability to compete.  We attempt to protect our intellectual property rights through a combination of patent, trademark, copyright and trade secret laws, as well as employee and third-party nondisclosure and assignment agreements.  Due to our international operations, we pursue protection in different jurisdictions, which may provide varying degrees of protection, and we cannot provide assurance that we can obtain adequate protection in each such jurisdiction.  Our failure to obtain or maintain adequate protection of our intellectual property rights for any reason, including through the patent prosecution process or in the event of litigation related to such intellectual property, such as the current litigation between us and DuPont Air Products Nanomaterials described above in Part I, Item 1 under the heading “Intellectual Property” and in Part I, Item 3 under the heading “Legal Proceedings”, could seriously harm our business.  In addition, the costs of obtaining or protecting our intellectual property could negatively affect our operating results.


WE MAY NOT BE ABLE TO MONETIZE OUR INVESTMENTS IN AUCTION RATE SECURITIES IN THE SHORT TERM AND WE COULD EXPERIENCE A DECLINE IN THEIR MARKET VALUE, WHICH COULD ADVERSELY AFFECT OUR FINANCIAL RESULTS

We owned auction rate securities (ARS) with an estimated fair value of $8.1 million ($8.3 million par value) at September 30, 2009, which were classified as Other Long-Term Assets on our Consolidated Balance Sheet.  If auctions involving our ARS continue to fail, if issuers of our ARS are unable to refinance the underlying securities, if issuers are unable to pay debt obligations and related bond insurance fails, or if credit ratings decline or other adverse developments occur in the credit markets, then we may not be able to monetize these securities in the foreseeable future.  We may also be required to further adjust the carrying value of these instruments through an impairment charge that may be deemed other-than-temporary which would adversely affect our financial results.


OUR INABILITY TO ATTRACT AND RETAIN KEY PERSONNEL COULD CAUSE OUR BUSINESS TO SUFFER

If we fail to attract and retain the necessary managerial, technical and customer support personnel, our business and our ability to maintain existing and obtain new customers, develop new products and provide acceptable levels of customer service could suffer.  We compete with other industry participants for qualified personnel, particularly those with significant experience in the semiconductor industry.  The loss of services of key employees could harm our business and results of operations.


RISKS RELATING TO THE MARKET FOR OUR COMMON STOCK

THE MARKET PRICE MAY FLUCTUATE SIGNIFICANTLY AND RAPIDLY

The market price of our common stock has fluctuated and could continue to fluctuate significantly as a result of factors such as: economic and stock market conditions generally and specifically as they may impact participants in the semiconductor and related industries; changes in financial estimates and recommendations by securities analysts who follow our stock; earnings and other announcements by, and changes in market evaluations of, us or participants in the semiconductor and related industries; changes in business or regulatory conditions affecting us or participants in the semiconductor and related industries; announcements or implementation by us, our competitors, or our customers of technological innovations, new products or different business strategies; and trading volume of our common stock.



 
16

 
Index
 

 
ANTI-TAKEOVER PROVISIONS UNDER OUR CERTIFICATE OF INCORPORATION AND BYLAWS AND OUR RIGHTS PLAN MAY DISCOURAGE THIRD PARTIES FROM MAKING AN UNSOLICITED BID FOR OUR COMPANY

Our certificate of incorporation, our bylaws, our rights plan and various provisions of the Delaware General Corporation Law may make it more difficult to effect a change in control of our Company.  For example, our amended and restated certificate of incorporation authorizes our Board of Directors to issue up to 20 million shares of blank check preferred stock and to attach special rights and preferences to this preferred stock, which may make it more difficult or expensive for another person or entity to acquire control of us without the consent of our Board of Directors.  Also our amended and restated certificate of incorporation provides for the division of our Board of Directors into three classes as nearly equal in size as possible with staggered three-year terms.

We have adopted change in control arrangements covering our executive officers and other key employees.  These arrangements provide for a cash severance payment, continued medical benefits and other ancillary payments and benefits upon termination of service of a covered employee’s employment following a change in control, which may make it more expensive to acquire our Company.


ITEM 1B.  UNRESOLVED STAFF COMMENTS

None.



 
17

 
Index
 

 
ITEM 2.  PROPERTIES

Our principal U.S. facilities that we own consist of:

§  
a global headquarters and research and development facility in Aurora, Illinois, comprising approximately 200,000 square feet;
§  
a commercial dispersion plant and distribution center in Aurora, Illinois, comprising approximately 175,000 square feet;
§  
a commercial polishing pad manufacturing plant and offices in Aurora, Illinois, comprising approximately 48,000 square feet;
§  
an additional 13.2 acres of vacant land in Aurora, Illinois; and
§  
a facility in Addison, Illinois, comprising approximately 15,000 square feet.

In addition, we lease a facility in Rochester, New York, comprising approximately 21,000 square feet.

Our principal foreign facilities that we or our subsidiaries own consist of:

§  
a commercial dispersion plant, automated warehouse, research and development facility and offices in Kaohsiung County, Taiwan, comprising approximately 170,000 square feet;
§  
a commercial dispersion plant and distribution center in Geino, Japan, comprising approximately 113,000 square feet;
§  
a development and technical support facility in Geino, Japan, comprising approximately 20,000 square feet.

Our principal foreign facilities that we lease consist of:

§  
an office, research and development laboratory and polishing pad manufacturing plant in Hsin-Chu, Taiwan, comprising approximately 31,000 square feet;
§  
a commercial manufacturing plant, research and development facility and business office in Singapore, comprising approximately 24,000 square feet.

We believe that our facilities are suitable and adequate for their intended purpose and provide us with sufficient capacity and capacity expansion opportunities and technological capability to meet our current and expected demand in the foreseeable future.


 
18

 
Index


ITEM 3.  LEGAL PROCEEDINGS

While we are not involved in any legal proceedings that we believe will have a material impact on our consolidated financial position, results of operations or cash flows, we periodically become a party to legal proceedings in the ordinary course of business.  For example, in January 2007, we filed a legal action against DuPont Air Products NanoMaterials LLC (DA Nano), a CMP slurry competitor, in the United States District Court for the District of Arizona, charging that DA Nano’s manufacturing and marketing of CMP slurries infringe five CMP slurry patents that we own.  The affected DA Nano products include certain products used for tungsten CMP.  We filed our infringement complaint as a counterclaim in response to an action filed by DA Nano in the same court in December 2006 that seeks declaratory relief and alleges non-infringement, invalidity and unenforceability regarding some of the patents at issue in our complaint against DA Nano.  DA Nano filed its complaint following our refusal of its request that we license to it our patents raised in its complaint.  DA Nano’s complaint does not allege any infringement by our products of intellectual property owned by DA Nano.  On July 25, 2008, the District Court issued its patent claim construction, or “Markman” Order (“Markman Order”) in the litigation.  In a Markman ruling, a district court hearing a patent infringement case interprets and rules on the scope and meaning of disputed patent claim language regarding the patents in suit.  We believe that a Markman decision is often a significant factor in the progress and outcome of patent infringement litigation.  In the Markman Order, the District Court adopted interpretations that we believe are favorable to Cabot Microelectronics on all claim terms that were in dispute in the litigation.  On January 27, 2009, we filed a motion for summary judgment on DA Nano’s infringement of certain of the patents at issue in the suit, and on that same date, DA Nano filed a motion for summary judgment on non-infringement and invalidity of certain of the patents at issue in the suit.  On November 16, 2009, the District Court issued its ruling on all of these respective summary judgment motions.  In its summary judgment ruling, the District Court denied a motion filed by DA Nano for summary judgment of invalidity of three of our patents at issue in the case, which are fundamental patents in the field of tungsten CMP.  The District Court also denied DA Nano’s motion for summary judgment of non-infringement of these patents.  In addition, the District Court denied DA Nano’s motion for summary judgment of non-infringement of another one of our patents at issue in the suit that is considered to be a foundational CMP patent.  The District Court also denied Cabot Microelectronics’ motion for summary judgment of infringement of the tungsten patents, stating that despite the weight of the record on DA Nano's infringement, summary judgment is not the forum to decide issues of fact that remain.  We believe that the recently issued summary judgment ruling supports our position on the merits of the case with regard to the evidence of DA Nano’s infringement of our tungsten patents and the lack of evidence of invalidity of these patents.  Although no trial date has yet been set, as part of the summary judgment ruling, the District Court has ordered the parties to submit pretrial filings by December 16, 2009, and as a result of this and the ruling on the summary judgment motions, we now expect the case to proceed in a timely manner, with trial possibly scheduled for the first half of calendar 2010.  While the outcome of this and any legal matter cannot be predicted with certainty, we continue to believe that our claims and defenses in the pending action are meritorious, and we intend to continue to pursue and defend them vigorously.


ITEM 4.  SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.




 
19

 
Index


EXECUTIVE OFFICERS OF THE REGISTRANT

Set forth below is information concerning our executive officers and their ages as of October 31, 2009.

NAME
 
AGE
 
POSITION
         
William P. Noglows
 
51
 
Chairman of the Board, President and Chief Executive Officer
H. Carol Bernstein
 
49
 
Vice President, Secretary and General Counsel
Yumiko Damashek
 
53
 
Vice President, Japan and Operations Asia
William S. Johnson
 
52
 
Vice President and Chief Financial Officer
David H. Li
 
36
 
Vice President, Asia Pacific Region
Daniel J. Pike
 
46
 
Vice President, Corporate Development
Stephen R. Smith
 
50
 
Vice President, Marketing
Clifford L. Spiro
 
55
 
Vice President, Research and Development
Adam F. Weisman
 
47
 
Vice President, Business Operations
Daniel S. Wobby
 
46
 
Vice President, Global Sales
Thomas S. Roman
 
48
 
Principal Accounting Officer and Corporate Controller

WILLIAM P. NOGLOWS has served as our Chairman, President and Chief Executive Officer since November 2003.  Mr. Noglows had previously served as a director of our Company from January 2000 until April 2002.  Prior to joining us, Mr. Noglows served as an Executive Vice President of Cabot Corporation from 1998 to June 2003.  Prior to that, Mr. Noglows held various management positions at Cabot Corporation including General Manager of Cabot Corporation’s Cab-O-Sil Division, where he was one of the primary founders of our Company when our business was a division of Cabot Corporation, and was responsible for identifying and encouraging the development of the CMP application.  Mr. Noglows received his B.S. in Chemical Engineering from the Georgia Institute of Technology.  Mr. Noglows is also a director of Littelfuse, Inc.

H. CAROL BERNSTEIN has served as our Vice President, Secretary and General Counsel since August 2000.  From January 1998 until joining us, Ms. Bernstein served as the General Counsel and Director of Industrial Technology Development of Argonne National Laboratory, which is operated by the University of Chicago for the United States Department of Energy.  From May 1985 until December 1997, she served in various positions with the IBM Corporation, culminating in serving as an Associate General Counsel, and was the Vice President, Secretary and General Counsel of Advantis Corporation, an IBM joint venture.  Ms. Bernstein received her B.A. from Colgate University and her J.D. from Northwestern University; she is a member of the Bar of the states of Illinois and New York.

YUMIKO DAMASHEK has served as our Vice President, Japan and Operations Asia since June 2008.  Previously, Ms. Damashek served as Managing Director of Japan since November 2005.  Prior to joining us, Ms. Damashek served as President for Celerity Japan, Inc.  Prior to that, she held various leadership positions at Global Partnership Creation, Inc. and Millipore Corporation.  Ms. Damashek received her B.A. from the University of Arizona and her M.B.A. from San Diego State University.

WILLIAM S. JOHNSON has served as our Vice President and Chief Financial Officer since April 2003.  Prior to joining us, Mr. Johnson served as Executive Vice President and Chief Financial Officer for Budget Group, Inc. from August 2000 to March 2003.  Before that, Mr. Johnson spent 16 years at BP Amoco in various senior finance and management positions, the most recent of which was President of Amoco Fabrics and Fibers Company.  Mr. Johnson received his B.S. in Mechanical Engineering from the University of Oklahoma and his M.B.A. from the Harvard Business School.

DAVID H. LI has served as our Vice President, Asia Pacific Region since June 2008.  Prior to that, Mr. Li served as Managing Director of Korea and China since February 2007.  Previously, Mr. Li served as our Global Business Director for Tungsten and Advanced Dielectrics from 2005 to February 2007.  Mr. Li held a variety of leadership positions for us in operations, sourcing and investor relations between 1998 and 2005.  Prior to joining us, Mr. Li worked for UOP in marketing and process engineering.  Mr. Li received a B.S. in Chemical Engineering from Purdue University and an M.B.A. from Northwestern University - Kellogg School of Management.

 
20

 
Index


DANIEL J. PIKE has served as our Vice President of Corporate Development since January 2004 and prior to that was our Vice President of Operations from December 1999.  Mr. Pike served as Division Director of Global Operations for Cabot Corporation from 1996 to 1999.  Prior to that, Mr. Pike worked for FMC Corporation in various marketing and finance positions.  Mr. Pike received his B.S. in Chemical Engineering from the University of Buffalo and his M.B.A. from the Wharton School of Business of the University of Pennsylvania.

STEPHEN R. SMITH has served as our Vice President of Marketing since September 2006, and previously was our Vice President of Marketing and Business Management since April 2005 and our Vice President of Sales and Marketing from October 2001.  Prior to joining us, Mr. Smith served as Vice President, Sales & Business Development for Buildpoint Corporation from 2000 to October 2001.  Prior to that, Mr. Smith spent 17 years at Tyco Electronics Group, formerly known as AMP Incorporated, in various management positions.  Mr. Smith earned a B.S. in Industrial Engineering from Grove City College and an M.B.A. from Wake Forest University.

CLIFFORD L. SPIRO has served as Vice President of Research and Development since December 2003.  Prior to joining us, Dr. Spiro served as Vice President of Research and Development at Ondeo-Nalco from 2001 through November 2003.  Prior to that, Dr. Spiro held research and development management and senior technology positions at the General Electric Company from 1980 through 2001, the most recent of which was Global Manager – Technology for Business Development.  Dr. Spiro received his B.S. in Chemistry from Stanford University and his Ph.D. in Chemistry from the California Institute of Technology.  Dr. Spiro is a director of Strategic Diagnostic Corporation.

ADAM F. WEISMAN has served as our Vice President of Business Operations since September 2006, and prior to that was our Vice President of Operations.  Before joining us, Mr. Weisman held various engineering and senior operations management positions with the General Electric Company from 1988 through 2004, including having served as the General Manager of Manufacturing for GE Plastics - Superabrasives, and culminating in serving as the Executive Vice President of Operations for GE Railcar Services.  Prior to joining GE, he worked as an engineering team leader and pilot plant manager for E.I. Du Pont de Nemours & Company.  Mr. Weisman holds a B.S. in Ceramic Engineering from Alfred University.

DANIEL S. WOBBY has served as our Vice President of Global Sales since June 2008.  Prior to that, Mr. Wobby served as Vice President, Asia Pacific Region since September 2005.  Previously, Mr. Wobby served as Vice President, Greater China and Southeast Asia starting in February 2004 and as Corporate Controller and Principal Accounting Officer from 2000 to 2004.  From 1989 to 2000, Mr. Wobby held various accounting and operations positions with Cabot Corporation culminating in serving as Director of Finance.  Mr. Wobby earned a B.S. in Accounting from St. Michael’s College and an M.B.A. from the University of Chicago.

THOMAS S. ROMAN has served as our Corporate Controller and Principal Accounting Officer since February 2004 and previously served as our North American Controller.  Prior to joining us in April 2000, Mr. Roman was employed by FMC Corporation in various financial reporting, tax and audit positions.  Before that, Mr. Roman worked for Gould Electronics and Arthur Andersen LLP.  Mr. Roman is a C.P.A. and earned a B.S. in Accounting from the University of Illinois and an M.B.A. from DePaul University’s Kellstadt Graduate School of Business.


 
21

 
Index


PART II

ITEM 5.  MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Our common stock has traded publicly under the symbol "CCMP" since our initial public offering in April 2000, currently on the NASDAQ Global Select Market, and formerly the NASDAQ National Market.  The following table sets forth the range of quarterly high and low closing sales prices for our common stock.

   
HIGH
LOW
Fiscal 2008
     
 
First Quarter
46.44
35.27
 
Second Quarter
36.00
30.48
 
Third Quarter
37.64
31.24
 
Fourth Quarter
42.80
31.55
Fiscal 2009
     
 
First Quarter
32.39
20.23
 
Second Quarter
26.96
19.01
 
Third Quarter
31.50
24.52
 
Fourth Quarter
36.04
26.94
Fiscal 2010 First Quarter (through October 31, 2009)
35.47
31.98


As of October 31, 2009, there were approximately 1,048 holders of record of our common stock.  No dividends were declared or paid in either fiscal 2009 or fiscal 2008 and we have no current plans to pay cash dividends in the future.


ISSUER PURCHASES OF EQUITY SECURITIES

In January 2008, we announced that our Board of Directors had authorized a share repurchase program for up to $75.0 million of our outstanding common stock.  Shares are repurchased from time to time, depending on market conditions, in open market transactions, at management’s discretion.  We fund share repurchases from our existing cash balance.  The program, which became effective on the authorization date, may be suspended or terminated at any time, at the Company’s discretion.  We view the program as a flexible and effective means to return cash to shareholders.  No shares were repurchased under this program during the fiscal quarter or fiscal year ended September 30, 2009.

Separate from this share repurchase program, a total of 14,425 shares were purchased during fiscal 2009 pursuant to the terms of our Second Amended and Restated Cabot Microelectronics Corporation 2000 Equity Incentive Plan (EIP) as shares withheld from award recipients to cover payroll taxes on the vesting of shares of restricted stock granted under the EIP.  No shares were purchased under the EIP during the fiscal quarter ended September 30, 2009.

EQUITY COMPENSATION PLAN INFORMATION

See Part II, Item 12 of this Form 10-K for information regarding shares of common stock that may be issued under the Company’s existing equity compensation plans.

 
22

 
Index


STOCK PERFORMANCE GRAPH

The following graph illustrates the cumulative total stockholder return on our common stock during the period from September 30, 2004 through September 30, 2009 and compares it with the cumulative total return on the NASDAQ Composite Index and the Philadelphia Semiconductor Index.  The comparison assumes $100 was invested on September 30, 2004 in our common stock and in each of the foregoing indices and assumes reinvestment of dividends, if any.  The performance shown is not necessarily indicative of future performance.  See “Risk Factors” in Part I, Item 1A above.
 

 


 

 
 
9/04
12/04
3/05
6/05
9/05
12/05
3/06
6/06
9/06
12/06
3/07
                       
Cabot Microelectronics Corporation
100.00
110.54
86.57
79.97
81.05
80.80
102.34
83.61
79.50
93.63
92.44
NASDAQ Composite
100.00
114.42
105.44
108.35
113.78
117.06
124.82
116.42
121.50
130.63
131.33
Philadelphia Semiconductor
100.00
115.19
113.31
121.78
128.30
133.37
126.36
116.59
123.32
122.83
121.61

 
6/07
9/07
12/07
3/08
6/08
9/08
12/08
3/09
6/09
9/09
                     
Cabot Microelectronics Corporation
97.90
117.93
99.06
88.69
91.45
88.50
71.92
66.29
78.04
96.17
NASDAQ Composite
140.48
143.37
140.35
120.46
121.34
109.15
82.86
80.72
97.22
112.55
Philadelphia Semiconductor
138.45
140.56
132.62
114.17
118.46
98.45
74.38
80.22
90.50
109.93


 
23

 
Index



ITEM 6.  SELECTED FINANCIAL DATA

The following selected financial data for each year of the five-year period ended September 30, 2009, has been derived from the audited consolidated financial statements.

The information set forth below is not necessarily indicative of results of future operations and should be read in conjunction with Management's Discussion and Analysis of Financial Condition and Results of Operations and the consolidated financial statements and notes to those statements included in Items 7 and 8 of Part II of this Form 10-K, as well as Risk Factors included in Item 1A of Part I of this Form 10-K.



CABOT MICROELECTRONICS CORPORATION
 
SELECTED FINANCIAL DATA - FIVE YEAR SUMMARY
 
(Amounts in thousands, except per share amounts)
 
                               
                               
   
Year Ended September 30,
 
   
2009
   
2008
   
2007
   
2006
     2005*  
Consolidated Statement of Income Data:
                               
      Revenue
  $ 291,372     $ 375,069     $ 338,205     $ 320,795     $ 270,484  
      Cost of goods sold
    162,918       200,596       178,224       171,758       141,282  
                  Gross profit
    128,454       174,473       159,981       149,037       129,202  
                                         
      Operating expenses:
                                       
            Research, development and technical
    48,150       49,155       49,970       48,070       43,010  
            Selling and marketing
    22,239       28,281       24,310       21,115       16,989  
            General and administrative
    40,632       47,595       39,933       34,319       25,427  
            Purchased in-process research and development
    1,410       -       -       1,120       -  
                  Total operating expenses
    112,431       125,031       114,213       104,624       85,426  
      Operating income
    16,023       49,442       45,768       44,413       43,776  
                                         
      Other income, net
    599       5,448       3,606       4,111       2,747  
      Income before income taxes
    16,622       54,890       49,374       48,524       46,523  
      Provision for income taxes
    5,435       16,552       15,538       15,576       14,050  
                  Net income
  $ 11,187     $ 38,338     $ 33,836     $ 32,948     $ 32,473  
                                         
Basic earnings per share
  $ 0.48     $ 1.64     $ 1.42     $ 1.36     $ 1.32  
                                         
Weighted average basic shares outstanding
    23,079       23,315       23,748       24,228       24,563  
                                         
Diluted earnings per share
  $ 0.48     $ 1.64     $ 1.42     $ 1.36     $ 1.32  
                                         
Weighted average diluted shares outstanding
    23,096       23,348       23,754       24,228       24,612  
                                         
Cash dividends per share
  $ -     $ -     $ -     $ -     $ -  
                                         
* We adopted the standards of accounting for share-based payments, effective October 1, 2005. Consequently, the fiscal year ended September 30, 2005
 
had no share-based compensation expense.
                 
                                         
                                         
   
As of September 30,
 
     2009      2008      2007      2006      2005  
Consolidated Balance Sheet Data:
                                       
      Current assets
  $ 316,852     $ 330,592     $ 310,754     $ 261,505     $ 245,807  
      Property, plant and equipment, net
    122,782       115,843       118,454       130,176       135,784  
      Other assets
    75,510       31,002       25,921       20,452       5,172  
            Total assets
  $ 515,144     $ 477,437     $ 455,129     $ 412,133     $ 386,763  
                                         
      Current liabilities
  $ 39,536     $ 37,801     $ 36,563     $ 38,833     $ 35,622  
      Other long-term liabilities
    4,879       5,403       5,362       5,529       12,057  
            Total liabilities
    44,415       43,204       41,925       44,362       47,679  
      Stockholders' equity
    470,729       434,233       413,204       367,771       339,084  
            Total liabilities and stockholders' equity
  $ 515,144     $ 477,437     $ 455,129     $ 412,133     $ 386,763  

 
24

 
Index



ITEM 7.  MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following “Management's Discussion and Analysis of Financial Condition and Results of Operations", as well as disclosures included elsewhere in this Form 10-K, include "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995.  This Act provides a safe harbor for forward-looking statements to encourage companies to provide prospective information about themselves so long as they identify these statements as forward-looking and provide meaningful cautionary statements identifying important factors that could cause actual results to differ from the projected results.  All statements other than statements of historical fact we make in this Form 10-K are forward-looking.  In particular, the statements herein regarding future sales and operating results; Company and industry growth, contraction or trends; growth or contraction of the markets in which the Company participates; international events or various economic factors; product performance; the generation, protection and acquisition of intellectual property, and litigation related to such intellectual property; new product introductions; development of new products, technologies and markets; the acquisition of or investment in other entities; uses and investment of the Company’s cash balance; the construction of facilities by the Company; and statements preceded by, followed by or that include the words "intends", "estimates", "plans", "believes", "expects", "anticipates", "should", "could" or similar expressions, are forward-looking statements.  Forward-looking statements reflect our current expectations and are inherently uncertain.  Our actual results may differ significantly from our expectations.  We assume no obligation to update this forward-looking information.  The section entitled "Risk Factors" describes some, but not all, of the factors that could cause these differences.

The following discussion and analysis should be read in conjunction with our historical financial statements and the notes to those financial statements which are included in Item 8 of Part II of this Form 10-K.


OVERVIEW

Cabot Microelectronics Corporation ("Cabot Microelectronics'', "the Company'', "us'', "we'', or "our'') is the leading supplier of high-performance polishing slurries used in the manufacture of advanced integrated circuit (IC) devices within the semiconductor industry, in a process called chemical mechanical planarization (CMP).  CMP is a polishing process used by IC device manufacturers to planarize or flatten many of the multiple layers of material that are deposited upon silicon wafers in the production of advanced ICs.  Our products play a critical role in the production of the most advanced IC devices, thereby enabling our customers to produce smaller, faster and more complex IC devices with fewer defects.  Demand for our CMP products is primarily driven by the number of wafers processed by semiconductor manufacturers, the first manufacturing step of which is referred to as a “wafer start”.

We operate predominantly in one industry segment – the development, manufacture and sale of CMP consumables.  We develop, produce and sell CMP slurries for polishing many of the conducting and insulating materials used in IC devices, and also for polishing the disk substrates and magnetic heads used in hard disk drives.  We also develop, manufacture and sell CMP polishing pads, which are used in conjunction with slurries in the CMP process.  We also continue to pursue our Engineered Surface Finishes (ESF) business where we believe we can leverage our expertise in CMP consumables for the semiconductor industry to develop products for demanding polishing applications in other industries.

The global economic recession had a significant impact on our business in fiscal 2009.  We first began to see the adverse impact of the recession in our fourth quarter of fiscal 2008 as our semiconductor customers reduced their production, and the downturn in our business continued through the first half of fiscal 2009.  We believe a combination of improved underlying demand and inventory replenishment within the semiconductor industry positively impacted demand for our products during the second half of fiscal 2009 as our revenues improved significantly from the revenues recorded in the first half of the fiscal year.  However, we remain cautious regarding future demand trends over the near term as we are entering a calendar period of typically softer seasonal demand within the semiconductor industry.  Since we cannot predict the exact timing and magnitude of an economic recovery, we plan to continue to manage our business to maintain flexibility and respond quickly to changing trends.  There are many other factors that make it difficult for us to predict future revenue trends for our business, including: the duration of the global economic downturn and the timing and pace of a recovery; the cyclical nature of the semiconductor industry; the short order to delivery time for our products and the associated lack of visibility to future customer orders; quarter to quarter changes in our revenue regardless of industry strength; and potential future acquisitions by us.


 
25

 
Index
 

 
In February 2009, we acquired Epoch Material Co., Ltd. (Epoch), a consolidated subsidiary of Eternal Chemical Co., Ltd. (Eternal).  Epoch is a Taiwan-based company specializing in the development, manufacture and sale of copper CMP slurries and CMP cleaning solutions to the semiconductor industry, and color filter slurries to the liquid crystal display (LCD) industry.  Epoch has a strong presence in Taiwan, which we believe is the largest geographic market for CMP consumables, strong customer relationships in the Asia Pacific region, a significant fixed asset base and strong technical capabilities.  Under the share purchase agreement, we paid $59.4 million on the closing date of February 27, 2009 to obtain 90% of Epoch’s stock and we paid $0.7 million in transaction costs.  We expect to pay an additional $6.6 million to Eternal in August 2010 to acquire the remaining 10% ownership interest and we have placed the $6.6 million in an escrow account in Taiwan to be held for this purpose until the payment date.  During this interim period, Eternal continues to hold the remaining 10% ownership interest in Epoch.  However, Eternal has waived rights to any interest in the earnings of Epoch during the interim period, including any associated dividends.  Consequently, we have recorded a $6.6 million current liability in accrued expenses and other current liabilities on our Consolidated Balance Sheet at September 30, 2009, rather than recording a minority interest in Epoch, and we have recorded 100% of Epoch’s results of operations from February 27, 2009 through the end of our fiscal year in our Consolidated Statement of Income.  See Note 3 of the Notes to the Consolidated Financial Statements for a complete discussion of this acquisition.

Despite the adverse impact of the global economic recession in fiscal 2009 on our slurry products for semiconductor applications, revenue from our CMP polishing pads grew by 17% from fiscal 2008.  Our Six Sigma efforts have enabled us to improve the manufacturing yields in our pad business each quarter since we began high-volume manufacturing in the fourth quarter of fiscal 2007.  We ended fiscal 2009 selling pads to over 20 customers for over 30 applications, and we have more than 30 other potential applications in various stages of testing, evaluation and qualification by our customers.

Revenue for fiscal 2009 was $291.4 million, which represented a decrease of 22.3% from the $375.1 million reported for fiscal 2008.  We believe the decrease in revenue from fiscal 2008 reflects the adverse impact of the global economic recession.  Revenue for the first half of fiscal 2009 was $108.4 million, representing a decrease of over 42% from the $187.9 million of revenue during the first half of fiscal 2008.  Revenue for the second half of fiscal 2009 was $183.0 million, representing a 69% increase from the first half of fiscal 2009 and a 2% decrease from the $187.2 million of revenue in the second half of fiscal 2008.  We believe that the significant increase in revenue during the second half of fiscal 2009 compared to the first half is primarily due to improvement in underlying demand for semiconductors, inventory replenishment, as noted above, as well as traditional seasonal industry strength.  In addition, we generated $13.0 million in revenue from Epoch products between the date of acquisition and September 30, 2009.

Gross profit expressed as a percentage of revenue for fiscal 2009 was 44.1%, which represents a decrease from the 46.5% reported for fiscal 2008.  The decrease in our gross profit margin primarily represents the underutilization of our manufacturing capacity on the significant decrease in sales driven by the global economic recession.  We continue to make improvements in our manufacturing processes and in the quality of our products through our Six Sigma efforts to improve our margins and better serve our customers.  Due the continuing uncertainty in the U.S. and global economy, we are not providing guidance on gross profit margin for fiscal 2010.

Operating expenses of $112.4 million, which include research, development and technical, selling and marketing, and general and administrative expenses, decreased 10.1%, or $12.6 million, from the $125.0 million reported for fiscal 2008.  The decrease was primarily due to lower staffing-related costs, lower professional fees, including fees related to the enforcement of our intellectual property, and lower travel expenses.  These cost savings were partially offset by incremental expenses related to Epoch, including a $1.4 million write-off of in-process research and development expenses required by purchase accounting rules.  The reduction in operating expenses was positively impacted by the focused cost reduction actions that we implemented during the first half of fiscal 2009.  In fiscal 2010, we expect our full year operating expenses to be in the range of $120 million to $125 million, which will include a full year of Epoch expenses and the end of certain temporary cost saving initiatives that we implemented in fiscal 2009.

Diluted earnings per share of $0.48 in fiscal 2009 decreased 70.5%, or $1.16, from $1.64 reported in fiscal 2008 as a result of the factors discussed above.  The Epoch acquisition had an accretive effect on our earnings per share in fiscal 2009.



 
26

 
Index


CRITICAL ACCOUNTING POLICIES AND ESTIMATES

This "Management's Discussion and Analysis of Financial Condition and Results of Operations", as well as disclosures included elsewhere in this Form 10-K, are based upon our audited consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States.  The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingencies.  On an ongoing basis, we evaluate the estimates used, including those related to bad debt expense, warranty obligations, inventory valuation, valuation and classification of auction rate securities, impairment of long-lived assets and investments, business combinations, goodwill, other intangible assets, share-based compensation, income taxes and contingencies.  We base our estimates on historical experience, current conditions and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources, as well as for identifying and assessing our accounting treatment with respect to commitments and contingencies.  Actual results may differ from these estimates under different assumptions or conditions.  We believe the following critical accounting policies involve significant judgments and estimates used in the preparation of our consolidated financial statements.

ALLOWANCE FOR DOUBTFUL ACCOUNTS

We maintain an allowance for doubtful accounts for estimated losses resulting from the potential inability of our customers to make required payments.  Our allowance for doubtful accounts is based on historical collection experience, adjusted for any specific known conditions or circumstances.  While historical experience may provide a reasonable estimate of uncollectible accounts, actual results may differ from what was recorded.  The global economic recession has had adverse effects on our ability to collect accounts receivable from some of our customers.  The recession also caused a small number of our customers to file for bankruptcy or insolvency.  We recorded a $0.9 million increase in our allowance for doubtful accounts during fiscal 2009 to account for these bankruptcies and the increased risk regarding customer collections due to the continued uncertainty in the global economy.  We will continue to monitor the financial solvency of our customers and, if the global economic recession continues, we may have to record additional increases to our allowances for doubtful accounts.  As of September 30, 2009, our allowance for doubtful accounts represented 2.3% of gross accounts receivable.  If we had increased our estimate of bad debts to 3.3% of gross accounts receivable, our general and administrative expenses would have increased by $0.5 million.

WARRANTY RESERVE

We maintain a warranty reserve that reflects management’s best estimate of the cost to replace product that does not meet customers’ specifications and performance requirements, and costs related to such replacement.  The warranty reserve is based upon a historical product replacement rate, adjusted for any specific known conditions or circumstances.  Should actual warranty costs differ substantially from our estimates, revisions to the estimated warranty liability may be required.  As of September 30, 2009, our warranty reserve represented 0.4% of the current quarter revenue.  If we had increased our warranty reserve estimate to 1.4% of the current quarter revenue, our cost of goods sold would have increased by $1.0 million.

INVENTORY VALUATION

We value inventory at the lower of cost or market and write down the value of inventory for estimated obsolescence or if inventory is deemed unmarketable.  An inventory reserve is maintained based upon a historical percentage of actual inventories written off applied against the inventory value at the end of the period, adjusted for known conditions and circumstances.  We exercise judgment in estimating the amount of inventory that is obsolete.  Should actual product marketability and fitness for use be affected by conditions that are different from those projected by management, revisions to the estimated inventory reserve may be required.  If we had increased our reserve for obsolete inventory at September 30, 2009 by 10%, our cost of goods sold would have increased by $0.2 million.


 
27

 
Index
 

 
VALUATION AND CLASSIFICATION OF AUCTION RATE SECURITIES

As of September 30, 2009, we owned two auction rate securities (ARS) with an estimated fair value of $8.1 million ($8.3 million par value) which are classified as other long-term assets on our Consolidated Balance Sheet.  In general, ARS investments are securities with long-term nominal maturities for which interest rates are reset through a Dutch auction every seven to 35 days.  Historically, these periodic auctions provided a liquid market for these securities.  General uncertainties in the global credit markets during 2008 caused widespread ARS auction failures as the number of securities submitted for sale exceeded the number of securities buyers were willing to purchase.  As a result, the short-term liquidity of the ARS market has been adversely affected since then.

As discussed in Notes 4 and 8 of the Notes to the Consolidated Financial Statements, we have recorded a temporary impairment of $0.2 million, net of tax, in the value of one of our ARS in other comprehensive income.  The calculation of fair value and the balance sheet classification for our ARS requires critical judgments and estimates by management including an appropriate discount rate and the probability that a security may be monetized through a future successful auction, of a refinancing of the underlying debt, or of payments made by the bond insurance carrier.  In fiscal 2009, we adopted new accounting pronouncements regarding the classification and valuation of financial instruments.  These pronouncements discuss the recognition and presentation of other-than-temporary impairments and the determination of fair value of financial instruments when the volume of activity significantly drops.  An other-than-temporary impairment must be recorded when a credit loss exists; that is when the present value of the expected cash flows from a debt security is less than the amortized cost basis of the security.  We performed two discounted cash flow analyses, one using a discount rate based on a market index comprised of tax exempt variable rate demand obligations and one using a discount rate based on the LIBOR swap curve, and we applied a risk factor to reflect current liquidity issues in the ARS market.  We then assigned probabilities of holding each security for less than or equal to one year, five years, and to maturity to calculate a fair value for each security.  We also considered the strength of the insurance backing and the probability of failure by the insurance carrier in the case of default by the issuer of the securities.  The impairment we have maintained is considered temporary as it relates to the loss of liquidity in the ARS market and does not represent a credit loss.  We do not intend to sell the securities at a loss and we believe we will not be required to sell the securities at a loss in the future.  If auctions involving our remaining ARS continue to fail, if issuers of our ARS are unable to refinance the underlying securities, if the issuing municipalities are unable to pay their debt obligations and the bond insurance fails, or if credit ratings decline or other adverse developments occur in the credit markets, we may not be able to monetize our remaining securities in the near term and may be required to further adjust the carrying value of these instruments through an impairment charge that may be deemed other-than-temporary.

IMPAIRMENT OF LONG-LIVED ASSETS AND INVESTMENTS

We assess the recoverability of the carrying value of long-lived assets, including finite lived intangible assets, whenever events or changes in circumstances indicate that the assets may be impaired.  We must exercise judgment in assessing whether an event of impairment has occurred.  For purposes of recognition and measurement of an impairment loss, long-lived assets are grouped with other assets and liabilities at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets and liabilities.  We must exercise judgment in this grouping.  If the sum of the undiscounted future cash flows expected to result from the identified asset group is less than the carrying value of the asset group, an impairment provision may be required.  The amount of the impairment to be recognized is calculated by subtracting the fair value of the asset group from the net book value of the asset group.  Determining future cash flows and estimating fair values require significant judgment and are highly susceptible to change from period to period because they require management to make assumptions about future sales and cost of sales generally over a long-term period.  As a result of assessments performed during fiscal 2009, we recorded $1.2 million in impairment expense, primarily related to the write-off of certain research and development equipment.  See Note 6 of the Notes to the Consolidated Financial Statements for more information on this write-off.

We evaluate the estimated fair value of investments annually or more frequently if indicators of potential impairment exist, to determine if an other-than-temporary impairment in the value of the investment has taken place.


 
28

 
Index

 
BUSINESS COMBINATIONS

We have accounted for all business combinations under the purchase method of accounting.  As discussed in more detail in Note 2 of the Notes to the Consolidated Financial Statements, we will be required to adopt new accounting standards for business combinations commencing after October 1, 2009.  We currently allocate the purchase price of acquired entities to the tangible and intangible assets acquired, liabilities assumed, and in-process research and development (IPR&D) based on their estimated fair values.  We engage independent third-party appraisal firms to assist us in determining the fair values of assets and liabilities acquired.  This valuation requires management to make significant estimates and assumptions, especially with respect to long-lived and intangible assets.  Contingent consideration is not recorded as a liability until the outcome of the contingency is determinable.  Goodwill represents the excess of the purchase price over the fair value of net assets and amounts assigned to identifiable intangible assets.  Purchased IPR&D, for which technological feasibility has not yet been established and no future alternative uses exist, is expensed immediately.

Critical estimates in valuing certain of the intangible assets include but are not limited to: future expected cash flows related to acquired developed technologies and patents and assumptions about the period of time the technologies will continue to be used in the Company’s product portfolio; expected costs to develop the IPR&D into commercially viable products and estimated cash flows from the products when completed; and discount rates.  Management’s estimates of value are based upon assumptions believed to be reasonable, but which are inherently uncertain and unpredictable.  Assumptions may be incomplete or inaccurate, and unanticipated events and circumstances may occur which may cause actual realized values to be different from management’s estimates.

GOODWILL AND INTANGIBLE ASSETS

Purchased intangible assets with finite lives are amortized over their estimated useful lives and are evaluated for impairment using a process similar to that used to evaluate other long-lived assets.  Goodwill and indefinite lived intangible assets are not amortized and are tested annually in the fourth fiscal quarter or more frequently if indicators of potential impairment exist, using a fair-value-based approach.

The recoverability of goodwill is measured at the reporting unit level, which is defined as either an operating segment or one level below an operating segment.  We have consistently determined the fair value of our reporting units using a discounted cash flow analysis of our projected future results.  The recoverability of indefinite lived intangible assets is measured using the royalty savings method.  Factors requiring significant judgment include assumptions related to future growth rates, discount factors, royalty rates and tax rates, among others.  Changes in economic and operating conditions that occur after the annual impairment analysis or an interim impairment analysis that impact these assumptions may result in future impairment charges.

Our wholly-owned subsidiary, QED Technologies International, Inc. (QED), was impacted by the global recession more significantly than other areas of our business based on the decline in revenue from fiscal 2008.  As a result, we performed impairment reviews for QED throughout the fiscal year.  QED has goodwill of $5.0 million, indefinite lived intangible assets of $1.2 million and intangible assets subject to amortization of $3.6 million at September 30, 2009.  Our annual impairment analysis for QED in the fourth quarter of fiscal 2009 included current estimates of future cash flows.  Management combines current projections of market and economic data with estimates of our mix of products sold, production costs and operating expenses.  We discounted the resulting projected cash flows over a range of discount rates between 14% and 16%, based upon an analysis of weighted average cost of capital of peer companies of QED.  Although we determined that the goodwill and intangible assets of QED were not impaired, a hypothetical 10% decline in our cash flow projections would have resulted in the calculated fair value of QED being less than its carrying value.  This would have required us to complete additional goodwill impairment testing and may have resulted in an impairment.

As a result of the review performed in the fourth quarter of fiscal 2009, we determined that there was no impairment of our goodwill and intangible assets as of September 30, 2009.


 
29

 
Index

 
SHARE-BASED COMPENSATION

We record share-based compensation expense for all share-based awards, including stock option grants, restricted stock and restricted stock unit awards and employee stock purchases.  We calculate share-based compensation expense using the straight-line approach based on awards expected to ultimately vest, which requires the use of an estimated forfeiture rate.  Our estimated forfeiture rate is primarily based on historical experience, but may be revised in future periods if actual forfeitures differ from the estimate.  We use the Black-Scholes option-pricing model to estimate the grant date fair value of our stock options and employee stock purchases.  This model requires the input of highly subjective assumptions, including the price volatility of the underlying stock, the expected term of our stock options and the risk-free interest rate.  A small change in the underlying assumptions can have a relatively large effect on the estimated valuation.  We estimate the expected volatility of our stock based on a combination of our stock’s historical volatility and the implied volatilities from actively-traded options on our stock.  We calculate the expected term of our stock options using the simplified method, due to our limited amount of historical option exercise data, and we add a slight premium to this expected term for employees who meet the definition of retirement eligible pursuant to terms of their award agreements during the contractual term.  The simplified method uses an average of the vesting term and the contractual term of the option to calculate the expected term.  The risk-free rate is derived from the U.S. Treasury yield curve in effect at the time of grant.

The fair value of our restricted stock and restricted stock unit awards represents the closing price of our common stock on the date of grant.

ACCOUNTING FOR INCOME TAXES

We recognize deferred tax assets and liabilities using enacted tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities.  Deferred tax assets must be reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized.  We have determined that it is more likely than not that our future taxable income will be sufficient to realize our deferred tax assets.  Significant changes to the estimates and judgments that support the calculation of deferred tax assets and liabilities may result in an increase or decrease to our tax provision in a subsequent period.

On October 1, 2007, we adopted the standards for the accounting for uncertain tax positions.  We apply a “more-likely-than-not” threshold for the recognition and derecognition of uncertain tax positions.  The evaluation of uncertain tax positions is based on factors including, but not limited to, changes in tax law, effectively settled issues under audit, new audit activity and changes in facts or circumstances surrounding a tax position.  We evaluate these tax positions on a quarterly basis.

COMMITMENTS AND CONTINGENCIES

We have entered into certain unconditional purchase obligations, which include noncancelable purchase commitments and take-or-pay arrangements with suppliers.  We review our agreements on a quarterly basis and make an assessment of the likelihood of a shortfall in purchases and determine if it is necessary to record a liability.  In addition, we are subject to the possibility of various loss contingencies arising in the ordinary course of business such as a legal proceeding or claim.  An estimated loss contingency is accrued when it is probable that an asset has been impaired or a liability has been incurred and the amount of the loss can be reasonably estimated.  We regularly evaluate current information available to us to determine whether such accruals should be adjusted and whether new accruals are required.


EFFECTS OF RECENT ACCOUNTING PRONOUNCEMENTS

See Note 2 to the Consolidated Financial Statements for a description of recent accounting pronouncements including the expected dates of adoption and effects on our results of operations, financial position and cash flows.



 
30

 
Index

 
RESULTS OF OPERATIONS

The following table sets forth, for the periods indicated, the percentage of revenue of certain line items included in our historical statements of income:

   
Year Ended September 30,
 
   
2009
   
2008
   
2007
 
                   
Revenue
    100.0 %     100.0 %     100.0 %
Cost of goods sold
    55.9       53.5       52.7  
Gross profit
    44.1       46.5       47.3  
                         
Research, development and technical
    16.5       13.1       14.8  
Selling and marketing
    7.6       7.5       7.2  
General and administrative
    14.0       12.7       11.8  
Purchased in-process research and development
    0.5       -       -  
Operating income
    5.5       13.2       13.5  
Other income, net
    0.2       1.4       1.1  
Income before income taxes
    5.7       14.6       14.6  
Provision for income taxes
    1.9       4.4       4.6  
                         
Net income
    3.8 %     10.2 %     10.0 %


YEAR ENDED SEPTEMBER 30, 2009, VERSUS YEAR ENDED SEPTEMBER 30, 2008

REVENUE

Revenue was $291.4 million in fiscal 2009, which represented a decrease of 22.3%, or $83.7 million, from fiscal 2008.  Of this decrease, $97.7 million was due to decreased sales volume driven by the significant weakening of demand for our products due to the global economic recession that we experienced during the first half of fiscal 2009, and $8.5 million due to product mix.  These decreases in revenue were partially offset by $13.0 million in revenue from Epoch products, a $5.7 million revenue increase due to the effect of foreign exchange rate changes and $3.8 million due to a higher weighted-average selling price for our CMP consumable products.  Despite the negative effects of the global economic recession on our slurry products for semiconductor applications and on our ESF business, our revenue from CMP polishing pads and slurries for data storage applications increased from the prior year.  We believe a combination of improved underlying demand and inventory replenishment within the semiconductor industry positively impacted demand for our products during the second half of fiscal 2009 as our revenues improved significantly from the revenues recorded in the first half of the fiscal year.  However, we remain cautious regarding future demand trends over the near term as we are entering a calendar period of typically lower seasonal demand within the semiconductor industry and we cannot predict the exact timing and magnitude of an economic recovery.


COST OF GOODS SOLD

Total cost of goods sold was $162.9 million in fiscal 2009, which represented a decrease of 18.8%, or $37.7 million, from fiscal 2008.  The decrease in cost of goods sold was primarily due to $53.2 million from decreased sales volume due to the global economic recession, $9.8 million from lower fixed manufacturing costs and $5.9 million due to higher manufacturing yields in our CMP slurry and pad production.  These decreases were partially offset by a $16.0 million increase due to a higher-cost product mix, a $9.2 million increase due to lower utilization of our manufacturing capacity on the decreased level of sales, a $4.6 million increase due to the effect of foreign exchange rate changes and a $2.0 million increase in certain other manufacturing variances.


 
31

 
Index
 

 
We implemented a number of cost saving initiatives during the first half of fiscal 2009.  For example, we shortened work schedules in our manufacturing operations on a global basis to more closely match production with demand, but we maintained the flexibility to increase our production levels to meet the increased customer demand for our products that we experienced during the second half of fiscal 2009.  Given the continued uncertainty in the global economic and industry environments, we plan to continue to manage our business to maintain flexibility and to respond quickly to changing economic trends.

Metal oxides, such as silica and alumina, are significant raw materials that we use in many of our CMP slurries.  In an effort to mitigate our risk to rising raw material costs and to increase supply assurance and quality performance requirements, we have entered into multi-year supply agreements with a number of suppliers.  For more financial information about our supply contracts, see “Tabular Disclosure of Contractual Obligations” included in Item 7 of Part II of this Form 10-K.

Our need for additional quantities or different kinds of key raw materials in the future has required, and will continue to require, that we enter into new supply arrangements with third parties.  Future arrangements may result in costs which are different from those in the existing agreements.  In addition, energy costs may also impact the cost of raw materials, packaging, freight and labor costs.  We also expect to continue to invest in our operations excellence initiative to improve product quality, reduce variability and improve product yields in our manufacturing process.


GROSS PROFIT

Our gross profit as a percentage of revenue was 44.1% in fiscal 2009 as compared to 46.5% for fiscal 2008.  The decrease in gross profit expressed as a percentage of revenue was primarily due to the underutilization of our manufacturing capacity on the significantly lower level of sales and a higher-cost product mix, partially offset by lower fixed manufacturing costs and favorable production yields.  Due to continued uncertainty in the global economic and industry environments, we are not providing guidance on gross profit margin for fiscal 2010.


RESEARCH, DEVELOPMENT AND TECHNICAL

Total research, development and technical expenses were $48.2 million in fiscal 2009, which represented a decrease of 2.0%, or $1.0 million, from fiscal 2008.  The decrease was primarily related to $1.7 million in lower staffing-related costs, $0.7 million in lower depreciation expense and $0.4 million in lower travel-related costs.  These cost decreases were partially offset by $1.2 million in pre-tax impairments recorded in fiscal 2009 on certain research and development equipment and $0.4 million in higher expenses for laboratory supplies.

Our research, development and technical efforts are focused on the following main areas:

·  
Research related to fundamental CMP technology;
·  
Development and formulation of new and enhanced CMP consumable products, including collaborating on joint development projects with our customers;
·  
Process development to support rapid and effective commercialization of new products;
·  
Technical support of CMP products in our customers’ manufacturing facilities; and
·  
Evaluation of new polishing and metrology applications outside of the semiconductor industry.


SELLING AND MARKETING

Selling and marketing expenses were $22.2 million in fiscal 2009, which represented a decrease of 21.4%, or $6.0 million, from fiscal 2008.  The decrease was primarily due to $3.9 million in lower staffing related costs, $1.0 million in lower travel-related costs, $0.3 million in lower advertising and trade show costs and $0.3 million in lower professional fees.



 
32

 
Index

 
GENERAL AND ADMINISTRATIVE

General and administrative expenses were $40.6 million in fiscal 2009, which represented a decrease of 14.6%, or $7.0 million, from fiscal 2008.  The decrease resulted primarily from $4.0 million in lower staffing-related costs, primarily related to our annual bonus program and lower share-based compensation expense, and $3.7 million in lower professional fees, including costs to enforce our intellectual property.  These cost savings were partially offset by a $0.9 million increase in our allowance for doubtful accounts due to customer bankruptcies and increased risks relating to customer collections due to the continued uncertainty in the global economy.  See Part I, Item 3 entitled “Legal Proceedings” and Note 17 of the Notes to the Consolidated Financial Statements for more information on the enforcement of our intellectual property.


PURCHASED IN-PROCESS RESEARCH AND DEVELOPMENT

Purchased in-process research and development (IPR&D) expense was $1.4 million in fiscal 2009, related to the acquisition of Epoch in the second quarter of fiscal 2009.  We did not make any acquisitions in fiscal 2008.


OTHER INCOME, NET

Other income was $0.6 million in fiscal 2009, which represented a decrease of 89.0%, or $4.9 million, from fiscal 2008.  The decrease in other income was primarily due to $4.5 million in lower interest income resulting from lower interest rates on our lower average balances of cash and short-term investments.  We monetized the majority of our short-term investments in ARS during fiscal 2008 and reinvested these funds into money market investments which earn interest at lower rates.  See Notes 4 and 8 of the Notes to the Consolidated Financial Statements for more information on our ARS.


PROVISION FOR INCOME TAXES

Our effective income tax rate was 32.7% in fiscal 2009 compared to 30.2% in fiscal 2008.  The increase in the effective tax rate in fiscal 2009 was primarily due to increased tax expense related to share-based compensation and a decrease in tax-exempt interest income, partially offset by increased research and experimentation tax credits.


NET INCOME

Net income was $11.2 million in fiscal 2009, which represented a decrease of 70.8%, or $27.2 million, from fiscal 2008 as a result of the factors discussed above.  The acquisition of Epoch was accretive to earnings in fiscal 2009.



 
33

 
Index

 
YEAR ENDED SEPTEMBER 30, 2008, VERSUS YEAR ENDED SEPTEMBER 30, 2007

REVENUE

Revenue was $375.1 million in fiscal 2008, which represented an increase of 10.9%, or $36.9 million, from fiscal 2007.  Of this increase, $17.2 million was due to increased sales volume including increased contribution from our polishing pad business, $15.2 million was due to a higher weighted average selling price for our CMP consumable products, resulting from a higher-priced product mix, and $4.5 million was due to the effect of foreign exchange rate changes.  Our polishing pad business represented $14.6 million of the revenue growth in fiscal 2008 as we won new business by gaining additional customer adoptions of our pads.


COST OF GOODS SOLD

Total cost of goods sold was $200.6 million in fiscal 2008, which represented an increase of 12.6%, or $22.4 million, from fiscal 2007.  Of this increase, $9.1 million was due to increased sales volume, $9.0 million was due to increased fixed manufacturing costs, primarily in our pad business, $5.3 million was due to lower manufacturing yields, particularly in our pad business, $5.1 million was due to the effects of foreign exchange rate changes, $2.2 million was due to certain other manufacturing variances and $1.5 million was due to increased freight, packaging and other costs.  These increases were partially offset by a $7.5 million benefit of higher utilization of our manufacturing capacity on the increased sales volume and by a $2.3 million benefit of a lower-cost product mix.


GROSS PROFIT

Our gross profit as a percentage of revenue was 46.5% in fiscal 2008 as compared to 47.3% for fiscal 2007.  The decrease in gross profit expressed as a percentage of revenue was primarily due to higher fixed production costs and lower manufacturing yields, both primarily associated with our pad business, and higher manufacturing variances partially offset by a favorable product mix and higher utilization of our manufacturing capacity on the increased volume of sales in fiscal 2008.  The manufacturing yields in our pad business improved over the course of fiscal 2008, and the yields in this business may continue to fluctuate as we optimize our manufacturing process.


RESEARCH, DEVELOPMENT AND TECHNICAL

Total research, development and technical expenses were $49.2 million in fiscal 2008, which represented a decrease of 1.6%, or $0.8 million, from fiscal 2007.  The decrease was primarily due to $0.7 million in lower clean room materials and laboratory supplies and $0.5 million in lower professional fees partially offset by $0.2 million in higher staffing related costs and $0.2 million in increased depreciation expense.


SELLING AND MARKETING

Selling and marketing expenses were $28.3 million in fiscal 2008, which represented an increase of 16.3%, or $4.0 million, from fiscal 2007.  The increase was primarily due to $2.3 million in higher staffing related costs, including employee separation costs, $0.6 million in increased professional fees, $0.3 million in higher travel related costs and $0.3 million in higher depreciation expense.


GENERAL AND ADMINISTRATIVE

General and administrative expenses were $47.6 million in fiscal 2008, which represented an increase of 19.2%, or $7.7 million, from fiscal 2007.  The increase resulted primarily from $5.3 million in higher professional fees, including costs to enforce our intellectual property, and $2.3 million in higher staffing related costs.


 
34

 
Index
 
 
OTHER INCOME, NET

Other income was $5.4 million in fiscal 2008 compared to $3.6 million in fiscal 2007.  The increase was primarily due to the absence of a $2.1 million pre-tax impairment of our equity investment in NanoProducts Corporation (NPC) and the absence of $0.4 million of other expense related to our investment in NPC.  This increase was partially offset by a $0.6 million decrease in interest income as we monetized the majority of our short-term investments in ARS during fiscal 2008 and reinvested these funds into money market investments which earn interest at lower rates.  See Notes 4 and 8 of the Notes to the Consolidated Financial Statements for more information on our ARS.


PROVISION FOR INCOME TAXES

Our effective income tax rate was 30.2% in fiscal 2008 compared to 31.5% in fiscal 2007.  The decrease in the effective tax rate in fiscal 2008 was primarily due to increased research and experimentation tax credits and reduced tax expense related to share-based compensation, partially offset by lower tax-exempt interest income.


NET INCOME

Net income was $38.3 million in fiscal 2008, which represented an increase of 13.3%, or $4.5 million, from fiscal 2007 as a result of the factors discussed above.


LIQUIDITY AND CAPITAL RESOURCES

We had cash flows from operating activities of $44.7 million in fiscal 2009, $70.8 million in fiscal 2008 and $64.6 million in fiscal 2007.  Our cash provided by operating activities in fiscal 2009 originated from $11.2 million in net income and $37.5 million in non-cash items, partially offset by a $4.0 million decrease in cash flow due to a net increase in working capital.  The decrease in cash from operations in fiscal 2009 from fiscal 2008 was primarily due to decreased net income in fiscal 2009 due to the global economic recession, increased accounts receivable due to substantial revenue growth in the second half of fiscal 2009 and the timing of accounts payable and accrued liability payments, including the payment of our annual bonus related to fiscal 2008.  These were partially offset by a decrease in our inventory levels in fiscal 2009 and a decrease in cash used for prepaid expenses and other assets.

We used $69.0 million in investing activities in fiscal 2009, representing $60.5 million used for our acquisition of Epoch, net of $6.2 million in cash acquired, and $8.5 million in purchases of property, plant and equipment.  Cash flows provided by investing activities in fiscal 2008 were $130.3 million.  Net sales of short-term investments were $149.5 million as we monetized the majority of our ARS during fiscal 2008 (as discussed below).  This cash inflow was partially offset by $19.2 million in cash used for purchases of property, plant and equipment primarily for the purchase and installation of a 300-millimeter polishing tool and related metrology equipment for our Asia Pacific technology center and building improvements and equipment to increase our pad production capabilities.  In fiscal 2007, cash used in investing activities was $62.3 million.  We used $47.0 million for net purchases of short-term investments.  Purchases of property, plant and equipment, including the expansion of our pad manufacturing capabilities in the U.S. and Taiwan as well as purchases for QED, were $10.0 million.  We also used $3.0 million to acquire a license of patents and we paid $2.5 million for the earnout payment to the prior owners of QED, related to its revenue performance during the 12 months following our acquisition.  See Note 3 and Note 7 of the Notes to the Consolidated Financial Statements for more information on business combinations and intangible assets.  We estimate that our total capital expenditures in fiscal 2010 will be approximately $13.0 million.


 
35

 
Index
 

 
In fiscal 2009, cash flows provided by financing activities were $0.7 million.  We received $2.2 million from the issuance of common stock related to the exercise of stock options under our Second Amended and Restated Cabot Microelectronics Corporation 2000 Equity Incentive Plan (EIP), as amended and restated September 23, 2008, and shares issued under our Cabot Microelectronics 2007 Employee Stock Purchase Plan (Employee Stock Purchase Plan), as amended and restated January 19, 2009.  These cash inflows were partially offset by $1.1 million in principal payments on capital leases and $0.3 million in repurchases of common stock pursuant to the terms of our EIP for shares withheld to cover payroll taxes on the vesting of restricted stock granted under the EIP.  In fiscal 2008, cash flows used in financing activities were $35.2 million.  We used $39.0 million to repurchase common stock under our share repurchase programs and we made $1.1 million in principal payments under capital lease obligations.  These cash outflows were partially offset by $4.9 million received from the issuance of common stock related to the exercise of stock options and shares issued under our 2007 Employee Stock Purchase Plan.  In fiscal 2007, cash flows used in financing activities were $3.2 million.  This resulted from $10.0 million in purchases of common stock under our share repurchase program and $1.0 million in principal payments under capital lease obligations, partially offset by $7.8 million in net proceeds from the issuance of stock, primarily from the exercise of stock options.

In January 2008, the Board of Directors authorized a share repurchase program for up to $75.0 million of our outstanding common stock.  Shares are repurchased from time to time, depending on market conditions, in open market transactions, at management’s discretion.  We fund share repurchases from our existing cash balance.  We view the program as a flexible and effective means to return cash to stockholders.  The program became effective on the authorization date and may be suspended or terminated at any time, at the Company’s discretion.  No shares were repurchased under this program during fiscal 2009.  There was $50.0 million remaining on this authorization as of September 30, 2009.

We have an unsecured revolving credit facility of $50.0 million with an option to increase the facility to $80.0 million.  Pursuant to an amendment we entered into in October 2008, the agreement extends to November 2011, with an option to renew for two additional one-year terms.  Under this agreement, interest accrues on any outstanding balance at either the lending institution’s base rate or the Eurodollar rate plus an applicable margin.  We also pay a non-use fee.  The amendment did not include any other material changes to the terms of the credit agreement.  Loans under this facility are intended primarily for general corporate purposes, including financing working capital, capital expenditures and acquisitions.  The credit agreement also contains various covenants.  No amounts are currently outstanding under this credit facility and we believe we are currently in compliance with the covenants.

As discussed in Note 3 of the Notes to the Consolidated Financial Statements, we completed the acquisition of Epoch during our second quarter of fiscal 2009.  The total cash outlay was $60.5 million representing $59.4 million in cash paid to Epoch’s shareholders on the first closing date of February 27, 2009, $0.7 million in cash paid for transaction costs and $6.6 million held in an escrow account to be paid to Eternal on the second closing date, in August 2010, partially offset by $6.2 million in cash acquired with Epoch.

At September 30, 2009, we owned two ARS with an estimated fair value of $8.1 million ($8.3 million par value).  We successfully monetized at par value the majority of ARS we owned in fiscal 2008 and reinvested these funds in money market accounts.  We believe that we will be able to monetize the remaining two ARS at par, either through successful auctions, refinancing of the underlying debt by the issuers, payment by the bond insurance carrier, or holding the securities to maturity.  However, we believe it is not likely that our ARS will be monetized within the next operating cycle, which for us is generally one year, so we have classified these securities as long-term assets.

We believe that our current balance of cash and long-term investments, cash generated by our operations and available borrowings under our revolving credit facility will be sufficient to fund our operations, expected capital expenditures, merger and acquisition activities, and share repurchases for the foreseeable future.  However, we plan to further expand our business; therefore, we may need to raise additional funds in the future through equity or debt financing, strategic relationships or other arrangements.  The current uncertainty in the capital and credit markets may hinder our ability to secure additional financing in the type or amount necessary to pursue these objectives.



 
36

 
Index

 
OFF-BALANCE SHEET ARRANGEMENTS

At September 30, 2009 and 2008, we did not have any unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which might have been established for the purpose of facilitating off-balance sheet arrangements.


TABULAR DISCLOSURE OF CONTRACTUAL OBLIGATIONS

The following summarizes our contractual obligations at September 30, 2009, and the effect such obligations are expected to have on our liquidity and cash flow in future periods.


CONTRACTUAL OBLIGATIONS
       
Less Than
     1-3      3-5    
After 5
 
(In millions)
 
Total
   
1 Year
   
Years
   
Years
   
Years
 
                                   
Capital lease obligations
  $ 2.5     $ 1.2     $ 1.3     $ -     $ -  
Operating leases
    6.5       2.3       3.0       0.8       0.4  
Acquisition related
    6.6       6.6       -       -       -  
Purchase obligations
    29.0       23.9       2.3       2.0       0.8  
Other long-term liabilities
    3.6       -       -       -       3.6  
Total contractual obligations
  $ 48.2     $ 34.0     $ 6.6     $ 2.8     $ 4.8  


CAPITAL LEASE OBLIGATIONS

In December 2001, we entered into a fumed alumina supply agreement with Cabot Corporation under which we agreed to pay Cabot Corporation for the expansion of a fumed alumina manufacturing facility in Tuscola, Illinois.  The arrangement for the facility has been treated as a capital lease for accounting purposes and the present value of the minimum quarterly payments resulted in an initial $9.8 million lease obligation and related leased asset.  The initial term of the agreement expired in December 2006, but it was renewed for another five-year term ending in December 2011.

OPERATING LEASES

We lease certain vehicles, warehouse facilities, office space, machinery and equipment under cancelable and noncancelable operating leases, most of which expire within ten years of their respective commencement dates and may be renewed by us.  Operating lease obligations also include certain costs associated with our pad finishing operation located at Taiwan Semiconductor Manufacturing Company, which are accounted for as operating lease payments.

ACQUISITION RELATED

As discussed in Note 3 of the Notes to the Consolidated Financial Statements, we completed the first closing of the acquisition of Epoch during the second quarter of fiscal 2009.  Under the share repurchase agreement, we paid $59.4 million to obtain 90% of Epoch’s stock.  We expect to pay an additional $6.6 million to Eternal on the second closing date to purchase the remaining 10% ownership interest, in August 2010, and we have placed the $6.6 million in an escrow account for this purpose to be held until then.  The escrow account is recorded as short-term restricted cash at September 30, 2009 and is included with prepaid expenses and other current assets on our Consolidated Balance Sheet.  During this interim period, Eternal will continue to hold the remaining 10% ownership interest in Epoch; however, Eternal has waived rights to any interest in Epoch earnings during the interim period, including any associated dividends.  Consequently, we have recorded a $6.6 million current liability on our Consolidated Balance Sheet at September 20, 2009 in accrued expenses and other current liabilities rather than recording a minority interest in Epoch.


 
37

 
Index

 
PURCHASE OBLIGATIONS

We have entered into multi-year supply agreements with Cabot Corporation for the purchase of certain fumed metal oxides.  We purchase fumed silica primarily under a fumed silica supply agreement with Cabot Corporation that became effective in January 2004, and was amended in September 2006 and in April 2008, the latter of which extended the termination date of the agreement from December 2009 to December 2012 and also changed the pricing and some other non-material terms of the agreement to the benefit of both parties.  The agreement will automatically renew unless either party gives certain notice of non-renewal.  We are generally obligated to purchase fumed silica for at least 90% of our six-month volume forecast for certain of our slurry products, to purchase certain non-material minimum quantities every six months, and to pay for the shortfall if we purchase less than these amounts.  We currently anticipate meeting all minimum forecasted purchase volume requirements.  Since December 2001, we have purchased fumed alumina primarily under a fumed alumina supply agreement with Cabot Corporation that has an original term ending in December 2006 and was renewed for another five-year term ending in December 2011.  Prices charged for fumed alumina from Cabot Corporation are pursuant to the terms of the supply agreement and may fluctuate based upon the actual costs incurred by Cabot Corporation in the manufacture of fumed alumina.  Under these agreements, Cabot Corporation continues to be the exclusive supplier of certain quantities and types of fumed silica and fumed alumina for certain products we produced as of the effective dates of these agreements.  Subject to certain terms, these agreements prohibit Cabot Corporation from selling certain types of fumed silica and fumed alumina to third parties for use in CMP applications, as well as engaging itself in CMP applications.  If Cabot Corporation fails to supply us with our requirements for any reason, including if we require product specification changes that Cabot Corporation cannot meet, we have the right to purchase products meeting those specifications from other suppliers.  We also may purchase fumed alumina and fumed silica from other suppliers for certain products, including those commercialized after certain dates related to these agreements and their amendments.  Purchase obligations include an aggregate amount of $6.4 million of contractual commitments related to our Cabot Corporation agreements for fumed silica and fumed alumina.

OTHER LONG-TERM LIABILITIES

Other long-term liabilities at September 30, 2009 consist of liabilities related to our Japan retirement allowance and our liability for uncertain tax positions.


ITEM 7A.  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

EFFECT OF CURRENCY EXCHANGE RATES AND EXCHANGE RATE RISK MANAGEMENT

We conduct business operations outside of the United States through our foreign operations.  Some of our foreign operations maintain their accounting records in their local currencies.  Consequently, period to period comparability of results of operations is affected by fluctuations in exchange rates.  The primary currencies to which we have exposure are the Japanese Yen and the New Taiwan Dollar and, to a lesser extent, the British Pound and the Euro.  From time to time we enter into forward contracts in an effort to manage foreign currency exchange exposure.  However, we may be unable to hedge these exposures completely.  During fiscal 2009, we recorded $0.2 in foreign currency translation gains that are included in other income on our Consolidated Statement of Income.  We also recorded $10.3 million in currency translation gains, net of tax, that are included in other comprehensive income on our Consolidated Balance Sheet.  These gains primarily are the result of general weakening of the U.S. dollar relative to the Japanese Yen.  Approximately 23% of our revenue is transacted in currencies other than the U.S. dollar.  However, we also incur expenses in foreign countries that are transacted in currencies other than the U.S. dollar, so the net exposure on the Consolidated Statement of Income is limited.  We do not currently enter into forward exchange contracts or other derivative instruments for speculative or trading purposes.


 
38

 
Index

 
MARKET RISK AND SENSITIVITY ANALYSIS RELATED TO FOREIGN EXCHANGE RATE RISK

We have performed a sensitivity analysis assuming a hypothetical 10% adverse movement in foreign exchange rates.  As of September 30, 2009, the analysis demonstrated that such market movements would not have a material adverse effect on our consolidated financial position, results of operations or cash flows over a one-year period.  Actual gains and losses in the future may differ materially from this analysis based on changes in the timing and amount of foreign currency rate movements and our actual exposures.


MARKET RISK RELATED TO INVESTMENTS IN AUCTION RATE SECURITIES

At September 30, 2009, we owned two auction rate securities (ARS) with a total estimated fair value of $8.1 million ($8.3 million par value) which were classified as other long-term assets on our Consolidated Balance Sheet.  Beginning in 2008, general uncertainties in the global credit markets caused widespread ARS auction failures as the number of securities submitted for sale exceeded the number of securities buyers were willing to purchase.  As a result, the short-term liquidity of the ARS market has been adversely affected.  For more information on our ARS, see “Risk Factors” set forth in Part I, Item 1A, “Critical Accounting Policies and Estimates” in Management’s Discussion and Analysis of Financial Condition and Results of Operations in Part II, Item 7, and Notes 4 and 8 of the Notes to the Consolidated Financial Statements in Part II, Item 8 of this Annual Report on Form 10-K.



 
39

 
Index


ITEM 8.  FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND FINANCIAL STATEMENT SCHEDULE


   
Page
Consolidated Financial Statements:
 
 
Report of Independent Registered Public Accounting Firm
41
 
Consolidated Statements of Income for the years ended September 30, 2009, 2008 and 2007
43
 
Consolidated Balance Sheets at September 30, 2009 and 2008
44
 
Consolidated Statements of Cash Flows for the years ended September 30, 2009, 2008 and 2007
45
 
Consolidated Statements of Changes in Stockholders’ Equity for the years ended September 30, 2009, 2008 and 2007
  46
 
Notes to the Consolidated Financial Statements
47
 
Selected Quarterly Operating Results
73

Financial Statement Schedule:
 
 
Schedule II – Valuation and Qualifying Accounts
74

All other schedules are omitted, because they are not required, are not applicable, or the information is included in the consolidated financial statements and notes thereto.



 
40

 
Index

Report of Independent Registered Public Accounting Firm

To the Stockholders and Board of Directors of
Cabot Microelectronics Corporation:

In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of Cabot Microelectronics Corporation and its subsidiaries at September 30, 2009 and 2008, and the results of their operations and their cash flows for each of the three years in the period ended September 30, 2009 in conformity with accounting principles generally accepted in the United States of America.  In addition, in our opinion, the financial statement schedule listed in the accompanying index presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements.  Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of September 30, 2009, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).  The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control Over Financial reporting appearing under Item 9A.  Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits.  We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects.  Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation.  Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk.  Our audits also included performing such other procedures as we considered necessary in the circumstances.  We believe that our audits provide a reasonable basis for our opinions.

As discussed in Note 16 to the consolidated financial statements, the Company changed the manner in which it accounts for uncertain tax positions on October 1, 2007, in accordance with standards for accounting for uncertainty in income taxes.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.  A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.


 
41

 
Index

As described in Management’s Report on Internal Control Over Financial Reporting appearing under Item 9A, management has excluded certain elements of the internal control over financial reporting of Epoch (90% owned subsidiary) from its assessment of internal control over financial reporting as of September 30, 2009 because it was acquired by the Company in a business combination on February 27, 2009, midway through fiscal 2009.  Subsequent to the acquisition, certain corporate-level controls were applied to elements of Epoch’s internal control over financial reporting.  Those elements that were not subject to such corporate-level controls have been excluded from management’s assessment of the effectiveness of internal control over financial reporting as of September 30, 2009.  We have also excluded these elements of the internal control over financial reporting of Epoch from our audit of the Company’s internal control over financial reporting.  The excluded elements represent controls over accounts that are 3% and 4% of consolidated total assets and consolidated net sales, respectively, as of and for the year ended September 30, 2009.


/s/PricewaterhouseCoopers LLP
Chicago, IL
November 24, 2009

 
42

 
Index


CABOT MICROELECTRONICS CORPORATION
CONSOLIDATED STATEMENTS OF INCOME
(In thousands, except per share amounts)

   
Year Ended September 30,
 
   
2009
   
2008
   
2007
 
                   
                   
Revenue
  $ 291,372     $ 375,069     $ 338,205  
                         
Cost of goods sold
    162,918       200,596       178,224  
                         
Gross profit
    128,454       174,473       159,981  
                         
Operating expenses:
                       
Research, development and technical
    48,150       49,155       49,970  
Selling and marketing
    22,239       28,281       24,310  
General and administrative
    40,632       47,595       39,933  
Purchased in-process research and development
    1,410       -       -  
Total operating expenses
    112,431       125,031       114,213  
                         
Operating income
    16,023       49,442       45,768  
                         
Other income, net
    599       5,448       3,606  
Income before income taxes
    16,622       54,890       49,374  
                         
Provision for income taxes
    5,435       16,552       15,538  
                         
Net income
  $ 11,187     $ 38,338     $ 33,836  
                         
Basic earnings per share
  $ 0.48     $ 1.64     $ 1.42  
                         
Weighted average basic shares outstanding
    23,079       23,315       23,748  
                         
Diluted earnings per share
  $ 0.48     $ 1.64     $ 1.42  
                         
Weighted average diluted shares outstanding
    23,096       23,348       23,754  

The accompanying notes are an integral part of these consolidated financial statements.


 
43

 
Index


CABOT MICROELECTRONICS CORPORATION
CONSOLIDATED BALANCE SHEETS
(In thousands, except share and per share amounts)
   
September 30,
 
   
2009
   
2008
 
ASSETS
           
Current assets:
           
Cash and cash equivalents
  $ 199,952     $ 221,467  
Short-term investments
    -       4,950  
Accounts receivable, less allowance for doubtful accounts of $1,277 at September 30, 2009, and $403 at September 30, 2008
    53,538       41,630  
Inventories
    44,940       47,466  
Prepaid expenses and other current assets
    14,428       10,714  
Deferred income taxes
    3,994       4,365  
Total current assets
    316,852       330,592  
                 
Property, plant and equipment, net
    122,782       115,843  
Goodwill
    39,732       7,069  
Other intangible assets, net
    18,741       8,712  
Deferred income taxes
    7,953       11,178  
Other long-term assets
    9,084       4,043  
Total assets
  $ 515,144     $ 477,437  
LIABILITIES AND STOCKHOLDERS’ EQUITY
               
Current liabilities:
               
Accounts payable
  $ 15,182     $ 13,885  
Capital lease obligations
    1,210       1,129  
Accrued expenses and other current liabilities
    23,144       22,787  
Total current liabilities
    39,536       37,801  
                 
Capital lease obligations, net of current portion
    1,308       2,518  
Other long-term liabilities
    3,571       2,885  
Total liabilities
    44,415       43,204  
                 
Commitments and contingencies (Note 17)
               
Stockholders’ equity:
               
Common stock:
               
Authorized: 200,000,000 shares, $0.001 par value
               
Issued: 26,143,116 shares at September 30, 2009, and 25,906,990 shares at September 30, 2008
    26       26  
Capital in excess of par value of common stock
    213,031       198,022  
Retained earnings
    334,309       323,122  
Accumulated other comprehensive income
    13,690       3,054  
Treasury stock at cost, 2,698,234 shares at September 30, 2009, and 2,683,809 shares at September 30, 2008
    (90,327     (89,991
Total stockholders’ equity
    470,729       434,233  
                 
Total liabilities and stockholders’ equity
  $ 515,144     $ 477,437  

The accompanying notes are an integral part of these consolidated financial statements.

 
44

 
Index


CABOT MICROELECTRONICS CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
   
Year Ended September 30,
 
   
2009
   
2008
   
2007
 
Cash flows from operating activities:
                 
Net income
  $ 11,187     $ 38,338     $ 33,836  
Adjustments to reconcile net income to net cash provided by operating activities:
                 
Depreciation and amortization
    24,832       25,951       24,170  
Purchased in-process research and development
    1,410       -       -  
Impairment of investment
    -       -       2,052  
Provision for doubtful accounts
    856       (97 )     87  
Share-based compensation expense
    12,802       15,067       12,846  
Deferred income tax expense (benefit)
    (2,064 )     (6,753 )     (6,533 )
Non-cash foreign exchange gain
    (2,731 )     (2,592 )     (539 )
Loss on disposal of property, plant and equipment
    235       598       237  
Impairment of property, plant and equipment
    1,245       4       52  
Other
    938       1,738       256  
Changes in operating assets and liabilities:
                       
Accounts receivable
    (8,519 )     11,849       (3,437 )
Inventories
    8,084       (9,268 )     3,658  
Prepaid expenses and other assets
    4,889       (4,921 )     (525 )
Accounts payable
    (464 )     (2,472 )     1,170  
Accrued expenses, income taxes payable and other liabilities
    (8,003 )     3,397       (2,696 )
Net cash provided by operating activities
    44,697       70,839       64,634  
                         
Cash flows from investing activities:
                       
Additions to property, plant and equipment
    (8,493 )     (19,232 )     (10,013 )
Proceeds from the sale of property, plant and equipment
    1       42       172  
Acquisitions of businesses including earnout payment, net of cash acquired
    (60,520 )     -       (2,500 )
Acquisition of patent license
    -       -       (3,000 )
Purchases of short-term investments
    -       (233,775 )     (155,175 )
    Proceeds from the sale of short-term investments
    50       383,290       108,225  
Net cash provided by (used in) investing activities
    (68,962 )     130,325       (62,291 )
                         
Cash flows from financing activities:
                       
Repurchases of common stock
    (336 )     (39,001 )     (9,995 )
Net proceeds from issuance of stock
    2,206       4,889       7,759  
Principal payments under capital lease obligations
    (1,129 )     (1,072 )     (999 )
Net cash provided by (used in) financing activities
    741       (35,184 )     (3,235 )
                         
Effect of exchange rate changes on cash
    2,009       930       484  
Increase (decrease) in cash
    (21,515 )     166,910       (408 )
Cash and cash equivalents at beginning of year
    221,467       54,557       54,965  
Cash and cash equivalents at end of year
  $ 199,952     $ 221,467     $ 54,557  


Supplemental disclosure of cash flow information:
               
Cash paid for income taxes
  $ 4,283     $ 26,459     $ 22,657  
Cash paid for interest
  $ 338     $ 420     $ 468  
 
Supplemental disclosure of non-cash investing and financing activities:
Purchases of property, plant and equipment in accrued liabilities and accounts payable at the end of period
  $ 429     $ 391     $ 419  
Issuance of restricted stock
  $ 4,209     $ 4,850     $ 4,792  
Assets acquired under capital lease
  $ -     $ 44     $ -  

The accompanying notes are an integral part of these consolidated financial statements.


 
45

 
Index


CABOT MICROELECTRONICS CORPORATION
 
CONSOLIDATED STATEMENT OF CHANGES IN STOCKHOLDERS' EQUITY
 
(In thousands)
 
                                           
                     
Accumulated
                   
         
Capital
         
Other
    Comprehensive 
 
       
   
Common
   
In Excess
   
Retained
   
Comprehensive
   
Income
   
Treasury
       
   
Stock
   
Of Par
   
Earnings
   
Income
   
(net of tax)
   
Stock
   
Total
 
Balance at September 30, 2006
  $ 24     $ 157,463     $ 251,007     $ 272           $ (40,995 )   $ 367,771  
                                                       
Issuance of Cabot Microelectronics restricted stock
                                             
      under deposit share plan     176                                     176  
Issuance of Cabot Microelectronics stock under 
                                             
      Employee Stock Purchase Plan             1,459                                     1,459  
Share-based compensation expense
            12,846                                     12,846  
Exercise of stock options
            6,124                                     6,124  
Repurchases of common stock under share repurchase
                               
      plans, at cost                                             (9,995     (9,995
Net income
                    33,836             $ 33,836                  
Foreign currency translation adjustment
                            1,451       1,451                  
Total comprehensive income
                                  $ 35,287               35,287  
SFAS 158 transition adjustment
                            (464 )                     (464 )
                                                         
Balance at September 30, 2007
  $ 24     $ 178,068     $ 284,843     $ 1,259             $ (50,990 )   $ 413,204  
                                                         
Issuance of Cabot Microelectronics restricted stock 
                                               
      under deposit share plan     165                                       165  
Issuance of Cabot Microelectronics stock under
                                               
      Employee Stock Purchase Plan             1,596                                       1,596  
Share-based compensation expense
            15,067                                       15,067  
Exercise of stock options
    2       3,126                                       3,128  
Repurchases of common stock under share repurchase
                                 
      plans, at cost                                             (39,001     (39,001
Net income
                    38,338             $ 38,338                  
Foreign currency translation adjustment
                            2,341       2,341                  
Unrealized loss on investments
                            (151 )     (151 )                
Minimum pension liability adjustment
                            (395 )     (395 )                
Total comprehensive income
                                  $ 40,133               40,133  
Cumulative effect of adoption FIN 48
                    (59 )                             (59 )
                                                         
Balance at September 30, 2008
  $ 26     $ 198,022     $ 323,122     $ 3,054             $ (89,991 )   $ 434,233  
                                                         
Share-based compensation expense
            12,802                                       12,802  
Repurchases of common stock - other, at cost
                                      (336 )     (336 )
Exercise of stock options
            680                                       680  
Issuance of Cabot Microelectronics restricted stock